steering MAZDA MODEL 6 2018 (in English) Owner's Guide
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2018, Model line: MODEL 6, Model: MAZDA MODEL 6 2018Pages: 863, PDF Size: 14.1 MB
Page 372 of 863
xIf the driver takes his or her hands off
the steering wheel (not holding the
steering wheel), the warning sound is
activated and an alert is indicated in the
multi-information display or the active
driving display.
Active Driving Display Multi-information Display
If the steering wheel is held lightly, or
depending on the road conditions, the
system may detect that you have
released the steering wheel (not holding
the steering wheel) even if you are
holding it, and display a message in the
multi-information display or the active
driving display.
xThe timing at which the lane departure
warning is activated and the steering
wheel operation assist is performed
varies.
xThe following settings for the LAS &
LDWS can be changed. Refer to Safety
Equipment on page 9-14.
xSteering operation assist operational/
non-operational
xCancel sensitivity (likelihood of
steering assist)
9 H K L F O H O D Q H O L Q H G L V S O D \
: K H Q W K H / $ 6 / ' : 6 E H F R P H V
R S H U D W L R Q D O Z K L O H R Q V W D Q G E \ W K H Y H K L F O H
O D Q H O L Q H V D U H G L V S O D \ H G L Q W K H
P X O W L L Q I R U P D W L R Q G L V S O D \ D Q G W K H D F W L Y H
G U L Y L Q J G L V S O D \ , Q W K H Y H K L F O H O D Q H O L Q H V
G L V S O D \ L Q G L F D W L Q J W K H R S H U D W L R Q V W D W X V W K H
F R O R X U R I W K H Y H K L F O H O D Q H O L Q H V E H L Q J
G H W H F W H G F K D Q J H V W R Z K L W H
6 W D Q G E \ V W D W X V
Multi-information Display
Active Driving Display
2 S H U D W L R Q D O V W D W X V
Multi-information Display
Active Driving Display
$ X W R F D Q F H O
, Q W K H I R O O R Z L Q J F D V H V W K H / $ 6 / ' : 6
L V D X W R P D W L F D O O \ F D Q F H O O H G W K H / $ 6
/ ' : 6 Z D U Q L Q J L Q G L F D W L R Q D P E H U W X U Q V
R Q D Q G D Q D O H U W L V G L V S O D \ H G : K H Q W K H
/ $ 6 / ' : 6 E H F R P H R S H U D W L R Q D O W K H
V \ V W H P W X U Q V E D F N R Q D X W R P D W L F D O O \
x 7 K H W H P S H U D W X U H L Q V L G H W K H F D P H U D L V
K L J K R U O R Z
: K H Q ' U L Y L Q J
L $ & 7 , 9 6 ( 1 6 (
Page 376 of 863
▼ / D Q H ' H S D U W X U H : D U Q L Q J
, I W K H V \ V W H P G H W H U P L Q H V W K D W W K H Y H K L F O H P D \ G H Y L D W H I U R P L W V O D Q H W K H O D Q H G H S D U W X U H
Z D U Q L Q J E H H S V R X Q G U X P E O H V R X Q G
R U V W H H U L Q J Z K H H O Y L E U D W L R Q L V D F W L Y D W H G D Q G W K H
G L U H F W L R Q L Q Z K L F K W K H V \ V W H P G H W H U P L Q H V W K D W W K H Y H K L F O H P D \ G H Y L D W H L V L Q G L F D W H G L Q W K H
P X O W L L Q I R U P D W L R Q G L V S O D \ R U W K H D F W L Y H G U L Y L Q J G L V S O D \
, I W K H V \ V W H P G H W H U P L Q H V W K D W W K H Y H K L F O H P D \ G H Y L D W H I U R P L W V O D Q H W K H F R O R X U R I W K H O D Q H
O L Q H R Q W K H V L G H E H L Q J G H W H F W H G E \ W K H V \ V W H P F K D Q J H V I U R P Z K L W H W R D P E H U D Q G I O D V K H V
Multi-information Display Active Driving Display
NOTE
xIf you have set the lane departure warning sound to the beep sound/rumble sound*1
setting, the warning sound may not be heard depending on the surrounding noise
conditions.
