maintenance MAZDA MODEL 6 2017 (in English) Manual Online

6–69
Maintenance and Care
Appearance Care
WARNING
Dry off brakes that have become
wet by driving slowly, releasing the
accelerator pedal and lightly applying
the brakes several times until the brake
performance returns to normal:Driving with wet brakes is dangerous.
Increased stopping distance or the
vehicle pulling to one side when
braking could result in a serious
accident. Light braking will indicate
whether the brakes have been affected.
Aluminum Wheel Maintenance
A protective coating is provided over the
aluminum wheels. Special care is needed
to protect this coating.
CAUTION
Do not use any detergent other than
mild detergent. Before using any
detergent, verify the ingredients.
Otherwise, the product could discolor
or stain the aluminum wheels.
NOTE
 Do not use a wire brush or any abrasive
cleaner, polishing compound, or solvent
on aluminum wheels. They may damage
the coating.
 Always use a sponge or soft cloth to
clean the wheels.
Rinse the wheels thoroughly with
lukewarm or cold water. Also, be sure
to clean the wheels after driving on
dusty or salted roads to help prevent
corrosion.
 Avoid washing your vehicle in an
automatic car wash that uses high-
speed or hard brushes.
Plastic Part Maintenance
 When cleaning the plastic lenses of the
lights, do not use gasoline, kerosene,
rectified spirit, paint, thinner, highly
acidic detergents, or strongly alkaline
detergents. Otherwise, these chemical
agents can discolor or damage the
surfaces resulting in a significant loss
in functionality. If plastic parts become
inadvertently exposed to any of these
chemical agents, flush with water
immediately.
 If plastic parts such as the bumpers
become inadvertently exposed to
chemical agents or fluids such as
gasoline, oil, engine coolant, or battery
fluid, it could cause discoloration,
staining, or paint peeling. Wipe off any
such chemical agents or fluids using a
soft cloth immediately.
 High water temperature and high water
pressure car washers are available
depending on the type of high pressure
car washer device. If the car washer
nozzle is put too close to the vehicle or
aimed at one area for an extended period
of time, it could deform plastic parts or
damage the paint.
 Do not use wax containing compounds
(polish). Otherwise, it could result in
paint damage.
 In addition, do not use an electrical or
air tool to apply wax. Otherwise, the
frictional heat generated could result
in deformation of plastic parts or paint
damage.
Mazda6_8FH2-EA-16F_Edition2.indb 692016/07/07 13:46:23

6–70
Maintenance and Care
Appearance Care
Interior Care
WARNING
Do not spray water into the vehicle
cabin:Spraying water into the vehicle cabin is
dangerous as electrical devices such as
the audio and switches could get wet
resulting in a malfunction or vehicle
fire.
NOTE
 Do not wipe the interior using alcohol,
chlorine bleach, or organic solvents
such as thinner, benzene, and gasoline.
Otherwise, it may cause discoloration
or stains.
 Rubbing hard with a stiff brush or cloth
may cause damage.
If the vehicle interior becomes soiled
by any of the following, wipe it off
immediately using a soft cloth.
Leaving it uncleaned could cause
discoloration, stains, cracks, or peeling
of the coating, and it will make it hard to
wipe off later.
 Beverage or fragrance Grease or oil Soiling
Seat Belt Maintenance
1. Clean the soiled area by lightly dabbing
it with a soft cloth soaked in a mild
detergent (approx. 5%) diluted with
water.
2. Wipe off the remaining detergent using
a cloth soaked in clean water and
wrung out well.
3. Before retracting seat belts which have
been pulled out for cleaning, dry them
off thoroughly and make sure there is
no remaining moisture on them.
WARNING
If a seat belt appears frayed or has
abrasions, have it replaced by an
Authorized Mazda Dealer:
If a seat belts is used under such a
condition, it cannot function at its full
capacity which could result in serious
injury or death.
Use a mild detergent to remove soiling
from a seat belt: If organic solvents are used for
cleaning the seat belts or they
become stained or bleached, there
is the possibility of them becoming
weakened and as a result, they may
not function at their full capacity
which could cause serious injury or
death.
NOTE
Clean seat belts diligently if they get
dirty. Leaving them uncleaned will make
it difficult to clean them later, and it may
affect the smooth retracting of the seat
belt.
Mazda6_8FH2-EA-16F_Edition2.indb 702016/07/07 13:46:23

