change time MAZDA MODEL 6 2016 Quick Guide (in English)

When Driving
1622
Setting the Mazda Radar Cruise Control (MRCC)
How to Set the Distance Between Vehicles During Headway Control
The distance between vehicles is set to a shorter distance each time the switch is
pressed. The distance between vehicles is set to a longer distance by pressing the
switch. The distance-between-vehicles can be set to 4 levels; Long, medium, short,
and extremely short distance.
Distance-between-vehicles
guideline
(at 80 km/h (50 mph)
vehicle speed)
Multi-information displayLong
(about 50 m
(164 ft))Medium
(about 40 m
(131 ft))Short
(about 30 m
(98 ft))Extremely short
(about 25 m
(82 ft))
Change the Set Vehicle Speed
Changing the set vehicle speed using the SET + / SET - switch
To accelerate using the accelerator pedal
Depress the accelerator pedal and press and release the SET + or SET - switch at
the desired speed. If a switch cannot be operated, the system returns to the set
speed when you release your foot from the accelerator pedal.
Active driving display
Multi-information Display
Active Driving Display
Close Proximity Warning
If your vehicle rapidly closes in on the vehicle ahead
because the vehicle applies the brakes suddenly while you
are travelling in headway control, the warning sound
activates and the brake warning is indicated in the display.
Always verify the safety of the surrounding area and
depress the brake pedal while keeping a safer distance
from the vehicle ahead. Additionally, always keep a
safer distance from the vehicles behind you.Press the SET+ switch to accelerate. Press the SET- switch to decelerate. The set
vehicle speed changes as follows each time the SET+/SET- switch is pressed.
Short press
Long pressEuropean models1 km/h (1 mph)
Except European models
5 km/h (5 mph)
10 km/h (5 mph)
For details, refer to Section 4, “i-ACTIVSENSE”.