xIf you have set the lane departure warning system to the steering wheel vibrations setting,
the vibration may not be felt depending on the road surface conditions.
xWhen the setting for the steering operation assist is changed to operational, the warnings
can be set to activate/not activate. (When the setting for the steering operation assist is
changed to non-operational, the warnings cannot be set to not activate.)
Refer to Setting Change (Safety Equipment) on page 9-14.
xThe LAS & LDWS can be changed to the following settings regardless of whether the
steering operation assist has been set to operational/non-operational. Always check the
setting status when driving the vehicle and make setting changes if necessary.
Refer to Setting Change (Safety Equipment) on page 9-14.
xSteering wheel vibration: Strong/weak
xWarning sound volume
xTypes of warnings (steering wheel vibration/beep sound/rumble sound*1)
: K H Q ' U L Y L Q J
L $ & 7 , 9 6 ( 1 6 (
Page 396 of 863
& $ 8 7 , 2 1
In the following cases, turn the system off to prevent a mis-operation:
¾The vehicle is being towed or when towing another vehicle.
¾The vehicle is on a chassis roller.
¾When driving on rough roads such as in areas of dense grass or off-road.
Refer to Stopping the Advanced Smart City Brake Support (Advanced SCBS) System Operation
on page 4-231 on how to turn off the Advanced SCBS system.
NOTE
xThe Advanced SCBS system will operate under the following conditions.
xThe engine is running.
xThe Smart City Brake Support (SCBS) warning light (amber) does not illuminate.
x(Object is vehicle ahead)
The vehicle speed is between about 4 to 80 km/h (2 to 50 mph).
x(Object is a pedestrian)
The vehicle speed is between about 10 to 80 km/h (6.2 to 50 mph).
xThe Advanced SCBS system is not turned off.
xUnder the following conditions, the Advanced SCBS system may not operate normally:
xThe Advanced SCBS system will not operate if the driver is deliberately performing
driving operations (accelerator pedal and steering wheel).
xIf there is the possibility of partial contact with a vehicle ahead.
xThe vehicle is driven on a slippery road surface such as wet roads or icy or snow-bound
roads.
xThe braking performance is adversely affected due to cold temperatures or wet brakes.
xThe vehicle is driven at the same speed as the vehicle ahead.
xThe accelerator pedal is depressed.
xThe brake pedal is depressed.
xThe steering wheel is being operated.
xThe selector lever is being operated.
xIn the following cases, the Advanced SCBS may operate.
xObjects on the road at the entrance to a curve.
xVehicles passing in the opposite lane while making a curve.
xWhen passing through a toll gate.
xWhen passing through low gates, narrow gates, car washing machines, or tunnels.
xIf you suddenly come close to a vehicle ahead.
x2-wheeled vehicles, animals, or standing trees.
: K H Q ' U L Y L Q J
L $ & 7 , 9 6 ( 1 6 (
Page 399 of 863
& $ 8 7 , 2 1
In the following cases, turn the system off to prevent a mis-operation:
¾The vehicle is being towed or when towing another vehicle.
¾The vehicle is on a chassis roller.
¾When driving on rough roads such as in areas of dense grass or off-road.
Refer to Stopping the Smart City Brake Support [Forward] (SCBS F) system Operation on page
4-234 on how to turn off the SCBS F system.
