MAZDA MODEL CX-3 2018 Smart Start Guide (in English)

Print 2 • August 2017 • Printed in U.\f.A. • 9999 95 003\b 18\f\f
© MAZDA NORTH AMERICAN OPERATIONS
SMART START GUIDE
M{ZD{C X-3
2940109_18b CX-3 SSG_060817.indd 26/8/17 2:36 PM

This easy\fto\fuse SMART START GUIDE provides important information about some unique features and functions of your new vehicle. Additional features are available at mymazda.com and the MyMazda app -> VEHICLE HOW TO. Complete information on features and functions is \Xavailable in your Owner\bs Manual.
2940109_18b CX-3 SSG_060817.indd 36/8/17 2:37 PM

TABLE OF \bONTENT\f
m{zd{ C X-3
2 Driver's View

4
A
dvanced Keyless Entry


5
S
tarting the Engine


6
T
ire Pressure Monitoring System


7
S
eats


8
MAZD
A CONNECT Infotainment System


10
MAZD
A CONNECT Settings


12
C
ommander Switch


13
V
oice Control


14
B
luetooth
®
16 Navigation System

19
A
ctive Driving Display 2
0
Mazda Radar Cruise Control

22 Smart City Brake Support
2
3 Smart Brake Support
24 L
ane Departure Warning System

26 Distance Recognition Support System

27 Traffic Sign Recognition
28 Bl
ind Spot Monitoring System
29 Rear Cross Traffic Alert
3
0 Lighting / Turn Signals
31 Wi
per / Washer Control

32 Adaptive Front\flighting System

33 High Beam Control

34 Audio Controls

36 Audio USB and AUX Inputs
38 A
utomatic Climate Control
39 H
eated Steering Wheel
40 I
nstrument Cluster
42 T
ransmission
44 Pe
rsonalize Your CX\f3
2940109_18b CX-3 SSG_060817.indd 46/8/17 2:37 PM

2 MAZDAUSA.COM
A
B
DRIVER’\f VIEW
DI
G
H
F
E
J
R
C
1 This indicator light turns on to remind you that the front
passenger's front/side airbags and seat belt pretensioner will not
deploy during a collision. The reason for this is that the sensor has
determined that an adult is not sitting in the front passenger seat.
NOTE: If a smaller adult sits on the front passenger seat, the sensors
2940109_18b CX-3 SSG_060817.indd 26/8/17 2:37 PM

m{zd{ c x-3 3
A Lane Departure
Warning System 24
Tire Pressure
Monitoring System 6
B Fuel Filler Lid /
Hood Release —
C Active Driving Display 19
STEERING COLUMN
D Lighting / Turn Signals 30
E Bluetooth
® 14
Voice Control 13
Audio Control 34
F Tilt / Telescoping
Steering Wheel Lever —
G
Instrument Cluster
and Indicator Lights 40
H Cruise Control 20
I Wiper / Washer Control 31
CENTER CONSOLE
J Start / Stop Engine 5
K MAZDA CONNECT
Infotainment System 8
L Hazard Warning —
M Passenger\bs Airbag
OFF Indicator
1 —
N Heated Seats —
O Heated Steering Wheel 39
P Climate Control 38
Q USB / AUX / 12 Volt 36
R
Commander Switch 12
S Drive Selection 42
DRIVER’\f VIEW
O
K
L
NN
S
Q
M
P
might detect the adult as being a child depending on the person’s
physique and may deactivate the front passenger’s front/side
airbags and seat belt pretensioner. Always wear your seat belt and secure children in the rear seats in appropriate child restraints. \fee the Owner’s Manual for important information on this safety feature.
2940109_18b CX-3 SSG_060817.indd 36/8/17 2:37 PM