6–71
Maintenance and Care
Appearance Care
*Some models.
Vinyl Upholstery Maintenance
Remove dust and dirt from the vinyl
upholstery using a brush or vacuum.
Remove soiling from vinyl upholstery
using a leather and vinyl upholstery
cleaner.
Upholstery Maintenance
1. Clean the soiled area by lightly dabbing
it with a soft cloth soaked in a mild
detergent (approx. 5%) diluted with
water.
2. Wipe off the remaining detergent using
a cloth soaked in clean water and
wrung out well.
Leather Upholstery Maintenance*
1. Remove dust and sand using a vacuum
cleaner.
2. Wipe off the soiled area with a soft
cloth and a suitable, special cleaner or
a soft cloth soaked in a mild detergent
(about 5%) diluted with water.
3. Wipe off the remaining detergent using
a cloth soaked in clean water and
wrung out well.
4. Remove moisture with a dry, soft cloth
and allow the leather to further dry in
a well-ventilated, shaded area. If the
leather gets wet such as from rain,
remove the moisture and dry it as soon
as possible.
NOTE
 Because genuine leather is a natural
material, its surface is not uniform and
it may have natural scars, scratches,
and wrinkles.
 To maintain the quality for as long as
possible, periodical maintenance, about
twice a year, is recommended.
 If the leather upholstery comes into
contact with any of the following, clean
it immediately.
Leaving it uncleaned could cause
premature wear, mold, or stains.
 Sand or dirt Grease or oil, such as hand cream Alcohol, such as in cosmetic or hair
dressing items
 If the leather upholstery gets wet,
promptly remove moisture with a dry
cloth. Remaining moisture on the
surface may cause deterioration such as
hardening and shrinkage.
 Exposure to direct sunlight for long
periods may cause deterioration and
shrinkage. When parking the car under
direct sunlight for long periods, shade
the interior using sunshades.
 Do not leave vinyl products on the
leather upholstery for long periods.
They may affect the leather quality
and coloring. If the cabin temperature
becomes hot, the vinyl may deteriorate
and adhere to the genuine leather.
Plastic Part Maintenance
CAUTION
Do not use polishing agents.
Depending on the product ingredients,
they could cause discoloration, stains,
cracks or peeling of the coating.
Mazda6_8FH2-EA-16F_Edition2.indb 712016/07/07 13:46:23

6–72
Maintenance and Care
Appearance Care
*Some models.
Instrument Panel Top (Soft pad)
Maintenance
Extremely soft material is used for the
soft pad surface. If the soft pad surface is
rubbed harshly with a dry cloth, it could
result in the surface being damaged and
leaving white scratch marks.
1. Wipe the soiled area with a soft cloth
soaked in a mild detergent (approx.
5%) diluted with water.
2. Wipe off the remaining detergent using
a cloth soaked in clean water and
wrung out well.
Active Driving Display
Maintenance*
The combiner and mirror surface have
a special coating. When cleaning it, do
not use a hard cloth, a cloth with a rough
surface, or cleaning detergent. Use a fine-
textured, soft cloth.
If a chemical solvent gets on the combiner
or mirror surface, wipe it off immediately.
Otherwise, they could be damaged and the
surface coating could be scratched.
Panel Maintenance
If a panel becomes soiled, wipe it off with
a soft cloth soaked in clean water and
thoroughly wrung out.
If some areas require further cleaning, use
the following procedure:
1. Wipe the soiled area with a soft cloth
soaked in a mild detergent (approx. 5
%) diluted with water.
2. Wipe off the remaining detergent using
a cloth soaked in clean water and
wrung out well.
NOTE
Be particularly careful when cleaning
shiny surface panels and metallic parts
such as plating as they can be scratched
easily.
Cleaning the Window Interiors
If the windows become covered with an
oily, greasy, or waxy film, clean them with
glass cleaner. Follow the directions on the
container.
CAUTION
 Do not scrape or scratch the inside of
the window glass. It could damage the
thermal filaments and the antenna lines.
 When washing the inside of the window
glass, use a soft cloth dampened in
lukewarm water, gently wiping the
thermal filaments and the antenna lines.
Use of glass cleaning products could
damage the thermal filaments and the
antenna lines.
Mazda6_8FH2-EA-16F_Edition2.indb 722016/07/07 13:46:23

