lights MAZDA MODEL CX-5 2017 - RHD (UK, Australia) (in English) Owner's Guide

▼Fuel Gauge (Without
Multi-information Display)
The fuel gauge shows approximately how
much fuel is remaining in the tank when
the ignition is
switched ON. We
recommend keeping the tank over 1/4 full.

Full
1/4 Full
Empty
If the low fuel warnin g light illuminates or
the fuel level is very low, refuel as soon as
possible.
Refer to Taking Action on page 7-53 .
NOTE
•After refuelling, it may require some
time for the indicator to stabilize. In
addition, the indicator may deviate
while driving on a slope or curve since
the fuel moves in the tank.
•The display indicating a quarter or less
remaining fuel has more segments to
show the remaining fuel level in greater
detail.
•The direction of the arrow () indicates
that the fuel-filler flap is on the left side
of the vehicle.
(SKYACTIV-D 2.2)
If inconsistency in e ngine performance or
stalling occurs due to low fuel level
conditions, refuel the vehicle as soon as
possible and add at least 10 L (2.7 US gal,
2.2 Imp gal) of fuel.
▼ Instrument Panel Illumination
(Without auto-light control)
When the position lights are turned on
with the ignition switched ON, the
brightness of the instrument panel
illumination is dimmed.
(With auto-light control)
When the position lights are turned on
with the ignition switched ON, the
brightness of the instrument panel
illumination is dimmed. However, when
the light sensor detects that the
surrounding area is bright such as when
the position lights are turned on in the
daytime, the instrument panel illumination
does not dim.
NOTE
•(With auto-light control)
When the ignition is switched ON in the
early evening or at dusk, the instrument
panel illumination is dimmed for several
seconds until the light sensor detects the
brightness of the surrounding area,
however, the dimmer may cancel after
the brightness is detected.
•When the position lights are turned on,
the position lights i
ndicator light in the
instrument cluster turns on.
Refer to Headlights on page 4-63.
When Driving
Instrument Cluster and Display
4-26
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

The brightness of the instrument cluster
and instrument panel illuminations can be
adjusted by rotating the knob.
•The brightness decreases by rotating the
knob to the left. A beep sound will be
heard when the knob has been rotated to
the maximum dim position.
•The brightness increases by rotating the
knob to the right.
DimBright
Function for cancelling illumination
dimmer
The illumination dimmer can be cancelled
by rotating the instrument panel
illumination knob to the right until a beep
sound is heard while th e instrument cluster
is dimmed with the ignition switched ON.
If the instrument cluster's visibility is
reduced due to glare from surrounding
brightness, cancel the illumination
dimmer.
NOTE
•(With Multi-information Display)
The illumination dimmer can be
cancelled by pressing the instrument
panel illumination knob.
•When the illumination dimmer is
cancelled, the instrument cluster cannot
be dimmed even if the position lights are
turned on.
•When the illumination dimmer is
cancelled, the screen in the centre
display switches to constant display of
the daytime screen.
▼ Outside Tempera
ture Display
(Without Multi-information
Display)
When the ignition is switched ON, the
outside temperature is displayed.