NOTE
xThe SCBS F system will operate under the following conditions.
xThe engine is running.
xThe Smart Brake Support/Smart City Brake Support (SBS/SCBS) system warning
indication/warning light (amber) does not illuminate.
x(Rear-end collision warning)
The vehicle speed is about 4 to 80 km/h (2 to 50 mph).
x(Brake control (Smart City Brake Support (SCBS) brake))
The vehicle speed is about 4 to 30 km/h (2 to 18 mph).
xThe SCBS F system is not turned off.
xUnder the following conditions, the SCBS F system may not operate normally:
xThe SCBS F system will not operate if the driver is deliberately performing driving
operations (accelerator pedal and steering wheel).
xIf there is the possibility of partial contact with a vehicle ahead.
xThe vehicle is driven on a slippery road surface such as wet roads or icy or snow-bound
roads.
xThe braking performance is adversely affected due to cold temperatures or wet brakes.
xThe vehicle is driven at the same speed as the vehicle ahead.
xThe accelerator pedal is depressed.
xThe brake pedal is depressed.
xThe steering wheel is being operated.
xThe selector lever is being operated.
xIn the following cases, the Forward Sensing Camera (FSC) determines that there is a
vehicle ahead and the SCBS F may operate.
xObjects on the road at the entrance to a curve.
xVehicles passing in the opposite lane while making a curve.
xMetal objects, bumps, or protruding objects on the road.
xWhen passing through a toll gate.
xWhen passing through low gates, narrow gates, car washing machines, or tunnels.
: K H Q ' U L Y L Q J
L $ & 7 , 9 6 ( 1 6 (
Page 402 of 863
Do not apply a strong force to an ultrasonic sensor (rear):
When washing the vehicle, do not spray highly pressurised water against an ultrasonic sensor
(rear), or rub it strongly. In addition, do not hit the rear bumper forcefully when loading and
unloading cargo Otherwise, the sensors may not detect obstructions correctly which could
cause the SCBS R system to not operate normally, or it could operate unnecessarily.
& $ 8 7 , 2 1
¾When driving
off-road in areas where there is grass or foliage, it is recommended that the
SCBS R system be turned off.
¾Always use tyres of the specified size and the same manufacturer, brand, and tread pattern
on all 4 wheels. In addition, do not use tyres with significantly different wear patterns on the
same vehicle. Otherwise, the SCBS R system may not operate normally.
¾If ice or snow is stuck on the ultrasonic sensors (rear) they may not be able to detect
obstructions correctly depending on the conditions. In such cases, the system may not be
able to perform controls correctly. Always drive carefully and pay attention to the rear of
the vehicle.
NOTE
xThe vehicle posture changes depending on the accelerator pedal, brake pedal and
steering wheel operations, which could make it difficult for the system to recognise an
obstruction, or it could facilitate unnecessary detection. In such cases, the SCBS R may or
may not operate.
xThe SCBS R system will operate under the following conditions.
xThe engine is running.
xThe change lever (manual transaxle vehicle) or the selector lever (automatic transaxle
vehicle) is in the R (reverse) position.
x“Smart City Brake Support Reverse Malfunction” is not displayed in the
multi-information display.
xThe vehicle speed is between about 2 to 8 km/h (2 to 4 mph).
xThe SCBS R is not turned off.
xThe DSC is not malfunctioning.
xThe SCBS R operates using ultrasonic sensors (rear) which detect obstructions at the rear
by emitting ultrasonic waves and then receiving the returning waves reflected off the
obstructions.
xIn the following cases, the ultrasonic sensors (rear) cannot detect obstructions and the
SCBS R may not operate.
xThe height of the obstruction is low such as low walls or trucks with low loading
platforms.
