stop start MAZDA MODEL CX-9 2008 Quick Tips (in English)
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2008, Model line: MODEL CX-9, Model: MAZDA MODEL CX-9 2008Pages: 15, PDF Size: 2.04 MB
Page 4 of 15

GETTING STARTED
Always check the Owner’s Manual for more operating information and safety features
Advanced
keyless entry/
start system*
Advanced key
must be carried
by driver to
operate properly.
Refer to Owner’s Manual for
addi tional instructions.
Tip: Do not use advanced key
with activated cell phone in
the same pocket, advanced key
functions may become disabled.
Advanced keyless
system customization
Your authorized Mazda Dealer can
customize your system if desired
with features such as auto-lock,
which can be programmed to
automatically lock vehicle after
driving and exiting vehicle.
For additional information,
see Owner’s Manual. Passenger’s door request switch:
Press (
6) on passenger’s door; all doors
and liftgate unlock simultaneously.
Liftgate request switch: Press ( 7)
on liftgate, doors and liftgate
will lock/unlock.
Advanced key transmitter:
Press button ( 2) for driver’s
door; press again within 1 1/2
seconds to unlock other doors
and liftgate, hold to lower front
windows and open moonroof,
release to stop; with all doors
unlocked, press and hold button ( 3) for one second
or more to open/close liftgate.Activating panic alarmPanic alarm: Press and hold
button ( 4) for more than 1 second;
horn sounds, hazard warning
lights flash; to stop, press
any remote button.
area, engine may not start
or warnings may activate.
Turning off engine
Turn start knob to ACC position
to turn engine off, push in and
turn start knob to LOCK position.
Tip: Vehicle battery may be
discharged and vehicle security
compromised if start knob is
left in ACC position.
Always put vehicle in Park ( P), set
parking brake and turn start knob to
LOCK position when exiting vehicle.
System operation warningsKEY indicator light flashes (green)
indicates advanced key transmitter
battery power is low.
KEY indicator light illuminated
continuously (red) indicates system
malfunction, and auxiliary key
should be used, have vehicle
inspected at an Authorized Mazda
Dealer as soon as possible.
Tip: When using advanced
keyless system, unless
reprogrammed by dealer,
system will beep as confirmation
of lock/unlock requests, system
will also beep if start knob is
left in ACC position, advanced
key has been left in vehicle or
if advanced key is removed from
vehicle while vehicle is running.
For additional system operation
warnings, see Owner’s Manual.
Replacing batterySee Owner’s ManualCautions on useTo avoid damage to advanced
key, do not allow any severe
impacts or contact with liquids,
do not place heavy objects on
advanced key and do not leave
advanced key exposed to direct
sunlight or high temperatures,
see Owner’s Manual for all
cautions and warnings.
Getting
Started
Getting
Started
1 2
5
4 3
*Denotes optional equipment
Starting enginePress start knob
( 8 ); when KEY
indicator (green)
illuminates on
instrument
cluster; turn start knob ( 8) to
START position to start engine.
Auxiliary key operationIf advanced key cannot be used
due to a malfunction or dead
advanced key battery, use auxiliary
key ( 5) to lock/unlock doors and
to start vehicle.
To start vehicle: Remove start
knob cover ( 8) by pressing both
side release buttons ( 9) while
pulling; insert auxiliary key into
key cylinder and turn to start engine.
Tip: Do not place advanced key
on or around dashboard, storage
compartments such as glove
box or in open liftgate/cargo Locking doors
Driver’s/passenger’s door request
switch: Press (
6) once on either
door to lock other doors.
Press and hold driver’s door request
switch ( 6) to close windows and
moonroof, release to stop.
Advanced key transmitter:
Press button ( 1); pressing again
within a few seconds causes doors
to relock and horn to beep.
Unlocking doors/
opening liftgate
Driver’s door request switch: Press
( 6 ) to unlock driver’s door; press
again within 3 seconds to unlock
other doors and liftgate.
LOCK ACC ON STARTPU SH
989
6
7
Page 6 of 15