6–73
Maintenance and Care
Appearance Care
Cleaning the Floor Mats
Rubber floor mats should be cleaned with
mild soap and water only.
WARNING
Do not use rubber cleaners, such as tire
cleaner or tire shine, when cleaning
rubber floor mats:
Cleaning the rubber floor mats with
rubber cleaning products makes the
floor mats slippery.
This may cause an accident when
depressing the accelerator, brake, or
clutch (Manual transaxle) pedal or
when getting in or out of the vehicle.
After removing the floor mats for cleaning,
always reinstall them securely (page
3-45).
Mazda6_8FH2-EA-16F_Edition2.indb 732016/07/07 13:46:23

7–4
If Trouble Arises
Flat Tire
Jack
To remove the jack
1. Lift the trunk mat.

T runk mat
2. Remove the pocket.

3. Turn the wing bolt and jack screw
counterclockwise.

W ing bolt
Jack scre w
To secure the jack
1. Insert the wing bolt into the jack with
the jack screw pointing to the front
and turn the wing bolt clockwise to
temporarily tighten it.
2. Turn the jack screw in the direction
shown in the figure.

W ing bolt
Jack scre w
3. Turn the wing bolt completely to secure
the jack.
NOTE
If the jack is not completely secured, it
could rattle while driving. Make sure the
jack screw is sufficiently tightened.
Maintenance
 Always keep the jack clean. Make sure the moving parts are kept
free from dirt or rust.
 Make sure the screw thread is
adequately lubricated.
Spare Tire
Your Mazda has a temporary spare tire.
The temporary spare tire is lighter and
smaller than a conventional tire, and is
designed only for emergency use and
should be used only for VERY short
periods. Temporary spare tires should
NEVER be used for long drives or
extended periods.
Mazda6_8FH2-EA-16F_Edition2.indb 42016/07/07 13:46:25

8–1
8Customer Information and Reporting
Safety Defects
Important consumer information including warranties and add-on
equipment.
Customer Assistance ........................... 8-2
Customer Assistance (U.S.A.) ....... 8-2
Customer Assistance (Canada) ...... 8-7
Customer Assistance

(Puerto Rico) ................................ 8-10
Customer Assistance (Mexico) .... 8-11
Mazda Importer/Distributors .......... 8-13
Importer/Distributor ..................... 8-13
Reporting Safety Defects .................. 8-14
Reporting Safety Defects

(U.S.A.) ........................................ 8-14
Reporting Safety Defects

(Canada) ....................................... 8-15
Warranty ............................................ 8-16
Warranties for Your Mazda .......... 8-16
Outside the United States/

Canada .......................................... 8-17
Registering Your Vehicle in A Foreign
Country (Except United States and
Canada) ........................................ 8-18
Add-On Non-Genuine Parts and
Accessories .................................. 8-19
Cell Phones ........................................ 8-20
Cell Phones Warning .................... 8-20
Event Data Recorder ........................8-21
Event Data Recorder (U.S.A. and
Canada) ........................................ 8-21Recording of Vehicle Data ................
8-22
Recording of Vehicle Data ........... 8-22
Uniform Tire Quality Grading System
(UTQGS) ............................................ 8-23
Uniform Tire Quality Grading System
(UTQGS) ...................................... 8-23
Tire Information (U.S.A.) ................. 8-25
Tire Labeling ................................ 8-25
Location of the Tire Label

(Placard) ....................................... 8-30
Tire Maintenance ......................... 8-33
Vehicle Loading ........................... 8-36
Steps for Determining the Correct
Load Limit ................................... 8-42
Declaration of Conformity ............... 8-43
Declaration of Conformity ........... 8-43
Mazda6_8FH2-EA-16F_Edition2.indb 12016/07/07 13:46:38

8–33
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Tire Maintenance
Improper or inadequate vehicle maintenance can cause tires to wear abnormally. Here are
some important maintenance points:
Tire Inflation Pressure
Inspect all tire pressure monthly (including the spare) when the tires\
are cold. Maintain
recommended pressures for the best ride, top handling, and minimum tire \
wear. Use the
pressures specified on the vehicle tire information placard or tire label for optimum service.
Tire Rotation
To equalize tread wear, rotate the tires every 12,000 km (7,500 miles) at the latest or sooner
if irregular wear develops. Mazda recommends to rotate every 8,000 km (\
5,000 miles) to
help increase tire life and distribute wear more evenly.
Do not include (TEMPORARY USE ONL Y) spare tire in rotation.
Forward
Inspect the tires for uneven wear and damage. Abnormal wear is usually caused by one or a
combination of the following:
 Incorrect tire pressure Improper wheel alignment Out-of-balance wheel Severe braking
After rotation, inflate all tire pressures to specification (page 9-8) and inspect the lug
nuts for tightness.
After adjusting the tire pressure, initialization of the tire pressure m\
onitoring system is
necessary to make the system operate normally.
Refer to Tire Pressure Monitoring System Initialization on page 4-162.
CAUTION
Rotate unidirectional tires and radial tires that have an asymmetrical tread pattern or
studs only from front to rear, not from side to side. Tire performance will be weakened if
rotated from side to side.
Mazda6_8FH2-EA-16F_Edition2.indb 332016/07/07 13:46:40

10–2
Index
A
Accessory Socket ................................5-88
Active Driving Display ....................... 4-29
Active driving display ......................... 4-29
Adaptive Front Lighting System

(AFS) ................................................... 4-90
Add-On Non-Genuine Parts and
Accessories ......................................... 8-19
Advanced Key Advanced keyless entry system .... 3-10
Operational range .......................... 3-11
Advanced Keyless Entry System ........ 3-10
Air Bag/Seat Belt Pretensioner System
Warning Beep ...................................... 7-36
Air Bag Systems ................................. 2-40
Ambient Temperature Display ... 4-18, 4-25
Antilock Brake System (ABS) ............ 4-76
Audio Control Switch Adjusting the Volume ....................5-41
Seek switch .................................... 5-42
Audio System ...................................... 5-13
Antenna ......................................... 5-13
Audio Control Switch ................... 5-41
Audio Set ....................................... 5-21
AUX/USB mode ........................... 5-43
Operating Tips for Audio System ... 5-13
Satellite radio ................................ 5-32
Automatic Transaxle ........................... 4-42
Active Adaptive Shift (AAS) ........4-45
Automatic transaxle controls .........4-42
Direct mode ................................... 4-51
Driving tips .................................... 4-52
Manual shift mode .........................4-45
Shift-lock system ........................... 4-43
Transaxle ranges ............................ 4-44
B
Battery ................................................. 6-35
Inspecting electrolyte level ........... 6-37
Maintenance .................................. 6-37
Recharging .................................... 6-37
Replacement .................................. 6-37
Specifications .................................. 9-4
Battery Runs Out ................................. 7-13
Jump-starting ................................. 7-13
Beep Sounds Blind Spot Monitoring (BSM) system
warning .......................................... 7-38
Electric parking brake warning .....7-39
i-ELOOP ........................................ 7-38
Ignition not switched off (STOP)
warning .......................................... 7-37
Key left-in-trunk compartment
warning .......................................... 7-38
Key left-in-vehicle warning .......... 7-38
Key removed from vehicle