: K H Q ' U L Y L Q J
L $ & 7 , 9 6 ( 1 6 (
Page 403 of 863
xThe height of the obstruction is high such as trucks with high loading platforms.
xThe obstruction is small.
xThe obstruction is thin such as a signpost.
xThe obstruction is positioned away from the centre of the vehicle.
xThe surface of the obstruction is not pointed vertically relative to the vehicle.
xThe obstruction is soft such as a hanging curtain or snow stuck to a vehicle.
xThe obstruction is shaped irregularly.
xThe obstruction is extremely close.
xIn the following cases, the ultrasonic sensors (rear) cannot detect obstructions correctly
and the SCBS R may not operate.
xSomething is stuck on the bumper near an ultrasonic sensor (rear).
xThe steering wheel is turned sharply, or the brake or accelerator pedal is operated.
xThere is another obstruction near one obstruction.
xDuring inclement weather such as rain, fog and snow.
xHigh or low humidity.
xHigh or low temperatures
xStrong winds.
xThe path of travel is not flat.
xHeavy luggage is loaded in the luggage compartment or on the rear seat.
xObjects such as a wireless aerial, fog light, or illuminated number plate is installed
near an ultrasonic sensor (rear).
xThe orientation of an ultrasonic sensor (rear) has deviated for reasons such as a
collision.
xThe vehicle is affected by other sound waves such as the horn, engine noise, ultrasonic
sensor of another vehicle.
xIn the following cases, an ultrasonic sensor (rear) may detect something as a target
obstruction which could cause the SCBS R system to operate.
xDriving on a steep slope.
xWheel blocks.
xHanging curtains, gate poles such as at toll gates and railroad crossing.
xWhen travelling near objects such as foliage, barriers, vehicles, walls, and fences along
a road.
xWhen driving off-road in areas where there is grass and forage.
xWhen passing through low gates, narrow gates, car washing machines, and tunnels.
xA towing bar is installed or a trailer is connected.
x(Manual transaxle)
If the vehicle is stopped by the Smart City Brake Support (SCBS) operation and the clutch
pedal is not depressed, the engine stops.
xWhen the system operates, the user is notified by the multi-information display.
: K H Q ' U L Y L Q J
L $ & 7 , 9 6 ( 1 6 (
Page 405 of 863
6 P D U W % U D N H 6 X S S R U W
6 % 6
7 K H 6 % 6 V \ V W H P D O H U W V W K H G U L Y H U R I D
S R V V L E O H F R O O L V L R Q X V L Q J D G L V S O D \ D Q G
Z D U Q L Q J V R X Q G L I W K H U D G D U V H Q V R U I U R Q W
D Q G W K H ) R U Z D U G 6 H Q V L Q J & D P H U D ) 6 &
G H W H U P L Q H W K D W W K H U H L V W K H S R V V L E L O L W \ R I D
F R O O L V L R Q Z L W K D Y H K L F O H D K H D G Z K L O H W K H
Y H K L F O H L V E H L Q J G U L Y H Q D W D E R X W N P K R U
I D V W H U P S K R U I D V W H U ) X U W K H U P R U H L I
W K H U D G D U V H Q V R U I U R Q W D Q G W K H ) R U Z D U G
6 H Q V L Q J & D P H U D ) 6 & G H W H U P L Q H V W K D W D
F R O O L V L R Q L V X Q D Y R L G D E O H W K H D X W R P D W L F
E U D N H F R Q W U R O L V S H U I R U P H G W R U H G X F H
G D P D J H L Q W K H H Y H Q W R I D F R O O L V L R Q
, Q D G G L W L R Q Z K H Q W K H G U L Y H U G H S U H V V H V W K H
E U D N H S H G D O W K H E U D N H V D U H D S S O L H G I L U P O \
D Q G T X L F N O \ W R D V V L V W % U D N H $ V V L V W 6 % 6
E U D N H D V V L V W
: $ 5 1 , 1 *
Do not rely completely on the SBS system
and always drive carefully:
The SBS is designed to reduce damage in
the event of a collision, not avoid an
accident. The ability to detect an
obstruction is limited depending on the
obstruction, weather conditions, or traffic
conditions. Therefore, if the accelerator
pedal or brake pedal is mistakenly
operated it could result in an accident.
Always verify the safety of the surrounding
area and depress the brake pedal or
accelerator pedal while keeping a safer
distance from vehicles ahead or on-coming
vehicles.
