lights MAZDA MODEL 626 2001 User Guide

Form No. 8P95-EA-00G
Driving Your MazdaOperating your vehicle requires a good understanding of the many controls you must know and use. Section 5
describes all this in step-by-step information from use of the ignition switch to cruise control and braking.
Also highlighted are the gearshift and shifting modes, power steering, instruments and gaug\
es, warnings and
indicators, windshield wipers, and interior features. You’ll find complete details about the advanced audio
system too.Ignition Switch Positions 5- 2Starting the Engine 5- 4
Manual Transaxle Operation 5- 7 Automatic Transaxle 5- 9
Traction Control System (TCS) 5- 16 Brake System 5- 19
Power Steering 5- 24 Cruise Control 5- 24
Instrument Cluster 5- 30 Gauges 5- 31
Dashboard Illumination 5- 35 Warning Lights/Beeps 5- 35
Lighting Control and Turn Signals 5- 44 Windshield Wipers and Washer 5- 47 Rear Window Defroster 5- 49 Clock 5- 51
Accessory Socket 5- 51 Glove Box 5- 55
Cup Holders 5- 56
Storage Compartments 5- 57 Sunvisors 5- 59
Vanity Mirrors 5- 60
Climate Control System 5- 60
Radio Reception 5- 75
Safety Certification 5- 80
AM/FM Radio with Compact Disc Player 5- 82 AM/FM Radio with Cassette Tape
and Compact Disc Player/Changer (In-Dash CD Changer) 5- 83 Antenna 5-123
5
5-1

Q041-1B1E

Form No. 8P95-EA-00G
Driving Your Mazda5-2

042-1CE
Ignition Switch PositionsWithout immobilizer
system
J94A4001A
 ON
This is the normal running position
after the engine is started. The warning
lights (except brakes) should be
inspected before the engine is started
(page 5-35).
With immobilizer
system
J94S5001
 START
The engine is started in this position. It
will crank until you release the key;
then it returns to the ON position. The
brake warning light can be checked
after the engine is started (page 5-35). 
ACC (Accessory)
The steering wheel unlocks and some
electrical accessories will operate.
 LOCK
The steering wheel locks to protect
against theft. Only in this position can
the key be removed.

Form No. 8P95-EA-00G
*Some models.
Driving Your Mazda5-22

Q047-4AE
J94A4015
BRAKE
 Brake System Warning Light
If the brake warning light stays on
after the parking brake is fully
released, the brake system has a
malfunction. Refer to Warning
Lights/Beeps (page 5-36).
 Q047-5A2E
 Antilock Brake System (ABS)*
The ABS control unit continuously
monitors the speed of each wheel. If
one is about to lock up, the ABS
responds by automatically releasing
and reapplying that wheel’ s brake.
The driver will feel a slight vibration
in the brake pedal and may hear a
chattering noise from the brake
system. This is normal when the ABS
operates. Don’ t pump the brakes,
continue to press down on the brake
pedal.

Q047-7B2E
NOTEIf the ABS warning light stays on
while you’re driving, the ABS
control unit has detected a system
malfunction. If this occurs, your
brakes will function normally as if
the vehicle had no ABS. Should
this happen, consult an Authorized
Mazda Dealer as soon as possible.

Form No. 8P95-EA-00G
Driving Your Mazda5-30050-1AEInstrument Cluster
TachometerTurn signal indicator
Speedometer
Turn signal indicator
Odometer/Trip meter selector Fuel gauge
Water temperature gauge
Warning and indicator lights
Odometer and Trip meter
J94S5002
Warning and indicator lights

Form No. 8P95-EA-00G
Driving Your Mazda
5-35


052-1AE
Dashboard Illumination
Dim
Bright
J94A4028When the parking lights or headlights
are on, rotate the thumb wheel to
adjust the brightness of the dashboard
lights.
Q053-1CE
Warning Lights/Beeps
Warning Lights Inspection
Inspect the warning lights by turning
the ignition switch to the ON position
with the engine off and the parking
brake on. Consult an Authorized
Mazda Dealer about any light that
doesn’ t come on.
If the brake system warning light is off
when the ignition switch is in the
START position, have the system
inspected by an Authorized Mazda
Dealer.
After starting the engine, make sure all
warning lights are off. If one stays on,
it’ s signaling for attention. The brake system warning light should
go off when the parking brake is
released.

