key battery MAZDA MODEL CX-7 2007 Quick Tips (in English)
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2007, Model line: MODEL CX-7, Model: MAZDA MODEL CX-7 2007Pages: 14, PDF Size: 1.77 MB
Page 4 of 14

GETTING STARTED
Always check the Owner’s Manual for more operating information and safety features 
Advanced 
keyless entry/
start system*
Advanced key 
must be carried 
by driver to 
operate properly
Refer to Owner’s Manual for 
addi tional instructions
Tip: Do not use advanced key
with activated cell phone in
the same hand, advanced key
functions may become disabled
Advanced keyless
system customization
Your authorized Mazda Dealer can
customize your system if desired
with features such as auto-lock:
After exiting the vehicle after driving,
the car will automatically lock
For additional information 
on customizable features, 
see Owner’s Manual Passenger’s door request switch:
Press (
5) on passenger’s door; all doors
and liftgate unlock simultaneously
Liftgate request switch: Press ( 6)
on liftgate, doors and liftgate 
will lock/unlock
Advanced key transmitter:
Press button ( 2) for driver’s
door; press again within 1 1/2 
seconds to unlock other doors
and liftgate, hold to lower front
windows and open moonroof,
release to stop
Activating panic alarmPanic alarm: Press and hold 
button ( 3) for more than 1 second;
horn sounds, hazard warning
lights flash; to stop, press any
remote button
compartments such as glove
box or in open liftgate/cargo
area, engine may not start or
warnings may activate
Turning off engine 
Turn start knob to ACC position
to turn engine off, push in and
turn start knob to LOCK position
Tip: Vehicle battery may be 
discharged if start knob is left
in ACC position
Always put vehicle in Park ( P), set
parking brake and turn start knob to
LOCK position when exiting vehicle
System operation warningsKEY indicator light flashes (green)
indicates advanced key transmitter
battery power is low 
KEY indicator light illuminated
continuously (red) indicates system
malfunction, and auxiliary key
should be used, have vehicle
inspected at an Authorized Mazda
Dealer as soon as possible
Tip:  When using advanced 
keyless system, system will
beep as confirmation of
lock/unlock requests, system
will also beep if start knob is
left in ACC position, advanced
key has been left in vehicle or
if advanced key is removed from
vehicle while vehicle is running
For additional system operation 
warnings, see Owner’s Manual
Replacing batterySee Owner’s Manual for 
complete instructions
Cautions on useTo avoid damage to advanced 
key, do not allow any severe
impacts or contact with liquids, 
do not place heavy objects on
advanced key and do not leave
advanced key exposed to direct
sunlight or high temperatures,
See Owner’s Manual for all 
cautions and warnings
Getting
Started
Getting
Started
12
4
3
*Denotes optional equipment
Starting enginePress start knob
( 7 ); when KEY
indicator (green)
illuminates on
instrument 
cluster; turn start knob ( 7) to
START position to start engine
Tip: Engine will not start if 
liftgate is open and advanced key
is placed in liftgate/cargo area
Auxiliary key operation
If advanced key cannot be used due
to a malfunction or dead battery,
use auxiliary key ( 4) to lock/unlock
doors and to start vehicle
To start vehicle: Remove start
knob cover ( 7) by pressing both
side release buttons ( 8) while
pulling; insert auxiliary key into
key cylinder and turn to start engine
Tip: Do not place advanced key
on or around dashboard, storage Locking doors
Driver’s/passenger’s door request
switch: Press (
5) once on either
door to lock other doors
Press and hold driver’s request
switch ( 5) to close windows and
moonroof, release to stop
Advanced key transmitter: 
Press button ( 1); pressing again
within a few seconds causes doors
to relock and horn to beep
Unlocking doors/
opening liftgate
Driver’s door request switch: Press
( 5 ) to unlock driver’s door; press
again within 3 seconds to unlock
other doors and liftgate
LOCK           ACC     ON   STARTPU SH
878
56 
Page 8 of 14

MIRRORS/WINDOWS
Always check the Owner’s Manual for more operating information and safety features 
6. Moonroof slide switch*
Press rear of switch to 
open moonroof
Press front of switch to close
Tip: With all doors closed,
moonroof and front windows
can be opened via Keyless
entry by pressing and holding
unlock button, or opened/
closed by turning and holding
driver’s door key toward 
front/rear of vehicle
7. Cargo light 
DOOR = Light on with any 
door or liftgate open
OFF = Light always off
Driver/passenger 
covered visor mirrors
To access mirror: Lower visor
Mirrors/
Windows
Interior
Lights
1. Map/reading light switch
Press on/off
2. Interior light switch
DOOR = Light on when door open
ON = Light always on
OFF = Light always off
3. Front interior light
4. Rear interior light
5. Moonroof tilt switch*
Press rear of switch to tilt 
rear of Moonroof
Press front of switch to closePower window
switches
With ignition ON 
All windows 
controlled from
driver’s armrest;
passenger doors
have separate switches
Front window switches 
One-touch down/up: Press/pull
AUTO switch (3) firmly and
release, window goes down/up 
all the way, press/pull briefly 
to stop, press/pull lightly and 
hold for normal operation
Tip: During closing window
operation, window will stop
and open partway if object 
blocks window operation
Power window lockout switch
Press button (5), only driver's 
window operates; press again 
for normal operationRear window switches
Push/pull (4) to open/close
Power window 
initialization procedure
If battery is disconnected or power
window fuse is replaced, the auto
open/close and anti-pinch features
will not function
Resetting procedure:
1. Turn ignition switch to “ON”  
position
2. Press power window switch 
down to fully open window, 
then pull switch up to close 
window completely, continue 
holding switch up for at least 
3 seconds, then release switch
3. Move to front passenger 
door and repeat Step 2 for 
front passenger window
4. After windows have been
initialized turn ignition to
“LOCK”, then back to “ON” Dual power mirrors
Ignition switch must be in ACC 
or ON position
Switch is on driver’s door
To adjust left/right mirror: 
Press selector switch (1) left/right,
press switch (2) in direction of
desired movement
Tip: To lock mirrors in place,
move selector switch (1) to 
center position
LR
2
1AUT
O
AUT
O5
34
O
F
FD
O
OR
TIL
TSLI
DE
121
3356
O
NO
F
FD
O
O
R
2
4
OFFDOO
R7
*Denotes optional equipment