& $ 8 7 , 2 1
In the following cases, turn the system off
to prevent a mis-operation:
¾The vehicle is being towed or when
towing another vehicle.
¾The vehicle is on a chassis roller.
¾When driving on rough roads such as in
areas of dense grass or off-road.
NOTE
xThe SBS system operates when all of the
following conditions are met:
xThe ignition is switched ON.
xThe SBS system is on.
xThe vehicle speed is about 15 km/h or
faster (10 mph or faster).
xThe relative speed between your
vehicle and the vehicle ahead is about
15 km/h or faster (10 mph or faster).
xThe Dynamic Stability Control (DSC)
is not operating.
xThe SBS system may not operate under
the following conditions:
xIf the vehicle is accelerated rapidly
and it comes close to a vehicle ahead.
xThe vehicle is driven at the same
speed as the vehicle ahead.
xThe accelerator pedal is depressed.
xThe brake pedal is depressed.
xThe steering wheel is being operated.
xThe selector lever is being operated.
xThe direction indicator is being used.
xWhen the vehicle ahead is not
equipped with tail lights or the tail
lights are turned off.
: K H Q ' U L Y L Q J
L $ & 7 , 9 6 ( 1 6 (
6 R P H P R G H O V
Page 409 of 863
¾The front doors or the liftgate/boot is not fully closed.
¾The vehicle is on a road incline.
¾The door mirrors are retracted.
¾Do not hit the front/rear camera, front bumper, and door mirrors forcefully. The camera
position or installation angle may shift.
¾The cameras are of a waterproof structure. Do not disassemble, modify, or remove a
camera.
¾The camera cover is made of hard plastic, therefore do not apply oil film remover, organic
solvents, wax, or coating agents. If any such agent gets on the camera cover, wipe it off
using a soft cloth immediately.
¾Do not rub the camera lens forcefully, or clean it with an abrasive or hard brush. Otherwise,
it could scratch the camera lens and negatively affect the images.
¾Consult an Authorised Mazda Repairer for repair, painting, or replacement of the front/rear
camera, front bumper and door mirrors.
¾Heed the following cautions to assure that the 360°View Monitor operates normally.
¾Do not modify the suspensions.
¾Always use wheels of the specified type and size for the front and rear wheels. Consult an
Authorised Mazda Repairer for tyre replacement.
¾When the display is cold, images may leave trails or the screen might be darker than usual,
making it difficult to check the vehicle surroundings. Always confirm the safety at the front
and around the vehicle visually when driving.
¾The method for parking/stopping the vehicle using the 360°View Monitor differs depending
on the road circumstances/conditions and the vehicle conditions. When and how much you
turn the steering wheel will differ depending on the situation, , therefore always check the
vehicle surroundings directly with your eyes while using the system.
Also, before using the system, always make sure that the vehicle can be parked/stopped in
the parking/stopping space.
NOTE
xIf there are water droplets, snow, or mud on the camera lens, wipe it off using a soft cloth.
If the camera lens is especially dirty, wash it off with mild detergent.
xIf the area where the camera is installed, such as the liftgate/boot or door mirrors, has
been damaged in a vehicle accident, the camera (position, installation angle) may have
shifted. Always consult an Authorised Mazda Repairer to have the vehicle inspected.
xIf the camera is subjected to excessive changes in temperature such as by pouring hot
water on the camera during cold weather, the 360°View Monitor may not operate
normally.
xIf the battery voltage is low or the engine is restarted by the i-stop function, the screen
might be temporarily difficult to view, however, this does not indicate a problem.
