warning light MAZDA MODEL CX-5 2013 Quick Guide (in English)

7
When Driving
For details, refer to Section 4, “Start/Stop Engine”.
i-stop OFF Switch
The i-stop function can be turned off by
pressing the switch until the beep sounds and
the i-stop warning light (amber) in the
instrument cluster illuminates.
The i-stop function can be turned back on by
pressing the switch again until the beep sounds
and the i-stop warning light (amber) turns off.
Operation of i-stop Function
(Automatic transaxle)
1.(Except European model)
The i-stop indicator light (green) illuminates when the i-stop conditions are met
while the vehicle is being driven.
2. The i-stop function operates when the brake pedal is depressed while driving
the vehicle (except for driving in reverse) and the vehicle is stopped. The
i-stop indicator light (green) also illuminates while the i-stop function is
operating.
3. When the brake pedal is released while the shift lever is in the D/M position (not
second gear fixed mode), the engine restarts automatically and the i-stop
indicator light (green) turns off. The i-stop indicator light (green) illuminates if
the i-stop function conditions are met again while driving (except European
model)
With the selector lever in the N or P position, the engine will not restart even if
the brake pedal is released. If the brake pedal is depressed again, the engine
will restart.
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD

8
When Driving
For details, refer to Section 4, “Instrument Cluster and Display”.
Warning/Indicator Lights
Signal Warning/Indicator Lights
1
2
3
4
5
6
7
8
9
10Brake System Warning Light Master Warning Light
ABS Warning Light
Charging System Warning Indication
Engine Oil Warning Indication
Check Engine Light
High Engine Coolant Temperature
Warning Light (Red)
i-stop Warning Light
(Amber)/Indicator Light (Green)
Rear Vehicle Monitoring (RVM)
System Warning Light
(Amber)/Indicator Light (Green)
11
12
13
14
15Lane Departure Warning System
(LDWS) Warning Light
(Amber)/Indicator Light (Green)
4WD Warning Indication
Automatic Transaxle Warning
Indication
Power Steering Malfunction
Indication
16Air Bag/Front Seat Belt Pretensioner
System Warning Light
Low Fuel Warning Light
17Seat Belt Warning Light
18
2022
23
24
30
31
32
33
Door-Ajar Warning IndicationTyre Pressure Monitoring System
Warning Light
KEY Indication
High Beam Control System (HBC)
Warning Light (Amber)/Indicator
Light (Green)
TCS/DSC Indicator Light
TCS OFF Indicator Light
AFS OFF Indicator Light
Low Engine Coolant Temperature
Indicator Light (Blue)
34
35
36
37
38Shift Position Indication
Headlight High-Beam Indicator
Light
Direction Indicator/Hazard Warning
Indicator Lights
Security Indicator Light
39Cruise Main Indicator Light
(Amber)/Cruise Set Indicator Light
(Green)
Lights-On Indicator Light
40Front Fog Light Indicator Light
Rear Fog Light Indicator Light Signal Warning/Indicator Lights
Some of the warning/indicator lights are displayed in the instrument cluster.
If a warning/indicator light is displayed in the instrument cluster, verify the
meaning of the warning in the Warning (Display Indication) item.
19Liftgate-Ajar Warning IndicationGlow Indicator Light
Diesel Particulate Filter Indication
Wrench Indication 25
26
27
Vehicle Speed Warning Indication28
29Sedimentor Warning Indication
Low Ambient Temperature Warning
Indication 21
Low Washer Fluid Level Warning
Indication
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD

When Driving
10
i-ACTIVSENSE
Your vehicle is equipped with a variety of safety and driver support systems called
i-ACTIVSENSE
For details, refer to Section 4, “Switches and Controls”.
In addition, a Forward Sensing Camera (FSC) and Laser sensors are installed to
operate the systems.
Your vehicle is equipped with a Forward Sensing Camera (FSC). The Forward
Sensing Camera (FSC) is positioned near the rearview mirror and used by the
following systems. Safety and Driver Support Systems
• Smart City Brake Support (SCBS)
• Rear Vehicle Monitoring (RVM) System
• Lane Departure Warning System (LDWS)
• High Beam Control System (HBC)
Forward Sensing Camera
• High Beam Control System (HBC)
• Lane Departure Warning System (LDWS)
Always keep the windscreen glass around the camera clean by removing dirt or
fogging. Use the windscreen defroster to remove fogging on the windscreen.
• Adaptive Front Lighting System (AFS)
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD

When Driving
12
X Mark Full Low
For details, refer to Section 4, “Switches and Controls”, “ABS/TCS/DSC” or “Tyre Pressure
Monitoring System”.
Tyre Pressure Monitoring System
The Tyre Pressure Monitoring System (TPMS) monitors the air pressure of all
four tyres. If the air pressure of one or more tyres is too low, the system warns the
driver by indicating the tyre pressure monitoring system warning light in the
instrument cluster and operating a beep sound.
In the following cases, system initialization must be performed so that the system
operates normally.
• A tyre pressure is adjusted.
• Tyre rotation is performed.
• A tyre or wheel is replaced.
• The battery is replaced or completely drained.
• The tyre pressure monitoring system warning
light is illuminated.
Diesel Particulate Filter
The diesel particulate filter collects and removes most of the particulate matter
(PM) in the exhaust gas of a diesel engine.
Inspect the engine oil level periodically. When inspecting the engine oil, if the
engine oil level is close to or exceeds the “X” mark on the dipstick, replace the
engine oil.
Whenever the engine oil is replaced, the vehicles engine control unit needs to be
reset according to the instruction in Workshop Manual as soon as possible.
Otherwise the engine oil warning light may illuminate. Consult an expert repairer
to reset the engine control unit, we recommend an Authorised Mazda Repairer.
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD

If Trouble Arises
15
If Trouble Arises
• Flat Tyre
If you have a flat tyre, drive slowly to a level spot that is well off the road and
out of the way of traffic to change the tyre.
In the event of a flat tyre, use the emergency flat tyre repair kit to repair the tyre
temporarily or use the temporary spare tyre.
• Overheating
1. Drive safely to the side of the road and park off the right-of-way.
2. Check whether coolant or steam is escaping from the engine compartment.
If steam is coming from the engine compartment:
Do not go near the front of the vehicle. Stop the engine.
Wait until the steam dissipates, then open the bonnet and start the engine.
If neither coolant nor steam is escaping:
Open the bonnet and idle the engine until it cools.
• Towing Description
We recommend that towing be done only by an expert repairer, we recommend
an Authorised Mazda Repairer or a commercial tow-truck service.
• Warning Lights and Warning Sounds
If a warning light illuminates or flashes or a warning sound is heard, check for
details concerning the warning light or sound in this guide. If the problem
cannot be resolved, contact an Authorised Mazda Repairer.
For details, refer to Section 7, “Flat Tyre”, “Overheating”, “Emergency Towing” or
“Warning/Indicator Lights and Warning Sounds”.
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD