torque MAZDA MODEL 6 HATCHBACK 2005 Quicktips (in English)

Automatic transmission*
P =Park
To move gearshift from Park:
Press firmly on brake pedal
R =Reverse
N =Neutral
No gear engaged
D (Overdrive)
For normal driving: Shifts through
all forward gears automaticallyManual
transmission*
Depress clutch pedal
to start engine and
change gears
WARNINGS: Do not shift into
1st above 20 mph or clutch
failure could occur
Resting your foot on clutch
pedal while driving and using
the clutch to hold your vehicle
at a stand still while waiting
on a hill may reduce clutch life
PRNDM

LOCKS
Always check the Owner’s Manual for more operating information and safety features
Locks
Transmission
Quick Tips 2005 Mazda6 page 10
page 11
Lock
Unlock
Key
Operates ignition and all locks
Tip: Use key number plate
to purchase new key; store
in safe place
Immobilizer system
Prevents engine from running
unless coded key is used; see
Owner’s Manual
Liftgate
(Sport Wagon)
Liftgate is
locked/unlocked
via power door
lock switch or
keyless entry transmitter; pull up
on handle (1) to open liftgateChild-safety locks
Located at the edge of rear doors
To activate: Pull tab up;door opens
from outside only
To cancel: Push tab down
WARNING: Since children
may access either rear door,
child-safety locks for both rear
doors should be activated
Power door
locks
Master front
door lock
switches
To lock/unlock all doors and liftgate:
Press bottom/top of switch (2)
To lock doors without key: With
door open, press bottom of door
lock switch, exit car, close doors
To unlock: Use key to unlock driver’s
front door, rotate key to counter-
clockwise position for morethan
one second to unlock other doors
Manual door locks
Lock button
To lock: Press front of button (3)
toward door handle
To unlock: Pull front of button
away from door handle
Tip: Doors can be locked with
key in ignition (chime sounds
to alert you to key in ignition)
LOCK UNLOCK
23
1
LOCK
UNLOCKLOCK
UN
LOCKRemote
keylessentry
system,
see
Getting Started
Tip: Torque converter lock-up
improves fuel economy and can
feel like an additional gear change
M (Sport A/T
manual shift mode)
Move shifter from
D to M to engage
manual shift mode,
M will be illuminated
for manual mode on
shift position indicator located
in the instrument panel
Manual shifting of transmission
is achieved by moving shifter
back to upshift and forward to
downshift, move shifter from
M to D to engage automatic
shift mode
Gear indicator (A/T only)*Illuminated numeral of gear indicator
located in the instrument panel
displays current gear in Automatic
and Manual shift modes
MD
P
NR
*Denotes optional equipment

HOMELINK®
Always check the Owner’s Manual for more operating information and safety features
HomeLink®
Driving
Tips
Quick Tips 2005 Mazda6 page 18
page 19
Auto-dimming rear
view mirror
Auto-dimming function changes
are based on outside lighting
conditions and if bright headlights
are visible in rear view mirror
Press on (2), off (3)
ABS self test
A self-diagnostic test is performed
when starting; you may feel some
brake pedal pulsation and hear
some noise, this is normal
Traction Control System (TCS)
Enhances traction and safety by
regulating engine torque
When TCS detects drive wheel
slippage it lowers engine torque
to prevent loss of traction Rolling code synchronization
procedure
Refer to your garage door opener or
device instruction manual to confirm
your system is equipped with a
rolling code feature
Tip: This procedure is easier
to perform with the assistance
of another person
To synchronize: Press programming
button on garage door opener
motor; press/hold for 2 seconds
and release the programmed
HomeLink
®button 2 times
within 30 seconds of pressing
the garage door opening
motor programming button
Some devices may require you
to press/hold and release a
third time to complete
programming procedure
If indicator light stays on,
programming is complete
To erase all existing programming;
press and hold two outer
HomeLink
®buttons (1) on mirror,
continue to hold buttons until
indicator light flashes
Anti-lock Braking System (ABS)
ABS automatically reduces
hydraulic pressure to any wheel
on the verge of locking up
You may feel a slight pulsing of
the brake pedal and hear a
clicking noise; this tells you the
ABS is functioning properly;
increase pressure on pedal for
maximum braking
Tips: Maintain constant
pressure on the brake pedal
Do not pump the brakes
To program or reprogram:
Press and hold two outer
HomeLink
®buttons (1) for 20
seconds and no more than
30 seconds, release only after
indicator light (4) begins to
flash; hold transmitter for the
device to be programmed
between 1-3 inches to
HomeLink
®; press transmitter
button and desired HomeLink®
button (1) simultaneously until
HomeLink®indicator light (4)
goes from slow to rapid flashing
Verify device operation by
pressing HomeLink
®button (1)
that was just programmed
Tip: You do not need to repeat
the first step to program the
other two hand-held transmit-
ters for the remaining
HomeLink® buttons
For further information, contact
HomeLink
®at 1-800-355-3515,
www.homelink.comor your
authorized Mazda Dealer
Gas cap
After filling vehicle with gasoline,
fully reinstall gas cap by turning
clockwise until a clicking sound is
heard, if gas cap is not fully
installed, Check Engine light
may come on
For more information on Check
Engine light, see Owner’s Manual HomeLink
®Wireless
Control System*
Located on rear view mirror
HomeLink
®provides three
programmable buttons that
will replace three hand-held
device transmitters
Tip: It is recommended to
park outside of garage when
programming HomeLink
®
WARNING: When programming
a garage door or gate opener,
disconnect power to these
devices before programming,
continuous operation of these
devices could damage the motor
*Denotes optional equipment
11423