4 MAZDAUSA.COM
ADVANCED KEYLESS ENTRY SYSTEM
This system allows you to lock and unlock t\Xhe doors without taking the key out.While Carrying the Advanced Key:•
Unlock the driver’s door by pushing
the driver’s door request switch once.
•
Unlock all doors by pushing the
driver’s door request switch once or twice (depending on personalization
setting, p. 10) OR by pushing the passenger’s door request switch once.
•
Lock all doors (and liftgate) by
pushing any request switch once.
•
To open the liftgate from outside
the vehicle: Open the p\.ower liftgate using the liftgate opener.
NOTE: Only vehicles equipped with th\.e
Advanced Keyless Entry \fystem allow you to lock and unlock \.the doors with the
door request switches (without taking the key out of your purse or pocket).
Vehicles equipped with th\.e Keyless Entry \fystem do not have request switches on the doors/liftgate. To lock and unlock \.the doors, the corresponding
transmitter button must be pushed.
Refer to your Owner’s Manual for additional details about
“Personalization Features”.
Door request switch
Lock
Unlock
Panic
alarm
Liftgate
request switch Liftgate

opener
CAUTION:
The key may not
be detected if
placed in the cup holder or too far
from the \fTART/
\fTOP ENGINE button. If the RED
KEY indicator light illuminates
in the instrument
cluster, the key is not being
detected. Move the key closer to
the \fTART/\fTOP
ENGINE button.
CAUTION:
Make sure the
engine is OFF and take the key with
you when leaving the vehicle.
When locking the doors using
the inside door
switches, be
careful not to leave the key
inside the vehicle
to prevent lock-out.
ADVAN\bED KEYLE\f\f ENTRY
(IF EQUIPPED)
2940109_18b CX-3 SSG_060817.indd 46/8/17 2:37 PM

m{zd{ c x-3 5
STARTING THE ENGINE WITH ACCELERATED WARM-UP SYSTEM (AWS)
The CX\f3 is equipped with \XSKYACTIV combustion
technology. This technology includes AWS for optimal
emission performance during cold\fstart conditions.
While Carrying the Advanced Key: •
\fTART THE ENGINE by pushing the \fTART/\fTOP ENGINE
button while pushing t\.he brake pedal.
•
WHAT WILL YOU NOTI\bE? On start-up, the engine speed\.
and sound are elevated (1500 RPM) for less than one minute to quickly bring th\.e catalyst to efficient operating temperature. The RPM will reduce to idle once the
temperature is achieved. This is normal engi\.ne operation under cold-start conditions.
• WHAT DOE\f THI\f DO? This reduces emissions and allows Mazda to improve efficiency.
•
\fHUT THE ENGINE OFF\. by making sure the vehicle is in Park and setting the electric \.
parking brake, then push the \fTART/\fTOP ENGINE button.
•
A\bTIVATE A\b\bE\f\fORIE\f (A\b\b) by pushing the \fTART/\fTOP ENGINE button once
without pushing th\.e brake pedal.
•
TURN THE IGNITION \.TO THE ON PO\fITION by pushing the \fTART/\fTOP ENGINE button
twice without pushing \.the brake pedal.
EMERGENCY ENGINE STOP
Pushing and holdin\.g the \fTART/\fTOP ENGINE button or repeatedly pushing the
\fTART/\fTOP ENGINE button while the engin\.e is running will \.turn the engine OFF\.. Use only in case of an emergency.
NOTE: You can drive the vehicle during AW\f activation; there is no need to wait. The
engine may not start if the key cannot be detected. The key indicator light may flash RED
or “Key not detected” may be displayed if the key is placed in the cup holder.
If the \fTART/\fTOP ENGINE button indicator light flashes AMBER, this could indicate a
problem with the eng\.ine starting system. You may not be able to start the engine or
switch the ignition to A\b\b or ON. Have your vehicle inspected at an Authorized Mazda Dealer as soon as possible.
\fTARTING THE ENGINE
START/STOP ENGINE button
2940109_18b CX-3 SSG_060817.indd 56/8/17 2:37 PM

