dashboard warning lights MAZDA MODEL CX-30 2020 Owners Manual

1. The walls at the entrance andexits of tunnels, turnouts.

A BSM warning indicator light may
flash or the warning beep may be
activated several times when making
a turn at a city intersection.
Turn off the BSM while pulling a
trailer or while an accessory such as a
bicycle carrier is installed to the rear
of the vehicle. Otherwise, the radar’s
radio waves will be blocked causing
the system to not operate normally.
In the following cases, it may be
difficult to view the illumination/
flashing of the BSM warning
indicator lights equipped on the
door mirrors.
Snow or ice is adhering to the door
mirrors.
The front door glass is fogged or
covered in snow, frost or dirt.
The rear side radar sensor of the BSM
may be regulated under the radio
wave related laws of the country
where the vehicle is driven. If this
system is used abroad, it may be
necessary to turn off the system.
Refer to Rear Side Radar Sensor on
page 4-197.
The system switches to the Rear
Cross Traffic Alert (RCTA) function
when the shift lever (manual
transmission) or the selector lever
(automatic transmission) is shifted to
the reverse (R) position.
Refer to Rear Cross Tra ffi c Alert
(RCTA) on page 4-111.
▼ Blind Spot Monitoring (BSM)
Warning Indicator Lights/Display
Indicator/Blind Spot Monitoring
(BSM) Warning Beep
The BSM system notifies the driver of
the presence of vehicles in adjacent
lanes or at the rear of the vehicle using
the BSM warning indicator light, the
warning sound and the display
indicator while the systems are
operational.
BSM warning indicator lights
The BSM warning indicator lights are
equipped on the left and right door
mirrors. The warning indicator lights
turn on when a vehicle approaching
from the rear in an adjacent lane is
detected.
When the ignition is switched ON, the
warning indicator light turns on
momentarily and then turns off after a
few seconds.
Function for canceling illumination
dimmer
If the BSM warning indicator lights turn
on when the parking lights are turned
on, the brightness of the BSM warning
indicator lights is dimmed.
If the BSM warning indicator lights are
difficult
to see due to glare from
surrounding brightness when traveling
on snow-covered roads or under foggy
conditions, press the dimmer
cancellation button to cancel the
dimmer and increase the brightness of
BSM warning indicator lights when
they turn on.
Refer to Dashboard Illumination on
page 4-17.
Display indicator
The detected approaching vehicle and
warning are displayed in the
When Driving
i-ACTIVSENSE
4-95
CX-30_8HG6-EA-19I_Edition1_new 2019-6-13 18:45:11

WARNING
Always check the surrounding area
visually before actually putting the
vehicle in reverse:
The system is only designed to assist
you in checking for vehicles at the rear
when putting the vehicle in reverse.
Due to certain limitations with the
operation of this system, the Blind Spot
Monitoring (BSM) warning indicator
lights may not flash or it might be
delayed even though a vehicle is
behind your vehicle. Always make it
your responsibility as a driver to check
the rear.
RCTA operation
1. The RCTA system operates when the shift lever (manual
transmission) or the selector lever
(automatic transmission) is shifted
to the reverse (R) position.
2. If there is the possibility of a collision with an approaching
vehicle, the Blind Spot Monitoring
(BSM) warning indicator lights
flashes and the warning beep is
activated simultaneously.
Rear view monitor (vehicles with
Rear view monitor)
The RCTA warning indication in the
rearview monitor also synchronizes
with the Blind Spot Monitoring
(BSM) warning indicator light on
the door mirrors.
360°view monitor (vehicles with
360°view monitor)
The RCTA warning indication in the
360°view monitor also
synchronizes with the Blind Spot
Monitoring (BSM) warning
indicator light on the door mirrors.
Function for canceling illumination
dimmer
If the BSM warning indicator lights turn
on when the parking lights are turned
on, the brightness of the BSM warning
indicator lights is dimmed.
If the BSM warning indicator lights are
difficult to see due to glare from
surrounding brightness when traveling
on snow-covered roads or under foggy
conditions, press the dimmer
cancellation button to cancel the
dimmer and increase the brightness of
BSM warning indicator lights when
they turn on.
Refer to Dashboard Illumination on
page 4-17.
NOTE
The system may operate under the
following conditions even if a vehicle
is not approaching.
An object that reflects the radio
waves of the radar such as a
parked vehicle, guardrail, or wall is
directly next to your vehicle.
A vehicle approaching from the
rear left and right side of your
vehicle slows down.
A vehicle approaching from the
rear left and right side of your
vehicle makes a right or left turn
directly in front of your vehicle.
When Driving
i-ACTIVSENSE
4-112
CX-30_8HG6-EA-19I_Edition1_new 2019-6-13 18:45:11

Index
Flat TireChanging a flat tire................. 7-5
Mounting the spare tire.......... 7-9
Removing a flat tire................ 7-6
Floor Mat................................. 3-49
Fluids Brake/Clutch........................6-18
Classification .......................... 9-4
Washer................................ 6-19
Foot Brake................................ 4-60
Forward Sensing Camera (FSC) ..........
.............................................. 4-190
Front Camera/Side Cameras/Rear
Camera.................................. 4-199
Front Cross Traffic Alert (FCTA) ..........
.............................................. 4-108
Front Cross Tra ffi c Alert (FCTA)
Warning Beep........................... 7-39
Front Radar Sensor.................. 4-194
Front Side Radar Sensor........... 4-196
Fuel Filler lid and cap...................3-30
Requirements....................... 3-28
Tank capacity......................... 9-5
Fuses........................................ 6-32 Panel description.................. 6-35
Replacement........................ 6-32
G
Gauges..................................... 4-11
Glove Compartment..................5-41
H
Hazardous Driving.....................3-48
Hazard Warning Flasher............. 4-55
HeadlightsComing home light...............4-45
Flashing................................4-45
High-low beam.................... 4-45
Leaving home light............... 4-45
Leveling................................4-46
Head Restraint.......................... 2-15
High Beam Control System
(HBC)....................................... 4-87 High Beam Control System (HBC)
indicator light (green)........... 4-88
Hill Launch Assist (HLA)............. 4-69
HomeLink Wireless Control
System...................................... 4-55
Hood Release........................... 6-12
Horn........................................ 4-54
I
If a Warning Light Turns On or
Flashes......................................7-22
If the Active Driving Display Does Not
Operate.................................... 7-42
Ignition Not Switched Off (STOP)
Warning Beep........................... 7-37
Ignition Switch............................ 4-4
Illuminated Entry System............ 5-36
Immobilizer System................... 3-43
Inspecting Brake/Clutch Fluid
Level.........................................6-18
Inspecting Coolan t Level............ 6-17
Inspecting Engine Oil Level.........6-16
Inspecting Washer Fluid Level..... 6-19
Instrument Cluster..................... 4-11 Average fuel economy...........4-18
Compass display.................. 4-20
Current fuel economy........... 4-19
Dashboard illumination........ 4-17
Distance-to-empty................4-18
Engine coolant temperature
gauge...................................4-15
Fuel gauge........................... 4-16
Indication/indicator lights..... 4-23
i-ACTIVSENSE display........... 4-19
Message indicated on multi-
information display............... 7-33
10-4
CX-30_8HG6-EA-19I_Edition1_new 2019-6-13 18:45:11