NOTE
•Under the following conditions, the
outside temperature display may differ
from the actual outside temperature
depending on the surroundings and
vehicle conditions:
•Significantly cold or hot temperatures.
•Sudden changes in outside
temperature.
•The vehicle is parked.
•The vehicle is driven at low speeds.
Changing the Temperature Unit of the
Outside Temperature Display (Vehicles
with Type B audio)
The outside temperature unit can be
switched between Celsius and Fahrenheit.
Settings can be changed by operating the
centre display screen.
Refer to Personalisa tion Features on page
9-12.
When Driving
Instrument Cluster and Display
4-27
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Warning/Indicator Lights
Instrument Cluster varies depending on model and specifications.
Centre of Instrument panel
Warning/Indicator lights will appear in any of the highlighted areas
Type A
(With Multi-information Display)
(Without Multi-information Display)
Instrument Cluster
Type B
▼ Warning Indication/Warning Lights
These lights turn on or flash to notify the user of the system
operation status or a system
malfunction.
Signal Warning Page
Brake System Warning Light*17-43
When Driving
Instrument Cluster and Display
4-42
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SignalWarning Page
(Red)
*KEY Warning Light*1
Turns on
7-46
Flashing 7-53
(Amber)
*i-stop Warning Light*17-46
(Amber)*i-ELOOP Warning Indication 7-46
(Amber)
*High Beam Control System (HBC) W
arning Indication/Warning Light*17-46
*Adaptive LED Headlights (ALH) Warning Indication/Warning Light*17-46
*Blind Spot Monitoring (BSM) Warning Indication 7-46
(Amber)
*Driver Attention Alert (D
AA) Warning Indication 7-46
(Amber)
*Mazda Radar Cruise Control (MRCC) Warning
Indication7-46
*Mazda Radar Cruise Control with Stop & Go func
tion (MRCC with Stop
& Go function) Warning Indication 7-46
(Amber)
*Lane-keep Assist System (LAS) &
Lane Departure Warning System
(LDWS) Warning Indication 7-46
LED Headlight Warning Light*17-46
(Amber)
*Smart Brake Support/Sma
rt City Brake Support (SBS/SCBS) Warning In-
dication/Warning Light*17-53
Low Fuel Warning Indication/Warning Light 7-53
*120 km/h Warning Light*17-53
Seat Belt Warning Light (Front seat) 7-53
(Red)*Seat Belt Warning Light (Rear seat)7-53
*Low Washer Fluid Level Warning Indication/Warning Light
7-53
When Driving
Instrument Cluster and Display
4-44*Some models.
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SignalWarning Page
*Door-Ajar Warning Indication 7-53
*Liftgate-Ajar Warning Indication7-53
*Door-Ajar Warning Light
7-53
*1 The light turns on when the i
gnition is switched on for an operation check, and turns off a few seconds later or
when the engine is started. If t he light does not turn on or remains turned on, have the vehicle inspected at an
expert repairer, we recommend an Authorised Mazda Repairer.
▼ Indication/Indicator Lights
These lights turn on or flash to
notify the user of the system operation status or a system
malfunction.
Signal Indicator Page
(Green)*Seat Belt Indicator Light (Rear seat) 2-21
*Front Passenger Air Bag Deactivation Indicator Light*12-58
(Green)
*KEY Indicator Light
4-5
(Green)
*i-stop Indicator Light4-19
(White)*i-ELOOP Indication4-94
Security Indicator Light*13-48
When Driving
Instrument Cluster and Display
*Some models.4-45
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SignalIndicator Page
(White/Amber)
*Vehicle Speed Alarm Indication Without mul-
ti-information display
4-30
With multi-in- formation dis- play
4-38
Wrench Indication/Indicator Light*14-50
*Glow Indicator Light*14-50
*Diesel Particulate Filter Indication/Indicator Light*14-216
(Blue)
*Low Engine Coolant Temperature Indicator Light 4-50
Shift Position Indication
4-57
Lights-On Indication/Indicator Light 4-63
Headlight High-Beam Indicator LightHeadlight
High-Low Beam 4-66
Flashing the Headlights 4-66
*Front Fog Light Indicator Light 4-68
*Rear Fog Light Indicator Light4-69
Direction Indicator/Hazard Warning Indicator LightsTurn and
Lane-Change Signals4-70
Hazard Warning Flasher4-78
Electric Parking Brake (EPB ) Indication/Indicator Light*1*27-46
When Driving
Instrument Cluster and Display
4-46*Some models.
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SignalIndicator Page
(Green)
*Brake Pedal Operation demand Indicator Light 4-81
AUTOHOLD Active Indicator Light*14-86
*Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop
& Go function) indicator Light 4-159
TCS/DSC Indicator Light*1
Traction Control
System (TCS) 4-91
Dynamic Stabil- ity Control(DSC)4-93
Turns on 7-46
TCS OFF Indicator Light*14-92
*Select Mode Indication 4-101
(Green)
*High Beam Control System (HBC) Indicator Light 4-110
*Adaptive LED Headlights (ALH) Indicator Light4-114
*Blind Spot Monitoring (BSM) OFF Indicator Light*1
Except malfunc-
tion
4-119
Malfunction 7-46
(White)
*Mazda Radar Cruise Contr ol (MRCC) Main Indication 4-140
*Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop
& Go function) Main Indication 4-153
(Green)
*Mazda Radar Cruise Control (MRCC) Set Indication
4-140
*Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop
& Go function) Set Indication 4-153
(White/Green)
*Lane-keep Assist System (LAS) & Lane Departure Warning System
(LDWS) Indication 4-166
*Lane-keep Assist System (LAS) & Lane Departure Warning System
(LDWS) OFF Indicator Light*14-171
When Driving
Instrument Cluster and Display
*Some models.4-47
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Transaxle Ranges
•The shift position indication in the
instrument cluster illuminates. Refer to
Warning/Indicator Lights on page 4-42.
•The selector lever must be in P or N to
operate the starter.
P (Park)
P locks the transaxle and prevents the
front wheels from rotating.
WA R N I N G
Always set the selector lever to P and set
the parking brake:
Only setting the selector lever to the P
position without using the parking brake to
hold the vehicle is dangerous. If P fails to
hold, the vehicle could move and cause an
accident.
CAUTION
 Shifting into P, N or R while the vehicle is
moving can damage your transaxle.
 Shifting into a driving gear or reverse
when the engine is running faster than
idle can damage the transaxle.
R (Reverse)
In position R, the vehicle moves only
backward. You must be at a complete stop
before shifting to or from R, except under
rare circumstances as explained in
Rocking the Vehicle (page 3-56).
NOTE
(With parking sensor system)
When the selector lever is shifted to the R
position with the igni tion switched ON, the
parking sensor system is activated and a
beep sound is heard.
Refer to Parking Sensor System on page
4-229.
N (Neutral)
In N, the wheels an d transaxle are not
locked. The vehicle will roll freely even
on the slightest inclin e unless the parking
brake or brakes are on.
WA R N I N G
If the engine is running faster than idle, do
not shift from N or P into a driving gear:
It's dangerous to shift from N or P into a
driving gear when the engine is running
faster than idle. If this is done, the vehicle
could move suddenly, causing an accident
or serious injury.
Do not shift into N when driving the
vehicle:
Shifting into N while driving is dangerous.
Engine braking cannot be applied when
decelerating which could lead to an
accident or se rious injury.
CAUTION
Do not shift into N when driving the
vehicle. Doing so can cause transaxle
damage.
When Driving
Automatic Transaxle
4-56
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Lighting Control
▼Headlights
Turn the headlight switch to turn
the headlights and other exterior lights on or off.
When the lights are turned on, the lights-on indicator light in the instrument cluster turns on.