6 MAZDAUSA.COM
TIRE PRESSURE MONITORING SYSTEM (TPMS)
For your safety, the CX\f3 is
equipped with TPMS that detects low tire pressure in one or more
tires. If the tire pressure starts
getting low in one or more tires, the system alerts the driver by
turning on a light in the instrument
cluster (p. 40\f41) and sounding an
alarm.
WHAT TO DO? Don’t ignore the TPM\f warning light. \ftop and check
your tire pressure (when tires are cold) and inflate the tires to the proper pressure. Properly inflated tires are safer, last longer, and increase fuel economy.
In the following cases, the TPMS must be “initialized” so the system
can operate normally.
• The tire pressure is adjusted (up or down) in one or more tires.
• A tire rotation is performed.
• Any tire or wheel is replaced.
•
The vehicle’s battery is disconnected, replaced or completely dead.
INITIALIZATION PROCESS
(TPMS WARNING LIGHT IS ILLUMINATED)
1 Park the vehicle in a safe place and firmly apply \.the parking brake.
2
Let the tires cool, then adjust the tire pressure to the specified
pressure (see tire label located on the driver’s side door jamb a\.rea)
on all four tires.
3 \fwitch the ignition ON\., but leave the vehicle parked.
4
Push and hold the \.TPM\f “\fet \fwitch" (left side of dash) until the
TPM\f warning light in the instrument cluster flashes twice and a beep sound is heard once.
NOTE: Drastic changes in temperature or altitude can affect the air
pressure in the tires and may cause the TPM\f warning light to turn on.
Verify the tire pressures when driving thr\.ough extreme temperature or altitude changes.
TPMS “Set Switch”
TIRE PRE\f\fURE MONITORING \fY\fTEM
CAUTION:
If the TPM\f “\fet
\fwitch” is pushed
without adjusting the tire pressure,
the system
cannot detect the normal tire
pressure. The
TPM\f warning light may not turn
on, even if the tire pressure is low, or it may turn on if
the tire pressure is normal.
2940109_18b CX-3 SSG_060817.indd 66/8/17 2:37 PM

m{zd{ c x-3 7
FOLDING REAR SEATS
Push the button to fold down the seatback.
(Left rear seat release is shown.)
NOTE: For tall drivers and front passengers who adjust the
front seats all the way back, the headrests on the rear seats
need to be removed when folding the rear
seatbacks down. If not removed, the rear headrest will push into the front seatback.
In order to remove the headrest from
the rear seat, the seatback needs to
be tilted slightly forward.
RETURNING REAR SEATS TO UPRIGHT POSITION:
1 Install the headrest (if removed).
2 Raise the seatbacks until they lock into position.
3
Pull on the top of the seatbacks to make sure they are locked.
4
\bheck that all seat belts are routed properly for passenger use.
MEMORY SEAT SWITCH (IF EQUIPPED)
To Program the Driver’s \feat and Active Driving Display
position/brightness Memory Position.
1 Turn the ignition s\.witch off.
2
Adjust seat to the desired position using the s\.lide/tilt and
recline switches. Adjust the Active Driving Display position/brightness using the MAZDA \bONNE\bT settings. Push and
hold the memory seat \fET button until a beep is heard.
3 Within 5 seconds:
• To program a memory seat button, push and hold \.memory button 1 or 2 until a beep
sound is heard.
•
To program a key, push and hold th\.e key unlock button until a beep sound is heard
(two registered keys can be programmed).
Unlocked
Locked
Memory seat switch
\fEAT\f

FUEL ECONOMY:
To achieve the best fuel economy, visit www.fueleconomy.gov
for more information.
2940109_18b CX-3 SSG_060817.indd 76/8/17 2:38 PM

8 MAZDAUSA.COM
MAZDA CONNECT INFOTAINMENT SYSTEM
MAZDA CONNECT is designed to be operated using one of the following three interfaces:
1 The commander switch (p. 12).
2 Voice control (p. 13).
3 The touchscreen (if the vehicle is moving at speeds bel\.ow 5 mph).
MAZDA \bONNE\bT INFOTAINMENT \fY\fTEM

APPLICATIONS
This section is for
vehicle maintenance features and
driver’s information.
ENTERTAINMENT
This section is for
music features. AM,
FM, XM, Bluetooth
®,
Aha, Pandora, \ftitcher, U\fB, \bD, and AUX
are available.
2940109_18b CX-3 SSG_060817.indd 86/8/17 2:38 PM