brake MAZDA MODEL CX-30 2019 Owners Manual (in English)

Interior Equipment (View C)
▼Interior Equipment (View C)
ƒHead restraint................................................................................... page 2-15
„Front seat........................................................................................... page 2-4
…Seat belt........................................................................................... page 2-20
†Bottle holder.....................................................................................page 5-38
‡Vanity mirror..................................................................................... page 5-32
ˆSunvisor........................................................................................... page 5-32
‰Overhead light (front)/Map lights...................................................... page 5-33
ŠOverhead console............................................................................. page 5-39
‹Sunroof switch.................................................................................. page 3-44
ŒRearview mirror................................................................................ page 3-39
Vent................................................................................................... page 5-3
ŽCup holder....................................................................................... page 5-36
Removable ashtray............................................................................ page 5-42
Shift lever......................................................................................... page 4-41
‘Selector lever.................................................................................... page 4-43
’Drive selection switch........................................................................page 4-90
“Commander switch........................................................................... page 5-17
”Electric Parking Brake (EPB) switch...................................................... page 4-70
•AUTOHOLD switch........................................................................... page 4-76
Pictorial Index
Interior Overview (Left-Hand Drive Model)
The equipment and installation position varies by vehicle1-5

Interior Equipment (View C)
▼Interior Equipment (View C)
ƒVent................................................................................................... page 5-3
„Rearview mirror................................................................................ page 3-39
…Overhead light (front)/Map lights...................................................... page 5-33
†Overhead console............................................................................. page 5-39
‡Sunroof switch.................................................................................. page 3-44
ˆSunvisor........................................................................................... page 5-32
‰Vanity mirror..................................................................................... page 5-32
ŠBottle holder.....................................................................................page 5-38
‹Seat belt........................................................................................... page 2-20
ŒHead restraint................................................................................... page 2-15
Front seat........................................................................................... page 2-4
ŽAUTOHOLD switch........................................................................... page 4-76
Electric Parking Brake (EPB) switch...................................................... page 4-70
Commander switch........................................................................... page 5-17
‘Drive selection switch........................................................................page 4-90
’Shift lever......................................................................................... page 4-41
“Selector lever.................................................................................... page 4-43
”Cup holder....................................................................................... page 5-36
Pictorial Index
Interior Overview (Right-Hand Drive Model)
The equipment and installation position varies by vehicle1-11

1. With your posture slightly slouched,
move the seatback forward to the
angle where your waist feels slightly
cramped.
1. Manual Seat
2. Power Seat

2. Move the seatback backward to a
comfortable seated posture without
any feeling of cramping in your
waist.
1. Manual Seat
2. Power Seat

Adjusting the seat position forward
and back (sliding)
Adjust the seat to the position best for
operating the accelerator and brake
pedals.
1. Place your left foot on the footrest,
your right foot between the
accelerator and brake pedals, and
position your heel to the position
allowing easy switching between
the pedals.
Essential Safety Equipment
Seats
2-7

2. With your heel set on the floor, set
your right foot on the brake pedal
and move the seat forward as far as
possible until you feel a slight
cramping in your ankle.
1. Manual Seat
2. Power Seat

3. With your right foot set on the
brake pedal, move the seat back
until you no longer feel cramping in
your ankle.
4. With your heel set on the floor,
make sure you can move your foot
between the brake pedal and
accelerator pedal smoothly.
5. Depress the accelerator pedal
completely with your heel set on
the floor and make sure that your
ankle does not feel over-stretched.
1. Manual Seat
2. Power Seat

Adjusting the seat height
Adjust the seat height to a position
where you have a clear forward view
and you can drive the vehicle easily.
Essential Safety Equipment
Seats
2-8

2. Adjust the steering wheel height so
that the gauges can be viewed
easily.
3. Raise the lever to securely lock the
steering wheel.
Adjusting the head restraint position
To prevent shock to the head and
neck, adjust the head restraints to their
correct positions.
Refer to Height Adjustment on page
2-15.
▼Driving Position Memory (Power
Seat)*
The desired driving position can be
called up after programming the
position.
The following driving positions can be
programmed.
xDriver’s seat position (seat slide,
height adjustment, front edge of seat
bottom, seat recline)
Refer to Adjusting the Driver's Seat
on page 2-4.
xActive driving display (display
position, brightness level, display
information)
Refer to Active Driving Display on
page 4-39.
xOutside mirror angle
Refer to Outside Mirrors on page
3-36.
A driving position can be programmed
to the following parts.
xPosition memory button
xTransmitter used for vehicle
NOTE
xLumbar support adjustment cannot
be programmed.
Programming
1. Make sure the parking brake is on.
2.(Automatic transmission)
Make sure the selector lever is in
the P position.
3. Switch the ignition ON.
4. Adjust the following parts to the
desired conditions.
xDriver's seatxActive driving displayxOutside mirrors
5. Press the SET button continuously
until a sound is activated.
1. 1 button
2. 2 button
3. SET button
6. Do the following operation within 5
seconds after the sound is activated
to programme the driving position.
xProgramming to a position
memory button
Press the button you want to
programme, either 1 or 2 button.
xProgramming to the transmitter
Press the unlock button on the
transmitter.
A sound is activated when the
operation is completed correctly.
Essential Safety Equipment
Seats
2-10*Some models.