warning .......................................... 7-37
Lane departure warning................. 7-39
Lights-on reminder ........................ 7-36
Request switch inoperable

warning .......................................... 7-38
Seat belt warning ........................... 7-36
Tire inflation pressure warning ..... 7-38
Beep sounds Power steering warning buzzer ..... 7-39
Blind Spot Monitoring (BSM) ............ 4-94
Canceling operation of Blind Spot
Monitoring (BSM) ........................ 4-99
Blind Spot Monitoring (BSM) Warning
Beep .................................................... 7-38
Bluetooth
® ........................................... 5-51
Bluetooth® audio ........................... 5-69
Bluetooth® Hands-Free ..................5-60
Troubleshooting ............................ 5-81
Body Lubrication ................................ 6-32
Mazda6_8FH2-EA-16F_Edition2.indb 22016/07/07 13:46:50

10–4
Index
Ending Screen Display ........................4-85
Engine Coolant .......................................... 6-29
Engine compartment overview ..... 6-25
Exhaust gas .................................... 3-27
Hood release .................................. 6-23
Oil .................................................. 6-26
Starting ............................................ 4-5
Engine Coolant Temperature
Gauge .........................................4-16, 4-24
Essential Information ............................ 6-2
Event Data Recorder ........................... 8-21
Exterior Care ....................................... 6-64
Aluminum wheel maintenance ...... 6-69
Bright-metal maintenance ............. 6-68
Maintaining the finish ................... 6-66
Plastic part maintenance ................ 6-69
F
Flasher
Hazard warning ............................. 4-65
Headlights ..................................... 4-53
Flat Tire ................................................. 7-3
Mounting the spare tire ................. 7-10
Removing a flat tire ......................... 7-7
Floor Mat ............................................ 3-45
Fluid Brake/Clutch ................................. 6-31
Washer ........................................... 6-31
Fluids Classification ................................... 9-4
Fog Lights ........................................... 4-58
Foot Brake ........................................... 4-70
Forward Sensing Camera (FSC) ....... 4-146
Fuel Filler lid and cap ............................ 3-28
Gauge ................................... 4-16, 4-24
Requirements ................................. 3-25
Tank capacity .................................. 9-5
Fuel Consumption Display ................. 4-84Fuel Economy Monitor .......................
4-83
Control Status Display .................. 4-85
Control status display .................... 4-85
Ending Screen Display ..................4-85
Ending screen display ................... 4-85
Fuel Consumption Display ............ 4-84
Fuel consumption display ............. 4-84
Fuses ................................................... 6-57
Panel description ........................... 6-59
Replacement .................................. 6-57
G
Gauges ................................................. 4-12
Glove Compartment ............................ 5-92
H
Hazard Warning Flasher ......................4-65
Hazardous Driving .............................. 3-45
Head Restraint ..................................... 2-13
Headlights Coming home light ........................ 4-57
Control ........................................... 4-53
Flashing ......................................... 4-56
Headlight flashing ......................... 4-56
High-low beam .............................. 4-56
Leaving home light ....................... 4-57
Leveling ......................................... 4-58
High Beam Control System (HBC) .... 4-91
High Beam Control System (HBC)
indicator light (green) .................... 4-93
Hill Launch Assist (HLA) ................... 4-74
HomeLink Wireless Control System ...4-66
Hood Release ...................................... 6-23
Horn .................................................... 4-65
Mazda6_8FH2-EA-16F_Edition2.indb 42016/07/07 13:46:50