: K H Q ' U L Y L Q J
L $ & 7 , 9 6 ( 1 6 (
Page 424 of 863
+ R Z W R X V H W K H S U R M H F W H G Y H K L F O H S D W K O L Q H I X Q F W L R Q
AB
A
B
C C(Actual condition) (Screen display)
0 D N H V X U H W K D W W K H U H D U H Q R R E V W U X F W L R Q V Z L W K L Q W K H S U R M H F W H G Y H K L F O H S D W K O L Q H V
7 X U Q W K H V W H H U L Q J Z K H H O V R W K D W W K H S U R M H F W H G Y H K L F O H S D W K O L Q H V W U D Y H O L Q V L G H R I W K H
R E V W U X F W L R Q $ D Q G G U L Y H W K H Y H K L F O H I R U Z D U G X Q W L O L W S D V V H V W K H R E V W U X F W L R Q
, I W K H S U R M H F W H G Y H K L F O H S D W K O L Q H V D U H R Q D Q R E V W U X F W L R Q % R U R X W V L G H R I W K H R E V W U X F W L R Q &
W K H Y H K L F O H P D \ F R Q W D F W W K H R E V W U X F W L R Q Z K H Q W X U Q L Q J W K H Y H K L F O H V K D U S O \
& $ 8 7 , 2 1
¾The parking sensor detection range has limitations. For example, obstructions closing in
from the side and objects short in height may not be detected. Always confirm the safety
around the vehicle visually when driving.
For details, refer to the parking sensor obstruction detection indication and warning sound.
Refer to Parking Sensor System on page 4-306.
¾Do not turn the steering wheel any more until the vehicle has passed the obstruction, even
if the obstruction is not visible on the side view image. If the steering wheel is turned even
more, the vehicle may contact the obstruction if it is turned sharply.
NOTE
xBecause there might be a difference between the image displayed on the screen and the
actual conditions, always check the safety of the surrounding area using the mirrors and
directly with your eyes when driving.
xEven though the object displayed on the screen, such as a road curb or a division line of a
parking space, and the vehicle parallel guide lines appear parallel, they may not actually
be parallel.
: K H Q ' U L Y L Q J
L $ & 7 , 9 6 ( 1 6 (
Page 427 of 863
' L V S O D \ , F R Q & R Q W H Q W
% O L Q G 6 S R W 0 R Q L W R U L Q J % 6 0 Z D U Q L Q J
O L J K W V , Q G L F D W H V Z K H Q W K H 5 H D U & U R V V 7 U D I I L F $ O H U W 5 & 7 $ K D V R S H U
D W H G
) R U G H W D L O V U H I H U W R 5 H D U & U R V V 7 U D I I L F $ O H U W 5 & 7 $
5 H I H U W R 5 H D U & U R V V 7 U D I I L F $ O H U W 5 & 7 $ R Q S D J H
NOTE
The setting can be changed so that the projected vehicle path lines are not displayed.
Refer to Safety Equipment on page 9-14.
+ R Z W R X V H W K H S U R M H F W H G Y H K L F O H S D W K O L Q H I X Q F W L R Q
& $ 8 7 , 2 1
¾The front of the vehicle swings out wide when turning the steering wheel while reversing.
Maintain sufficient distance between the vehicle and an obstruction.
¾The parking sensor detection range has limitations. For example, obstructions closing in
from the side and objects short in height may not be detected. Always confirm the safety
around the vehicle visually when driving.
For details, refer to the parking sensor obstruction detection indication and warning sound.
Refer to Parking Sensor System on page 4-306.
NOTE
xBecause there might be a difference between the image displayed on the screen, such as
indicated in the following, and the actual conditions when parking, always check the
safety at the rear of the vehicle and the surrounding area directly with your eyes.
xEven though the back end of the parking space (or garage) displayed on the screen and
distance guide lines appear parallel, they may not actually be parallel.
xWhen parking in a space with a division line on only one side of the parking space, even
though the division line and the vehicle width guide line appear parallel, they may not
actually be parallel.
xThe following shows an example of vehicle parking with the steering wheel turned to the
left while backing up the vehicle. When backing into a parking space from the opposite
direction, the steering operation is reversed.
: K H Q ' U L Y L Q J
L $ & 7 , 9 6 ( 1 6 (