INSTRUMENT CLUSTER
Always check the Owner’s Manual for more operating information and safety features
WARNING LIGHTS
• Cruise control onAmber light: Cruise control system
activated; Green light: Cruising
speed set; see Getting Started
• Tire Pressure Monitoring System (TPMS)*,
see Driving Tips
• High beams on • Engine oil-pressure Stop car when safe and turn
off engine; check oil level
• Brake system Parking brake on/low brake fluid
• Always fasten seat belts • Security indicator light*
• KEY*,see Getting Started
• O Low fuel
• BSM OFF*BSM system is deactivated,
see Getting Started
BSM
OFF
GAUGES
1. Instrument cluster dimmer select knob
With headlights ON: Rotate knob
to increase/decrease brightness.
Headlights/parking lights ON,
ignition key ON: Illumination
changes brightness when knob
is pressed.
2. Tachometer
3. Gear position indicator Displays current gear
position or manual mode.
4. Gear indicator Displays current gear
when in D or M.
5. Speedometer
6. Odometer/Trip meter selector
Press to view odometer, trip
meter A and B; press and hold
to reset trip meter A/B settings.
• Check engineDealer inspection required if light
remains on, see Owner’s Manual
• Charging system Charging system malfunction;
dealer inspection required
• Air bag/front seat belt pretensioner system
If light flashes or stays on, the air
bags/front seat belt pretensioners
may not operate in an accident;
dealer inspection r equired
• AT Automatic transaxle*
Automatic transaxle malfunction;
dealer inspection required
• Anti-lock Brake System (ABS)
ABS malfunction, normal brakes
only; dealer inspection required
• Check fuel cap Fuel cap not securely tightened
• Door ajar
7. Engine coolant temperature gauge
Stop car if above normal
range, turn off engine, let
vehicle cool; check coolant
level when safe.
InstrumentCluster
Instrument Cluster
km/h mph
E F H
C
x1000r/min2 3
4
5
6
7
8
TRIP
1 0
0
20 40
60
80
10 0
12 0
140 220
20
40
60
80
100
120
140
160
18 0
200
P
R
N
D
M
8
2112
382.3
8 7 9
4 1 6 2 5
KEY
CRUISE
AT
4WD
3
BSM
OFF
8. Odometer/Trip meter
9. Fuel gauge 20.1-gallon/76-liter tank
CRUISE• TCS OFFTraction Control System is
deactivated
• Lights ON indicator light*
• Traction Control System (TCS)/Dynamic
Stability Control (DSC)/
Roll Stability Control (RSC)
Light flashes when system is
activated while driving; dealer
inspection required if light
remains on
•
4WDAWD warning light*
Flashing lamp indicates high
temperature differential oil,
illuminated lamp indicates an
abnormality with AWD system;
dealer inspection required
• Powertrain malfunction/ reduced power
Dealer inspection required if light
remains on, see Owner’s Manual
*Denotes optional equipment
Page 7 of 15

LOCKS
Always check the Owner’s Manual for more operating information and safety features
LiftgateTo open: Pull
up on handle
(3) and raise;
to close: Push
liftgate down
with both hands
until in near-shut
position, easy closure system will
close liftgate completely.
Liftgate request switchLiftgate request switch* (4)
operation, see Getting Started.
Power
liftgate
close switch
Press (5) for
one second or
more; hazard
warning lights
flash twice;
liftgate closes automatically
after beep sound is heard.
WARNINGS: Always make
sure hatch opening is clear
before opening/closing
Never place hands or fingers
around liftgate because
liftgate closes automatically
from near-shut position, this
could cause hands and fingers
to be pinched and injured.
Child-safety
locks
Located at edge
of rear doors.
To activate:
Pull tab (6) up;
door opens from
outside only.
To cancel: Push tab (6) down.
WARNING: Since children
may access either rear door,
child-safety locks for both rear
doors should be activated.
Locks
Locks
Key
Operates ignition and all locks.
Tips: Use key number plate to
purchase a new key; store in
safe place separate from vehicle.
Only advanced keyless
system* automatically locks
doors when leaving with key
(dealer programmable feature).
Retractable type key
To fold/unfold press button (1).
Auxiliary key*See Getting Started
Manual door
locks
To lock: Press
front of button (1)
toward door handle.
To unlock: Pull front
of button away
from door handle.
Power door locks
To lock/unlock all doors and liftgate
from inside vehicle: Press bottom/
top of switch (2).
Using mechanical key to unlock
driver’s front door: Rotate key to
counterclockwiseposition for more
than one second to unlock other
doors and liftgate, continue to hold
key in unlock position to roll front
windows down and open moonroof.
Using key to lock all doors: Rotate
key to clockwise position, continue
to hold key in lock position to
roll front windows up and close
moonroof, release to stop.Keyless entry
system
Functions only
with ignition in
OFF position.
To lock doors:
Press button (2);
pressing again within a few
seconds causes doors to relock
and horn to beep.
To unlock: Press button (3)
for driver’s door; press again
within 3 seconds to unlock other
doors and liftgate, press and hold
to lower driver’s and passenger
windows and open moonroof,
release to stop.
Panic alarm: Press and hold
button (4) for more than 1
second; horn sounds, hazard
warning lights flash; to stop,
press any remote button.
34
6Lock
Unlock
5
Advanced
keyless entry/
start system/
auxiliary key*
See Getting
Started
Illuminated entry system
Activates interior lights when dome
light switch set to DOOR position;
lights off after driver’s door is
locked or ignition in ON position.
Immobilizer system
Prevents engine from running
unless coded key is used,
see Owner’s Manual.
WARNING: Never leave a child
alone in vehicle and never
leave any key where a child can
find it, particularly advanced
keys which give easier
access to a curious child.
2
1
1
234
*Denotes optional equipment