clock MAZDA MODEL CX-9 2008 Quick Tips (in English)
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2008, Model line: MODEL CX-9, Model: MAZDA MODEL CX-9 2008Pages: 15, PDF Size: 2.04 MB
Page 7 of 15

LOCKS
Always check the Owner’s Manual for more operating information and safety features
LiftgateTo open: Pull
up on handle
(3) and raise;
to close: Push
liftgate down
with both hands
until in near-shut
position, easy closure system will
close liftgate completely.
Liftgate request switchLiftgate request switch* (4)
operation, see Getting Started.
Power
liftgate
close switch
Press (5) for
one second or
more; hazard
warning lights
flash twice;
liftgate closes automatically
after beep sound is heard.
WARNINGS: Always make
sure hatch opening is clear
before opening/closing
Never place hands or fingers
around liftgate because
liftgate closes automatically
from near-shut position, this
could cause hands and fingers
to be pinched and injured.
Child-safety
locks
Located at edge
of rear doors.
To activate:
Pull tab (6) up;
door opens from
outside only.
To cancel: Push tab (6) down.
WARNING: Since children
may access either rear door,
child-safety locks for both rear
doors should be activated.
Locks
Locks
Key
Operates ignition and all locks.
Tips: Use key number plate to
purchase a new key; store in
safe place separate from vehicle.
Only advanced keyless
system* automatically locks
doors when leaving with key
(dealer programmable feature).
Retractable type key
To fold/unfold press button (1).
Auxiliary key*See Getting Started
Manual door
locks
To lock: Press
front of button (1)
toward door handle.
To unlock: Pull front
of button away
from door handle.
Power door locks
To lock/unlock all doors and liftgate
from inside vehicle: Press bottom/
top of switch (2).
Using mechanical key to unlock
driver’s front door: Rotate key to
counterclockwiseposition for more
than one second to unlock other
doors and liftgate, continue to hold
key in unlock position to roll front
windows down and open moonroof.
Using key to lock all doors: Rotate
key to clockwise position, continue
to hold key in lock position to
roll front windows up and close
moonroof, release to stop.Keyless entry
system
Functions only
with ignition in
OFF position.
To lock doors:
Press button (2);
pressing again within a few
seconds causes doors to relock
and horn to beep.
To unlock: Press button (3)
for driver’s door; press again
within 3 seconds to unlock other
doors and liftgate, press and hold
to lower driver’s and passenger
windows and open moonroof,
release to stop.
Panic alarm: Press and hold
button (4) for more than 1
second; horn sounds, hazard
warning lights flash; to stop,
press any remote button.
34
6Lock
Unlock
5
Advanced
keyless entry/
start system/
auxiliary key*
See Getting
Started
Illuminated entry system
Activates interior lights when dome
light switch set to DOOR position;
lights off after driver’s door is
locked or ignition in ON position.
Immobilizer system
Prevents engine from running
unless coded key is used,
see Owner’s Manual.
WARNING: Never leave a child
alone in vehicle and never
leave any key where a child can
find it, particularly advanced
keys which give easier
access to a curious child.
2
1
1
234
*Denotes optional equipment
Page 11 of 15

CLIMATE CONTROLS
Always check the Owner’s Manual for more operating information and safety features
1. Air flow selections= air to dash
= air to dash and floor
= air to floor
= air to floor and windshield
= air to windshield (defrost)
2. Temperature control driver/passenger
Cooler/warmer = rotate knob
counterclockwise/clockwise
3. A/C = air conditioner
Press to turn on/off.
4. OFF Press to turn system OFF.
5. Fan control Rotate knob clockwise/
counterclockwise to increase/
decrease fan speed. 8. Air intake control
Press switch to alternate
between recirculated (Indicator
light on) or outside (Indicator
light off) air mode.
= recirculate inside air;
use for maximum cooling
WARNING: Do not use position in cold
weather, windows may
fog and hamper vision.
Automatic operation
Press AUTO ( 13) for automatic
operation; rotate outer dial to set
temperature, refer to information
display for air flow selection, see
Owner's Manual.
Tip: Automatic climate control
display viewed via information
display, see Audio Systems.
6. Outside Press Outside button ( 6) to display
outside temperature, press again
to switch display to temperature
set for air conditioner.
Tip: To change from
Fahrenheit to Centigrade
or vice versa: Press and
hold Outside button ( 6)
for 3 seconds or more.
7. Dual Press ( 7) to switch between
dual (driver/passenger) or
individual temperature (indicator
light on) operation modes. 9. Rear control
10. Seat warmer* Press on/off.
11. Rear window defogger
Press on/off; shuts off with
ignition or automatically after
15 minutes of operation; also
operates heated outside mirrors*.
12. Windshield defroster switch
Press: Fresh air position is
automatically selected, A/C
automatically turns ON.
Control positions for
maximum defrost
Fan to maximum, temperature
to maximum hot, selected.
Tip: To help prevent
windshield fogging in humid
weather, select before
starting engine.
To prevent moisture buildup,
never drive with system off.
Objects placed under the
front seats may interfere
with air flow to the rear.
Rear climate controlTurn air conditioning ( 3) on; press rear
control button ( 9), indicator light on,
rear passengers can now control fan
speed ( 14) and rear temperature ( 15).
Control On indicator ( 16) is
illuminated when rear climate
control is active.
Climate
Controls
Climate
Controls
AUTO
OFF DUAL
PASS
OUTSIDEA/C
MODE
5223137641
FRONT REAR REAR
CONTROL
LR CH
CH
1211101098
*Denotes optional equipment
CHOFFMAX
151416When rear control switch (9
) is
OFF; rear climate control is not
possible, temperature and airflow
operates in response to front
control settings.
Page 12 of 15

AM/FM STEREO/CD/CD CHANGER
Always check the Owner’s Manual for more operating information and safety features
6. SEEK/TRACKRadio: Press to automatically
seek higher/lower frequency.
CD: Press to select next
track/beginning of current track.
7. LOAD* To load multiple discs:
Press and hold LOAD ( 7) until
beep sound is heard; insert
CD when “IN” is indicated on
information display ( 19).
To eject disc: Press Eject ( 14).
To eject specific disc: Press
and hold Eject ( 14) until beep
sound is heard; within five
seconds press the desired tray
number 1-6 ( 15).
8. Scan Radio: Press to sample
strong stations, press again
to stop at current station.
CD: Press to play first few seconds
of each selection, press again
to stop at current selection.
/
/
1. Power/VolumePress to turn on/off; rotate
to increase/decrease volume.
2. Random Press to play CD selections
in random order, press again
to cancel.
3. Auto-Memory Press and hold until a beep sound
is heard; system automatically
scans and temporarily stores six
strong stations in each band;
press again to switch to another
preset station.
DISP
CD: Press repeatedly to scroll
through displays.
Text* : Rotate right/left to display
titles longer than 12 characters.
4. Tune Radio: Rotate counterclockwise/
clockwise for lower/higher
frequency.
5. SAT*, Satellite ready capability.
14. CD eject button
15. Memory preset buttonsTo set: Tune to station, press and
hold until beep sound is heard.
16. Disc / * Press to skip to next/previous CD.
17. Audio control Press to select ALC/BASS/TREB/
FADE/BAL/BEEP/Surround* OFF/
1/2/3, rotate right/left to adjust.
Tip: Automatic Level Control
(ALC) automatically adjusts
audio volume depending
on vehicle speed.
18. Reverse /Fast forward
Press to reverse/fast forward.
19. Information display
Has the following functions: Clock,
audio display, automatic climate
control display and outside
temperature display.
9. RPT Press to replay current CD selection.
10. FM/AM Press to turn radio on and
select between FM1/FM2/AM
station preset buttons ( 15).
11. CD slot
12. CD, Press to play CD.
13. Media (AUX) Select external digital devices.
Steering-wheel audio
controls
To increase/decrease volume:
Push up/press down ( 21).
Press ( 22) to mute Audio system or
activate Navigation Voice Command*.
Press ( 23) to select AM, FM 1, FM 2,
CD, RSES* and AUX mode.
Radio: Push up/press down
( 24 ) less than one second to select
next/previous preset station, for
two seconds until beep sound is
heard to seek next/previous station.
CD: Push up/press down ( 24) to
select next track, ( 24) to repeat
current track.
Navigation/Audio system*AudioPilot* (BOSE system)
Adjusts audio volume to level
of noise entering vehicle; press
on-screen button to turn ON/OFF.
