display MAZDA MODEL CX-5 2016 Navigation Manual (in English)

20
2.4.4 Manipulating the map
By touching and dragging any part of the map screen, it can be moved to \
a location
close to the currently displayed map.
In addition, the map operation button is displayed, and by touching each\
of the
buttons, you can zoom in and out of maps, change the map perspective and\
select a
destination.
Action Button(s)
Description
Map movement
using touch and
drag No buttons You can move the map in any direction: select
and hold the map, and move your fi nger
towards the direction you want to move the
map.
Zooming in and
out
, Changes how much of the map is displayed on
the screen.
The navigation system uses high-quality
vector maps that let you examine the map at
various zoom levels, always with optimized
content.
Map scaling has a limit in 3D map view mode.
If you zoom out further, the map switches to
2D view mode.
Select the button once to modify the view in
large steps, or select and hold the button to
modify it continuously and smoothly.
/"7$76&&JOEC


 /"7$76&&JOEC












21
1
2
3
4
5
6
Action Button(s)Description
Tilting up and
down
, Changes the vertical view angle of the map in
3D mode.
Select the button once to modify the view in
large steps, or select and hold the button to
modify it continuously and smoothly.
Rotating left
and right
, Changes the horizontal view angle of the map.
Select the button once to modify the view in
large steps, or select and hold the button to
modify it continuously and smoothly.
Compass
The direction of the compass shows North.
Select the button to switch to North-up view,
and then select again to rotate the map in the
previous direction.
Open/close
, The UMP (menu bar) is displayed on the
lower part of the screen.
Hides the displayed UMP if the UMP has been
displayed.
Select
destination
Select this button to select the Cursor as a
new destination. The route is automatically
calculated.
Return to
normal
navigation
Select this button to move the map back to
follow the current GPS position. Automatic
map rotation is also re-enabled.
The map manipulation buttons disappear and
navigation continues.
/"7$76&&JOEC


 /"7$76&&JOEC












22
Action Button(s)Description
2D or 3D view
, ,
When this button is selected, the map view
mode can be changed.
•
: The map is displayed so that north is up
regardless of the direction of travel.
•
: The map is rotated so that the direction
of travel is displayed in the upward
direction.
•
: Displays things such as actual
construction sites three dimensionally on the
map.
Zoom-in/zoom-
out mode
You can zoom-in/zoom-out of maps.
Rotate mode
Rotates maps.
Perspective
angle mode
You can change the angle of perspective on a
map.
/"7$76&&JOEC


 /"7$76&&JOEC












25
1
2
3
4
5
6
3.1.1 Entering an address or a part of the address
If you know at least a part of the address, it is the quickest way to se\
lect the
destination of the route.
Using the same screen, you can fi nd an address by entering:
• Destination address
• The center of a city
• An intersection
• The midpoint of a street
If an address or part of a facility name is input, a search candidate li\
st including
the input characters is displayed. The greater the number of characters input the
more the list is re fi ned.
3.1.1.1 Entering an address
To enter an address as the destination, do as follows: 1. Select
after selecting on the MAP screen.
2. Select
.
3. By default, the navigation system proposes the country and city where yo\
u are. If needed, select
, enter the fi rst few letters of the country name
on the keyboard, and select one country from the list of results.
/"7$76&&JOEC


 /"7$76&&JOEC


 








28
6. Enter the house number:
a. Select
.
b. Enter the house number on the keyboard. (To enter letters, select
.)
c. Select
to fi nish entering the address. (If the entered house number
cannot be found, the midpoint of the street is selected as the destinati\
on.)
7. The selected location is shown on the map. The system transitions to the next screen by selecting
, or it
returns to the previous screen by selecting the
button. By touching the
location displayed on the screen, you can change the destination to anyw\
here
on the map.
• : You can search for POI (point of interest) around
the selected location.
•
: The selected location can be registered to Favorites.
/"7$76&&JOEC


 /"7$76&&JOEC


 








29
1
2
3
4
5
6
8. Navigation starts if is selected, or after 10 seconds of no user
interaction.
By touching the location displayed on the screen, you can verify the rou\
te.
Additionally, the route can be revised by selecting other options.
/"7$76&&JOEC


 /"7$76&&JOEC


 








31
1
2
3
4
5
6
5. Instead of entering the house number, select . The midpoint
of the street is selected as the destination.
6. The selected location is shown on the map. The system transitions to the next screen by selecting
, or it
returns to the previous screen by selecting the
button. By touching the
location displayed on the screen, you can change the destination to anyw\
here
on the map.
• : You can search for POI (point of interest) around
the selected location.
•
: The selected location can be registered to Favorites.
/"7$76&&JOEC


 /"7$76&&JOEC


 








32
7. Navigation starts if
is selected, or after 10 seconds of no user
interaction.
By touching the location displayed on the screen, you can verify the rou\
te.
Additionally, the route can be revised by selecting other options.
/"7$76&&JOEC


 /"7$76&&JOEC


 








35
1
2
3
4
5
6
6. The selected location is shown on the map.The system transitions to the next screen by selecting
, or it
returns to the previous screen by selecting the
button. By touching the
location displayed on the screen, you can change the destination to anyw\
here
on the map.
• : You can search for POI (point of interest) around
the selected location.
•
: The selected location can be registered to Favorites.
7. Navigation starts if
is selected, or after 10 seconds of no user
interaction.
By touching the location displayed on the screen, you can verify the rou\
te.
Additionally, the route can be revised by selecting other options.
/"7$76&&JOEC


 /"7$76&&JOEC


 








37
1
2
3
4
5
6
5. Instead of entering the street name, select . This way the
center of the displayed city becomes the destination of the route.
6. The selected location is shown on the map. The system transitions to the next screen by selecting
, or it
returns to the previous screen by selecting the
button. By touching the
location displayed on the screen, you can change the destination to anyw\
here
on the map.
• : You can search for POI (point of interest) around
the selected location.
•
: The selected location can be registered to Favorites.
/"7$76&&JOEC


 /"7$76&&JOEC