NOTE
xIf you do not perform the operation
correctly, a sound indicating that the
programming has failed is activated.
xIf the angle of the outer mirrors only
changes a little, the angle of the
outer mirrors may not have been
programmed correctly.
xIf the angle of the outer mirrors is
adjusted close to the limits of its
range of motion, the driving position
can be successfully programmed, but
it may fail when calling up the
programmed driving position.
Calling up the programmed driving
position
CAUTION
Do not place fingers or hands around
the bottom of the seat while the seat
memory function is operating. The seat
moves automatically while the seat
memory function is operating and
fingers or hands could get pinched and
injured.
Using the position memory button
1. Make sure the parking brake is on.
2.(Automatic transmission)
Make sure the selector lever is in
the P position.
3. Switch the ignition ON.
4. Press the programming button for
the driving position you want to call
up (button 1 or 2).
5. A sound is activated when the
adjustment to the programmed
driving position is completed.
NOTE
xWhen adjustment of the driving
position is not necessary, a sound is
not activated.
xThe driving position adjustment is
cancelled in the following cases:
xThe seat adjustment switch on the
driver's seat is operated.
xThe angle of the outer mirrors is
adjusted.
xThe SET button is pressed.xProgramming button 1 or 2 is
pressed.
xThe lock button or unlock button
on the transmitter is pressed.
xThe vehicle starts moving.xThe active driving display is
adjusted.
x(Manual transmission)
The parking brake is released.
x(Automatic transmission)
The selector lever is shifted to a
position other than P.
Using the transmitter
1. Unlock the driver's door using one
of the following methods.
xTouch the sensing area of the
door release touch sensor.
xPress the unlock button on the
transmitter.
2. When you open the driver's door
within 90 seconds after unlocking
the doors, the adjustment of the
following parts starts.
xDriver's seatxActive driving display (When the
ignition is switched ON, the
adjusted active driving display is
activated.)
xOutside mirrors
A sound is activated when the
adjustment is completed.
NOTE
xWhen adjustment of the driving
position is not necessary, a sound is
not activated.
Essential Safety Equipment
Seats
2-11

xThe driving position adjustment is
cancelled in the following cases:
xThe seat adjustment switch on the
driver's seat is operated.
xThe angle of the outer mirrors is
adjusted.
xThe SET button is pressed.xProgramming button 1 or 2 is
pressed.
xThe lock button or unlock button
on the transmitter is pressed.
xThe vehicle starts moving.xThe active driving display is
adjusted.
x(Manual transmission)
The parking brake is released.
x(Automatic transmission)
The selector lever is shifted to a
position other than P.
Erasing programmed driving positions
Erasing the driving positions
programmed to the key
1. Switch the ignition OFF.
2. Press the SET button continuously
until a sound is activated.
3. Press the lock button on the
transmitter within 5 seconds after
the sound is activated.
NOTE
If you do not perform the operation
correctly, a sound indicating that the
programming has failed is activated.
▼Adjusting the Front Passenger's
Seat
1.Seat Slide
To move a seat forward or
backward, raise the lever and slide
the seat to the desired position and
release the lever.
Make sure the lever returns to its
original position and the seat is
locked in place by attempting to
push it forward and backward.
2.Height Adjustment
*
To adjust the seat height, move the
lever up or down.
3.Seat Recline
To change the seatback angle, lean
forward slightly while raising the
lever. Then lean back to the desired
position and release the lever.
Make sure the lever returns to its
original position and the seatback is
locked in place by attempting to
push it forward and backward.

Essential Safety Equipment
Seats
2-12*Some models.

Operation using the transmitter
When the power liftgate button on the
transmitter is pressed and held for
about 1 second or longer with all of
the following conditions met, the
hazard warning lights flash 2 times, a
beep sound is activated, and the
liftgate automatically opens/closes
fully.
xThe ignition is switched OFF.xThe vehicle is stopped.
Refer to Transmitter on page 3-5.
NOTE
xWhen opening the liftgate by
pressing the power liftgate button on
the transmitter, the liftgate can be
opened even when it is locked.
xIf the power liftgate button on the
transmitter is pressed while the
liftgate is opening/closing
electrically, the beep is activated and
the liftgate stops. When pressing the
power liftgate button again, the
liftgate moves in the reverse
direction.
Operation using switch only for
power liftgate
Operation conditions
Opening the liftgate
If the vehicle has satisfied all the
following operation conditions, the
power liftgate can be opened using the
power function.
xAll doors and the liftgate are
unlocked.
xThe vehicle is stopped.x(Manual transmission)
The ignition is switched to a position
other than ON, or when the parking
brake is applied with the shift lever in
N and the ignition switched ON.
x(Automatic transmission)
The ignition is switched to a position
other than ON, or the selector lever
is in P with the ignition switched ON.
Closing the liftgate
xThe vehicle is stopped.x(Manual transmission)
The ignition is switched to a position
other than ON, or when the parking
brake is applied with the shift lever in
N and the ignition switched ON.
x(Automatic transmission)
The ignition is switched to a position
other than ON, or the selector lever
is in P with the ignition switched ON.
NOTE
If the shift lever/selector lever is shifted
to another position and the vehicle is
moved while the liftgate is opening/
closing automatically, the liftgate
operates as follows:
xWhen the liftgate is opening
A beep sound is activated, and the
liftgate moves in the reverse
direction automatically and closes.
xWhen the liftgate is closing
A beep sound is activated, but the
liftgate continues to close.
Operation from the driver's seat (To
open/close)
Press the power liftgate switch for
about 1 second or longer while the
liftgate is in the fully closed/open
position. The hazard warning lights
Before Driving
Doors and Locks
3-24

Running-In
▼Running-In
No special running-in is necessary, but
a few precautions in the
first 1,000 km
(600 miles) may add to the
performance, economy, and life of the
vehicle.
xDo not race the engine.xDo not maintain one constant
speed, either slow or fast, for a long
period of time.
xDo not drive constantly at
full-throttle or high engine rpm for
extended periods of time.
xAvoid unnecessary hard stops.xAvoid full-throttle starts.xDo not tow a trailer.
Saving Fuel and
Protection of the
Environment
▼Saving Fuel and Protection of the
Environment
How you operate your Mazda
determines how far it will travel on a
tank of fuel. Use these suggestions to
help save fuel and reduce CO
2.
xAvoid long warm-ups. Once the
engine runs smoothly, begin driving.
xAvoid fast starts.xDrive at lower speeds.xAnticipate when to apply the brakes
(avoid sudden braking).
xFollow the maintenance schedule
and have an expert repairer (we
recommend an Authorised Mazda
Repairer) perform inspections and
servicing.
Refer to Europe on page 6-3.
Refer to Except Europe on page
6-6.
xUse the air conditioner only when
necessary.
xSlow down on rough roads.xKeep the tyres properly inflated.xDo not carry unnecessary weight.xDo not rest your foot on the brake
pedal while driving.
xKeep the wheels in correct
alignment.
xKeep windows closed at high
speeds.
xSlow down when driving in
crosswinds and headwinds.
Before Driving
Driving Tips
3-53

WARNING
Never stop the engine when going
down a hill:
Stopping the engine when going down
a hill is dangerous. This causes the loss
of power steering and power brake
control, and may cause damage to the
drivetrain. Any loss of steering or
braking control could cause an
accident.
Hazardous Driving
▼Hazardous Driving
WARNING
Be extremely careful if it is necessary
to downshift on slippery surfaces:
Downshifting into lower gear while
driving on slippery surfaces is
dangerous. The sudden change in tyre
speed could cause the tyres to skid.
This could lead to loss of vehicle
control and an accident.
When driving on ice or in water, snow,
mud, sand, or similar hazards:
xBe cautious and allow extra distance
for braking.
xAvoid sudden braking and sudden
manoeuvring.
xDo not pump the brakes. Continue
to press down on the brake pedal.
Refer to Antilock Brake System (ABS)
on page 4-80.
xIf you get stuck, select a lower gear
and accelerate slowly. Do not spin
the front wheels.
xFor more traction in starting on
slippery surfaces such as ice or
packed snow, use sand, rock salt,
chains, carpeting, or other nonslip
material under the front wheels.
NOTE
Use snow chains only on the front
wheels.
Before Driving
Driving Tips
3-54