NOTE
•To prevent discharging the battery, do not leave the lights on while the engine is off unless
safety requires them.
•Headlights do not blind drivers approaching in the opposite direction no matter what side
of the road you must drive your vehicle (left- hand or right-hand traffic). Therefore, it is
not necessary to adjust the optical axis of the headlights when switching temporarily to
driving on the opposite side of the road (left-hand or right-hand traffic).
Without auto-light control

Switch Position
Ignition Position ONACC or
OFF ONACC or
OFF ONACC or
OFF
Headlights Off Off Off Off On Off
Running lights
*On*1Off Off Off Off Off
Tail lights
Position lights
Number plate lights Off/On
*2Off On On On
On*3
*1 The lights are turned on while the vehicle is driven.*2 When the running lights are turned on, the tail lights, and nu mber plate lights turn on. The position lights does
not turn on. (Taiwan)
When Driving
Switches and Controls
*Some models.4-63
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

*3 The lights are turned on continuously if the ignition is switched from ON to any other position with the lights
turned on. The lights are turned off when the driver's door is opened or 30 seconds have elapsed since the
lights turned on.
With auto-light control

Switch Position
Ignition Position ONACC or
OFF ON
ACC or
OFF ON
ACC or
OFF ON
ACC or
OFF
Headlights Off Off
Auto
*3Off Off Off On Off
Running lights
*On*1Off On*4Off Off Off Off Off
Tail lights
Position lights
Number plate lights On
*2Off
Auto*3On*5On On On On*5
*1 The lights are turned on wh ile the vehicle is driven.*2 When the running lights are turned on, the tail lights, and number plate lights turn on. The position lights does
not turn on. (Taiwan)
*3 The lights are turned on by the auto light function.*4 The lights are turned on while t he vehicle is driven, and turned off when the headlights are turned on by the
auto light function.
*5 The lights are turned on continuously if the ignition is switc hed from ON to any other position with the lights
turned on. The lights are turned off when the driver's door is opened or 30 seconds have elapsed since the
lights turned on.
Auto-light control*
When the headlight switch is in the position and the ignition is switched ON, the light
sensor senses the surrounding lightness or darkness and automat ically turns the headlights
and other exterior lights on or off.
When Driving
Switches and Controls
4-64*Some models.
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2