Form No. 8P95-EA-00G
Driving Your Mazda5-42If the light flashes rapidly, fails to
come on, or comes on and stays on, it
indicates a system malfunction. If any
of these occur, contact an Authorized
Mazda Dealer as soon as possible.
Security indicator light
When there is no key in the ignition,
and the theft-deterrent system has been
armed, the light will flash once every
three seconds. This indicates that the
system is working properly.
053-18F1E
 Ignition Key Reminder
If the ignition switch is in the LOCK
or ACC position, a beep will sound
when any door is opened.
053-19FE
 Lights-On Reminder
If lights are on and the key is removed
from the ignition switch, a beep will
sound when any door is opened.
053-20A1E
 Headlight High-Beam
Indicator Light
This light indicates one of two things:
• The high-beam headlights are on.
• The turn-signal lever is in the
flash-to-pass position.
053-33AE
Rear Window Defroster
Indicator Light
This light comes on when the rear
window defroster is on.

Form No. 8P95-EA-00G
Driving Your Mazda5-44

054-1C1E
Lighting Control and Turn
Signals
Second stop
First stop
OFF
J94A4029Headlights
To turn on the lights, turn the knob on
the end of the control lever. The first stop (
) turns on the
taillights, dashboard lights, parking
lights, and license plate lights.
The second stop () turns on the
headlights, taillights, dashboard lights,
parking lights, and license plate lights.

054-16AE
If the light switch is left on, the lights
will automatically switch off after 5
seconds of turning of the ignition
switch (LOCK position) or removing
the key.
The light will automatically switch on
when the ignition switch is turned to
the ACC or ON position.

054-2KE
 Lights-on reminder
If lights are on and the key is removed
from the ignition switch, a beep will
sound when the any door is opened.

Form No. 8P95-EA-00G
Driving Your Mazda
5-45
054-4AE
High beams
Low beams
J94A4030 Headlight high-low beam
Push the lever forward for high beams.
Pull it back for low.
The high-beam indicator light on the
dashboard is blue.
054-5AE
J94A4031 Flashing the headlights
To flash the headlights, pull the lever
fully toward you. The headlight switch
need not be on, and the lever will
return to the normal position when
released. The high-beam indicator light on the
dashboard is blue.

Form No. 8P95-EA-00G
In Case of Emergency6-2
071-1A1E
Hazard Warning Flasher
J94A5001
The hazard warning lights warn other
drivers that your vehicle is a traffic
hazard and that they must take
extreme caution when near it.
The hazard warning lights should
always be used when you stop on or
near a roadway.Depress the hazard warning switch
and all four turn signals will flash at
once.
NOTE•
The turn signals don’t work
when the hazard warning lights
are on.
• Check local regulations about
the use of hazard warning lights
while the vehicle is being
towed. They may forbid it.

Q072-3AE
OverheatingIf the temperature gauge indicates
overheating, if you experience power
loss, or if you hear a loud knocking or
pinging noise, the engine is probably
too hot.
If this happens:
1. Drive safely to the side of the road
and park off the right-of-way.
2. Set an automatic transaxle in P, a manual transaxle in neutral. Apply
the parking brake.
3. Turn off the air conditioner.

Form No. 8P95-EA-00G
In Case of Emergency6-8
074-1BE
Fuses
J94A5002
Fuse panel cover
Your vehicle’s electrical system is
protected by fuses.
If any lights, accessories, or controls
don’ t work, inspect the appropriate
circuit protector. If a fuse has blown,
the inside element will be melted. If the same fuse blows again, avoid
using that system and consult an
Authorized Mazda Dealer as soon as
possible.


074-2TE
 Fuse Replacement
If the electrical system doesn’ t work,
first inspect fuses on the driver ’s side.
1. Turn off the ignition switch and other switches.
2. Open the fuse panel.
3. Pull the fuse straight out.