brakes MAZDA MODEL CX-5 2017 Smart Start Guide (in English)

m{zd{ cx-5 26
How to set the distance between vehicles:
The distance between vehicles is increased by pushing the
switch and decreased by pushing the switch. The
distance between vehicles can be set to four levels.
Switching to conventional cruise control function: When the Mode switch is pushed while the MRCC with Stop
& Go function system is turned on, the system is switched to conventional cruise control function.
The MRCC with Stop & Go function indicator light (green) in the instrument cluster turns off and “Radar Cruise Control
deactivated” message is displayed in the multi-information
display at the same time.
CLOSE PROXIMITY WARNING While traveling in headway control, if your
vehicle rapidly closes in on a vehicle ahead because the other driver applied his or her
brakes suddenly, a warning sound activates and the BRAKE! warning is indicated in the
display. Always verify the safety of the surrounding area and depress the brake pedal while keeping a safe distance from the vehicle ahead. Additionally, always keep a safe distance
from the vehicles behind you.
NOTE: The MRCC with Stop & Go function sometimes will brake your vehicle when
encountering a semi truck (tractor trailer). This is normal. Simply push the accelerator pedal to override the system.
MAZDA RADAR CRUISE CONTROL
WITH STOP & GO FUNCTION (IF EQUIPPED)
CANCEL/OFF
Distance Control
(Longer /
Shorter )
MODE (ON)
Cruise
Control (SET+ /
RESUME/
SET –)
MRCC with Stop & Go
function Set Switch
DISTANCES BETWEEN
VEHICLES
(at 50 mph) DISPLAY
Long
(about 164 ft)
Medium (about 131 ft)
Short
(about 98 ft)
Extremely Short
(about 82 ft)
2364256 17a CX-5 SSG 030117.indd 263/1/17 5:51 PM

51 MAZDAUSA.COM
ELECTRIC PARKING BRAKE / AUTOHOLD
ELECTRIC PARKING BRAKE
Applying the electric parking brake:
The electric parking brake can be applied regardless of the ignition switch position.
1 Depress the brake pedal.
2
Pull the electric parking brake switch UP to apply the brake.
Releasing the electric parking brake:
The electric parking brake can be released while the ignition is switched to ON or while the engine is running.
1 Depress the brake pedal.
2
Push the electric parking brake switch DOWN to release the brake.
Electric parking brake automatic release:
The electric parking brake is released automatically when the accelerator pedal is depressed and all of the following
conditions are met:
• The engine is running.
• The driver’s door is closed.
• The driver’s seat belt is fastened.
• Selector lever is in the D, M or R position.
AUTOHOLD
The AUTOHOLD feature holds the vehicle's brakes on, even
if you take your foot off the brake pedal. This function can be best used while sitting still in traffic or when waiting for
a traffic light to turn green.
1
Once completely stopped, push the AUTOHOLD button to turn the system on (the
green "HOLD" indicator light will come on).
2
Release your foot from the brake pedal.
3 Once you push the accelerator pedal again, the brakes will automatically release.
NOTE: For more information about the AUTOHOLD feature, refer to your Owner’s Manual.
Electric Parking
Brake Switch
AUTOHOLD Button
2364256 17a CX-5 SSG 030117.indd 513/1/17 5:53 PM