warning MAZDA MODEL CX-3 2018 Smart Start Guide (in English)

[x] Cancel search | Manufacturer: MAZDA, Model Year: 2018, Model line: MODEL CX-3, Model: MAZDA MODEL CX-3 2018
Pages: 50, PDF Size: 3.76 MB

Load previous 10 pages

Page 29 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) m{zd{ c x-3 27 TRAFFI\b \fIGN RE\bOGNITION (IF EQUIPPED) TRAFFIC SIGN RECOGNITION (TSR) SYSTEM The TSR system helps prevent the driver from overlooking traffic signs and provides support for safe$

Page 30 of 50

MAZDA MODEL CX-3 2018 Smart Start Guide (in English) 28 MAZDAUSA.COM
BLIND SPOT MONITORING (BSM)
The BSM system is designed to assist the driver by monitoring blind spots on the left
and right sides of the vehicle in certain situations, such as lan

28 MAZDAUSA.COM
BLIND SPOT MONITORING (BSM)
The BSM system is designed to assist the driver by monitoring blind spots on the left
and right sides of the vehicle in certain situations, such as lane chan\Xges.
•
The B\fM detects vehicles approaching from the rear while traveling in
the forward direction at a speed \.of 6.3 mph or more and notifies the
driver by turning on the B\fM w\.arning indicator light and displaying the vehicle detection screen (vehicles with Active Driving Display).
•
If the turn signal lever is operated to signal a turn in the direction
in which the B\fM warning indicator light is illuminated while the
approaching vehicle is detected, the B\fM warns the driver by turning on the B\fM warning indicator light, and by activating the warning sound and
the warning screen indicator display
(vehicles with Active Driving Display).
•
The detection area on this system
covers the driving lane\.s on both sides
of the vehicle and from the rear part
of the front doors to about 164 ft behind the vehicle.
• B\fM sensors are located under the
left and right rear bumper areas.
The B\fM system may not operate properly if the rear bumper is dirty,
so keep the rear bumper area clean
and free of bumper stickers.
NOTE:
•
The B\fM can assist the driver in confirming the safety
of the surroundings, but is not a complete substitute.
•
The driver is responsible for ensuring safe lane changes
and other maneuvers.
•
Always pay attention to the direction in which th\.e vehicle
is traveling and the vehicle’s surroundings.
Turning BSM System Off:
Turning the B\fM system off will turn off both the light and sound indicators. To turn the B\fM system off, push the B\fM OFF \.switch on the dash.
The B\fM OFF indicator in the instrument cluster will turn on to indicate the B\fM system is off.
NOTE: Turning the B\fM system off will also turn off the Rear \bross Traffic Alert system.
BLIND \fPOT MONITORING \fY\fTEM
WARNING:
B\fM is only a
supplementary
system to help
aid in monitoring
blind spots;
however, B\fM
has limitations.
The system may
not detect all
vehicles, especially
a motorcycle. Do
not rely solely on
the B\fM. Relying
solely on the
B\fM may cause
an unexpected
accident resulting
in death or serious
injury. Make sure
to look over your
shoulder before
changing lanes.
Your
vehicle
Detection areas
ACTIVE DRIVING DISPLA\XY
WHITE Vehicle
Detected
AMBER Vehicle
Detected
with Turn
\fignal On
BSM switch
2940109_18b CX-3 SSG_060817.indd 286/8/17 2:39 PM

Page 31 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) m{zd{ c x-3 29 REAR \bRO\f\f TRAFFI\b ALERT (IF EQUIPPED) REAR CROSS TRAFFIC ALERT (RCTA) The RCTA is designed to alert the driver of oncoming traffic when backing out of a parking spot. RCTA is ac$

Page 42 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) 40 MAZDAUSA.COM GLOSSARY OF WARNING AND INDICATOR LIGHTS Lane Departure Warning System (LDW\f) On (Amber)/ Lane Detected (Green) (p. 24) Lane Departure Warning System (LDW\f) OFF$

Page 43 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) m{zd{ c x-3 41 IN\fTRUMENT \bLU\fTER \fee your Owner’s Manual for more details and explanations. 1 Rotate the knob to adjust the brightness of the instrument cluster and other dashboard illumina$

m{zd{ c x-3 41
IN\fTRUMENT \bLU\fTER
\fee your Owner’s Manual for more details and explanations. 1 Rotate the knob to adjust the brightness of the instrument cluster and other dashboard illuminations.
2 Push to toggle between trip meter (A & B). When a trip meter is selected, push and hold \.to reset to zero.
Push the knob for 1.5 seconds or more to change the speed\. units between mph.
ENGINE COOLANT TEMPERATURE LIGHTS
Since this vehicle does not use an engine coolant temperature gauge, red and blue
engine coolant temperature lights are used to indicate high and low coolant temperature.
Red Coolant Temperature
FLA\fHING: Engine is starting to run hot.
Drive slowly to reduce engine load.
ON: Engine is overheating. \fafely pull
over to the side of the road and turn the
engine off. Refer to the Owner’s Manual for more information. Blue Coolant Temperature
ON: Engine coolant is cold and no warm air is available for heater/defroster.
OFF: Engine coolant is warm and warm air is available for heater/defroster. The light
may stay on for a few minutes after start- up when the engine\. is cold, but the vehicle
can be driven with the light on or off.
TRIP COMPUTER
The following information can be selected by pushing the or of the INFO button on
the steering wheel.
• Approximate distance you can travel on the available fuel (RANGE)
•
Average fuel economy •
\burrent fuel economy • Average vehicle speed

To reset, push and hold th\.e INFO button for more than 1.5 seconds.
OUTSIDE TEMPERATURE DISPLAY
The outside temperature unit can be switched between °\b and °F using\. \fystem \fettings
in the Infotainment \fystem.
IMPORTANT: When your MAZDA \bONNE\bT display setting is set on “AUTO”, the
instrument cluster and display may become dimmer when th\.e headlights are on. If the
display and instrument cluster become too dim or too bright when the headlights are on, simply rotate the dimmer knob \.located on your instrument cluster to adjust the brightness.
TPMS NOTE: Low ambient temperature and/or high altitude may cause tire pressures to
change and turn the TPM\f warning light on. If the warning light comes on, see p. 6.
2940109_18b CX-3 SSG_060817.indd 416/8/17 2:40 PM

Page 48 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) VEHICLE PRESENTATION: Refer to the \fmart \ftart Guide during presentation. ESSENTIAL INFORMATION Driver\bs View • Location of \fwitches and \bontrols Advanced Keyless Entry System* •$

Page 49 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) DEALERSHIPD AT E SALES CONSULTANT CUSTOMER\bS NAME VIN E\fMAIL SALES CONSULTANTD AT ECUSTOMER D AT E PRESENTATION OF OWNER’S MATERIALS: Review the following items with the customer. Smart Star$

Page: < prev 1-10 11-20