Centerpoint* (BOSE system)
Delivers multi-channel surround
sound while listening to CDs.
/
Clock**To set: With ignition in ACC or ON
position, press ( A) and hold until beep
sounds; time flashes on display ( 20);
press H ( 6) to set hour; press M ( 6) to
set minutes, press ( A) to set. To set
12hr/24hr clock: Press ( 17) until 12hr/
24hr clock appears on display,
rotate ( 17) to desired setting,
while flashing, press to select.
Audio
Systems
Audio
Systems
SCAN
LOAD
RPT
H
M CLOCK RDM 4 5 6 DISC 1 3 DISC
FM/AM
MEDIA 2
SAT
111079814
PUSH AUDIO CONT AUDIO PUSH AUTO TEXT
VOLUME
TRACK SEEK
CD
PUSH POWER
13 1 12 2A 517 18 3 4
72.0 10:30 DISC IN 1 2 3 4 5 6 MD IN ST OUTSIDE PASSAF PTY RPT RDM TA TP AUTO-M AUTO DUAL
A/C oF 72.0 oF
16 6
19
1520
*Denotes optional equipment
**See Navigation Owner’s Manual for clock setting procedure if
equipped with Navigation System
VO L
+
– M
OD
E
2223
2124
Page 13 of 15

CARGO AREA
Always check the Owner’s Manual for more operating information and safety features
Cargo Area
Driving Tips
Spare tire
1. Temporary spare tire
Stored under vehicle; to change
flat tire: Follow instructions in
Owner’s Manual.
WARNING: Do not exceed
50 mph with temporary spare.
Tip: For instructions
and restrictions on use
of temporary spare tire,
see Owner’s Manual.
Gas cap
After filling vehicle with gasoline,
fully reinstall gas cap by turning
clockwise until a clicking sound is
heard, if gas cap is not fully installed,
Check Engine light and/or gas cap
indicator light may come on.
For more information on Check
Engine light, see Owner’s Manual.
Tire economy and tipsCheck tire pressure monthly when
tires are cold, use a digital tire
pressure gauge for accurate tire
pressure measurement.
Tires should be of the same
type and size.
Maintain correct front-end alignment
and tire balance; rotate tires at
5,000 or 7,500 mile intervals; see
Owner’s Manual for rotation chart.
Tire pressure Decal on Driver’s B-pillar provides
tire pressure information.
Tire Pressure Monitoring
System (TPMS)
Warning light illuminates for a
few seconds after ignition is on.
If tire pressure is too low in one
or more tires, warning light will
illuminate and beeper will sound;
flashing warning light indicates
possible malfunction; dealer
inspection required.
Anti-lock Braking
System (ABS)
ABS automatically reduces
hydraulic pressure to any wheel
on the verge of locking up.
You may feel a slight pulsing of
the brake pedal and hear a clicking
noise; this tells you the ABS is
functioning properly; increase pressure
on pedal for maximum braking.
Tips: Maintain constant
pressure on the brake pedal.
Do not pump the brakes.
2. Jack
Located behind panel
3. Lug wrench and jack lever
4. Spare tire carrier bolt
socket
5. Spare tire carrier bolt
Located behind panel
6. Spare tire hold down strap
7. Tiedown eyelet
8. Navigation DVD player*
†
Cargo area
9. Cargo securing loops
10. Cargo floor
Tip: Cargo floor cover can
be secured in raised position
by attaching third-row
straps (14) to underside
of floor cover.
11. Rear accessory socket
12. Rear auxiliary terminals*
13. Power outlet (AC 115V)*
Cargo light
Located on interior side of liftgate,
see Interior Lights for operation.
10 9911141312
3 7 12 58 46
ABS self test
A self-diagnostic test is
performed when starting;
you may feel some brake pedal
pulsation and hear some noise,
this is normal.
Traction Control System (TCS)
Enhances traction and safety
by regulating engine torque.
When TCS detects drive wheel
slippage it lowers engine torque
to prevent loss of traction.
Dynamic Stability Control (DSC)
Controls braking and engine
torque in conjunction with ABS
and TCS to help control side slip
on slippery surfaces or during
sudden or evasive maneuvering.
Roll Stability Control (RSC)
System determines when corrective
action is needed; by controlling
engine torque and braking on
each wheel.
*Denotes optional equipment†See Owner’s Manual