brake sensor MAZDA MODEL CX-5 2017 Smart Start Guide (in English)

25 MAZDAUSA.COM
MAZDA RADAR CRUISE CONTROL (MRCC)
WITH STOP & GO FUNCTION
The MRCC with Stop & Go function maintains vehicle speed and
following distance using a radar sensor to detect a vehicle ahead.
The driver simply presets the vehicle speed between 0 mph and 90 mph and the system will maintain a safe following distance
without having to turn the cruise control off or use the accelerator
or brake pedals. If the vehicle ahead stops while you are following behind it, your vehicle will stop automatically.
The system operates in two modes: CONSTANT SPEED MODE: When no
vehicle is detected ahead, the driver’s set
speed is maintained.
HEADWAY CONTROL MODE: When a vehicle is detected ahead, a distance between your
vehicle and the vehicle ahead is maintained.
Setting the MRCC with Stop & Go function: When the Mode switch is pushed, the vehicle speed and the distance between vehicles while in headway control can be set. The MRCC
with Stop & Go function indication is shown in the multi-information
display. The indicator light in the multi-information display will be
green and will turn on simultaneously.
NOTE: The radar for the MRCC with Stop & Go function is located behind the Mazda
emblem in the grille. Keep this area clean to ensure the system works properly.
How to set the speed:
1 Adjust the vehicle to the desired speed using the accelerator pedal.
2 Push the SET + or SET – switch. The set speed and the inter-vehicle distance display filled
with white lines are displayed in the multi-information display
and the MRCC indicator light
(green) turns on simultaneously.
3
Push the center of the RESUME switch to resume set speed.
Vehicle ahead
MRCC Distance
between vehicle
MRCC Set
vehicle speed
MAZDA RADAR CRUISE CONTROL
WITH STOP & GO FUNCTION (IF EQUIPPED)
MODE DISPLAY
Constant Speed
Headway Control
WARNING:
Switch the MRCC
system off when it is not in use.
DO NOT get out
of the vehicle while the stop hold control
is operating.
WARNING:
Do not rely
completely on the MRCC with Stop
& Go function and always drive
carefully obeying the speed limit.
2364256 17a CX-5 SSG 030117.indd 253/1/17 5:51 PM

27 MAZDAUSA.COM
WARNING:
SCBS is only a
supplementary
system to reduce
damage in the event of a
collision; however, the SCBS has limitations. Do
not rely solely on the SCBS. Always keep your eyes
on the road.
SMART CITY BRAKE SUPPORT
(IF EQUIPPED)
SMART CITY BRAKE SUPPORT (SCBS) SYSTEM
Between speeds of 2 mph to 18 mph, the Smart City Brake Support
attempts to minimize damage if a collision is unavoidable. In some instances, SCBS may be able to stop the vehicle automatically to
avoid a collision with the vehicle ahead.
Partial list of operating conditions: • During vehicle speeds of 2 mph to 18 mph.
•
SCBS system has not been turned off.
NOTE: It may be possible to avoid a collision if the relative speed
between your vehicle and the vehicle ahead is less than 12 mph.
Refer to your Owner’s Manual for a complete list of SCBS operating
conditions and system details.
SAFETY SETTINGS
SCBS can be turned off using Safety Settings in MAZDA CONNECT (p. 15).
Camera sensor
2364256 17a CX-5 SSG 030117.indd 273/1/17 5:51 PM

m{zd{ cx-5 28
SMART BRAKE SUPPORT (SBS)
At speeds of 10 mph or higher, the Smart Brake Support (SBS) alerts the driver of a possible collision and attempts to reduce the severity of an imminent collision with the vehicle ahead. SBS
operates when the vehicle is traveling at speeds higher than the range of the SMART CITY BRAKE SUPPORT (SCBS).
Partial list of operating conditions: •
During vehicle speeds of 10 mph or higher.
•
The Smart Brake Support (SBS) system has not been turned off.
SBS system can be turned off using Safety Settings in
MAZDA CONNECT (p. 15).
Refer to your Owner’s Manual for a complete list of SBS operating
conditions and system details.
COLLISION WARNINGIf there is the possibility of a collision with a vehicle
ahead, the beep sounds continuously and a warning is indicated in the multi-information display.

Camera sensor
Radar sensor
WARNING:
SBS is only a
supplementary
system to reduce
damage in the event of a
collision; however, the SBS has limitations. Do
not rely solely on the SBS. Always keep your eyes
on the road.
SMART BRAKE SUPPORT
(IF EQUIPPED)
2364256 17a CX-5 SSG 030117.indd 283/1/17 5:51 PM