fuse MAZDA MODEL 626 2001 Owners Manual

Form No. 8P95-EA-00G
*Some models.
Your Vehicle at a Glance1-2
004-2AE
Interior Overview
Wiper and washer lever
(page 5-47)Accessory socket
(page 5-51)
Cruise main switch* (page 5-25)
J94S1005_a
(2001)Shoulder belt adjuster (page 2-18)
Seat belt (page 2-14)
Steering wheel (page 3-32)
Fuse panel (page 6-8) Cup holder (page 5-56) Rearview mirror (page 3-35)
Vanity mirror* (page 5-60)
Rear window defroster
switch (page 5-49)
Glove box (page 5-55)
Sunvisor (page 5-59)
Center console (page 5-58)
Side air bags (page 2-35) Passenger-side air bags
(page 2-35)
Driver-side air bags (page 2-35)

Form No. 8P95-EA-00G
Knowing Your Mazda
3-15
CAUTION
!
To prevent burning out the fuse
and damaging the power window
system, don’t open or close more
than two windows at once.
Q008-7A1E
WARNING
!
Children Playing with PowerWindows:Playing with power windows is
dangerous. Someone’ s hands,
head, or neck could get caught in
a closing window. They would be
seriously injured or even killed.
Don’ t let children play with power
windows.
 Q008-5AEOpen Close
J94A2014
 Passenger Door Power Window
Switch
To open the window, push down on its
switch. To close, pull the switch up.
 Q010-1A2E
Trunk LidJ94A2015
Open
Key-Operated Trunk
To open the trunk lid, insert the
primary key and turn it clockwise.
The secondary key will not operate
this lock (page 3-2).

Form No. 8P95-EA-00G
Driving Your Mazda
5-33
Use this meter to measure trip
distances and to compute fuel
consumption.NOTE•Only the trip meters record
tenths of kilometers (miles).
• The trip record will be erased
when;
•The power supply is
interrupted (blown fuse or
the battery is disconnected).
• The vehicle is driven over
999.9 km (miles).
051-4AE
J94S5004
Normal range
Water Temperature Gauge
This gauge shows the temperature of
the engine coolant.
If the needle exceeds normal range
toward H, it indicates overheating.
CAUTION
!
Driving with an overheated engine
can cause serious engine damage
(page 6-2).

Form No. 8P95-EA-00G


*Some models.Driving Your Mazda
5-39

053-55A1E
 Traction Control System
(TCS) Warning Light*
This warning light stays on for a few
seconds when the ignition switch is
turned to the ON position.
The light flashes when the system
regulates engine torque and will stay
on if the system malfunctions. If it
stays on while the system is operating,
consult an Authorized Mazda Dealer.
053-8BE
 Low Fuel Warning Light
This warning signals that the fuel tank
will soon be empty. Get fuel as soon as
possible.

053-9FE
 Check Engine Light
If this light comes on while driving,
the vehicle may have a problem. It is
important to note the driving
conditions when the light came on and
consult an Authorized Mazda Dealer. The check engine light may come on
in the following cases:
•
The fuel tank level being very low
or approaching empty.
• The engine’ s electrical system has a
problem.
• The emission control system has a
problem.
• A ROOM fuse blows or is
removed.
• The fuel-filler cap is missing or not
tightened securely.

Form No. 8P95-EA-00G
Driving Your Mazda5-881. To adjust the time, press the clockbutton for about 2 seconds until a
beep is heard.
2. The clock’ s current time will flash
until the time is set.
Minute set Hour set
07L032–0073. To advance the hours, press the hour set button (H) to advance the
minutes, press the minute set button
(M) while the time is flashing.
4. Press the clock button again to start the clock.
NOTEIf the power supply to the unit is
interrupted (if the fuse blows or
the vehicle’ s battery is
disconnected), the clock will need
to be reset.

Form No. 8P95-EA-00G
Driving Your Mazda
5-91
Band selection
Select AM by pressing the AM button
and FM1 or FM2 by pressing the
FM1/2 button.
The selected mode will be indicated.
If FM stereo is being received, “ST”
will be displayed.NOTEIf the FM broadcast signal
becomes weak, reception
automatically changes from
STEREO to MONO for reduced
noise, and the “ST” indicator will
go out.
 Tuning
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning.
The easiest way to tune stations is to
set them on preset channels.NOTEIf the power supply is interrupted
(fuse blows or the battery is
disconnected), the preset channels
will be canceled.
76Y032-008_a
Higher
frequency
Lower
frequency
Manual tuning
Turning the manual tuning knob will
change to a higher or lower frequency.

Form No. 8P95-EA-00G
Driving Your Mazda
5-93
76Y032-010Preset channel tuning
The six preset channels can be used to
store 6 AM and 12 FM stations.To set a channel first select AM, FM1,
or FM2. Tune to the station you want
and depress a channel preset button for
about 2 seconds until a beep is heard.
The preset channel number and station
frequency will be displayed.
The station is now held in the memory.
Repeat this operation for the other
stations and bands you want to store.
To tune one in the memory, select AM,
FM1, or FM2 and then press its
channel preset button. The station
frequency and the channel number will
be displayed.
NOTEIf the power supply is interrupted
(fuse blows or the battery is
disconnected), the preset channels
will be canceled.

Form No. 8P95-EA-00G
In Case of EmergencyBecause an emergency can occur anytime, we strongly urge you to become familiar with this section of your
manual. It provides helpful information on what to do if the engine overheats, if you have a flat tire, and if the
battery is discharged.
You will also find out what to do if you confront a problem in the electrical system; and, there’s some guidance
on the correct way to tow your Mazda.Hazard Warning Flasher 6- 2Overheating 6- 2
Emergency Starting 6- 4 Fuses 6- 8
Towing 6-16
Flat Tire 6-19
6
6-1
070-1A1E

Form No. 8P95-EA-00G
In Case of Emergency6-8
074-1BE
Fuses
J94A5002
Fuse panel cover
Your vehicle’s electrical system is
protected by fuses.
If any lights, accessories, or controls
don’ t work, inspect the appropriate
circuit protector. If a fuse has blown,
the inside element will be melted. If the same fuse blows again, avoid
using that system and consult an
Authorized Mazda Dealer as soon as
possible.


074-2TE
 Fuse Replacement
If the electrical system doesn’ t work,
first inspect fuses on the driver ’s side.
1. Turn off the ignition switch and other switches.
2. Open the fuse panel.
3. Pull the fuse straight out.

Form No. 8P95-EA-00G
In Case of Emergency
6-9
J94A5003 (J18T5005)
Normal Blown
4. Inspect it and replace if it’s blown.
NOTEThe check engine light comes on
when a ROOM fuse blows or
when a ROOM fuse is removed.
When installing a ROOM fuse,
turn the ignition switch off and
wait 60 seconds before installing
the fuse. If the check engine light
comes on and doesn’t go off, there
is a problem other than the fuse
system. Consult your Authorized
Mazda Dealer.
5. Push in a new fuse of the same rating, and make sure it fits tightly.
If it doesn’ t, have an Authorized
Mazda Dealer install it.
If you have no spare fuses, borrow one
of the same rating from a circuit not
essential to vehicle operation, such as
the RADIO circuit.
CAUTION
!
Always replace a fuse with one of
the same rating. Otherwise you
may damage the electric system.