oil dipstick MAZDA MODEL CX-3 2016 Quick Guide (in English)

22
When Driving
Diesel Particulate Filter
The diesel particulate filter collects and eliminates most of the particulate matter
(PM) in the exhaust gas of the diesel engine for improved exhaust gas processing
ability.
While the particulate matter (PM) collected in the diesel particulate filter is
eliminated automatically, fuel may be mixed with the engine oil increasing the
engine oil level. If the engine oil level exceeds the “X” mark on the dipstick,
replace the engine oil.
For details, refer to Section 4, “Tyre Pressure Monitoring System” or
“Diesel Particulate Filter”.
The Tyre Pressure Monitoring System (TPMS) monitors the air pressure of all
four tyres. If the air pressure of one or more tyres is too low, the system warns the
driver by indicating the tyre pressure monitoring system warning light in the
instrument cluster and operating a beep sound.
In the following cases, system initialization must be performed so that the system
operates normally.
• A tyre pressure is adjusted.
• Tyre rotation is performed.
• A tyre or wheel is replaced.
• The tyre pressure monitoring system warning
light is illuminated.
Tyre Pressure Monitoring System
%:A((''%A'FKVKQPA3WKEM)WKFGKPFD

Maintenance and Care
24
Windscreen washer fluid reservoir
Brake/Clutch fluid reservoir
Engine oil dipstickBattery
Fuse block
Cooling system capEngine coolant reservoir
Engine oil-filler cap
Windscreen washer fluid reservoir
Engine oil dipstick
BatteryFuse block
Engine oil-filler capBrake/Clutch fluid reservoir
Cooling system cap Engine coolant reservoir
Owner Maintenance Precautions
Routine Service
We highly recommend that these items be inspected daily, or at least every week.
• Engine Oil Level
• Engine Coolant Level
• Brake and Clutch Fluid Level
• Washer Fluid Level
• Battery Maintenance
• Tyre Inflation Pressure
For details, refer to Section 6, “Owner Maintenance”.
SKYACTIV-G 2.0
SKYACTIV-D 1.5
%:A((''%A'FKVKQPA3WKEM)WKFGKPFD

Maintenance and Care
25
Inspection and Engine Oil Refill
Selector
If the engine oil level exceeds the “X” mark on the dipstick, replace the engine oil.
When inspecting the engine oil level, pull out the dipstick straight without twisting.
In addition, when inserting the dipstick, always insert it without twisting so that the
“X” mark faces the front of the vehicle.
For details, refer to Section 6, “Owner Maintenance”.
NOTE
The initialization (engine oil data resetting) of the recorded value can be
performed using the following procedure:
1. Switch the ignition OFF.
2. Switch the ignition ON with the selector pressed, and press and hold the
selector for about 5 seconds until the master warning light flashes.
3. After the master warning light flashes for several seconds, the
initialization is completed.
Whenever the engine oil is replaced, the vehicles engine control unit needs to be
reset as soon as possible. Otherwise the wrench indicator light or engine oil warning
light may turn on. To reset the engine control unit, consult an expert repairer, we
recommend an Authorised Mazda Repairer or refer to the vehicle engine control
unit reset procedure.
X Mark MAX MIN
%:A((''%A'FKVKQPA3WKEM)WKFGKPFD