oil MAZDA MODEL MILLENIA 2001 Quick Tips (in English)

Quick Tips 2001 Mazda Millenia page 20
page 1
Revised January 9, 2001
MAINTENANCE SCHEDULE
Maintenance notes:
Rotate tires every 3,750 miles
Replace cabin air filter
‡once a year
or every 12,000 miles†A.Change: Engine oil/replace filter
B.Inspect: Drive belts, fuel lines and
hoses, idle speed, brake lines,
hoses and connections, disc
brakes, steering operation and
linkages, front and rear suspension
ball joints, driveshaft dust boots,
chassis and body bolts, exhaust
system and heat shields, automatic
transaxle fluid level
Replace: Air filter, spark plugs (2.5L)
C.Change: Engine coolant
D.Inspect: Engine valve clearance (2.3L),
hoses and tubes for emission system
Inspect (2.5L)/replace (2.3L):
Engine timing belt
†Replace: Spark plugs (2.3L) * Special operating conditions
† See Owner’s Manual
‡ Denotes optional equipment
This Quick Tips®guide is provided
by MazdaTown to make your
Mazda ownership experience more
convenient. It is not intended to
replace your Owner’s Manual.
If you have any questions about
your vehicle, you are invited to
contact your local dealer.
Or if you need additional help,
feel free to call our
Customer Assistance Center
at 1-800-222-5500
Monday through Friday,
8 am-5 pm
5,000 miles*
7,500 miles
15,000 miles
22,500 miles
30,000 miles
37,500 miles
45,000 miles
52,500 miles
60,000 miles
67,500 miles
75,000 miles
82,500 miles
90,000 miles
A B A
A C A A B D A A C A
A B
A
A A
A
Tip: For additional service
intervals and complete details,
see Owner’s Manual©2001 Calcar, Quick Tips®is a trademark
of Calcar, made in USA 7/00 46M GL
Mazda North American Operations reserves
the right to change product specifications at
any time without incurring obligations.
Reference
Guide for
Controls and
Functions
Get in. Be moved.®
2001
Quick Tips®

INSTRUMENT CLUSTER
Always check the Owner’s Manual for more operating information and safety features
Instrument
Cluster
Instrument
Cluster
Quick Tips 2001 Mazda Millenia page 4
page 5
Revised January 9, 2001
HOLD TCS
PRND
L8888
888888ODO TRIPAB08 172
H
CE F
mphx1000r/minkm/h
354
6
0 160 20
0 20 406080
180
200
220
240
260 100 160120 140140 4060 10080
120
S
2
15
42020321
18
191413151617121110987625242322
11. Traction control
system*, Light flashes when
in use; dealer inspection
required if light remains on
12. Traction control off*,
see Transmission
13. Brake system
Parking brake on/low fluid level
14. Door ajar
15. Anti-lock Brake
System (ABS)
ABS malfunction, normal
brakes only, dealer inspection
required
16. Low washer fluid*
17. Always fasten
safety belts18. Charging system
warning light
Dealer inspection required
19. Low engine oil
pressure warning light
Stop vehicle and turn off
engine; check oil level
20. Turn signals/hazard
warning on
21. High beams on
22. Low fuel
23. Air bag readiness
Air bag malfunction,
dealer inspection required
24. Check engine
Dealer inspection required
25. Cruise control onGAUGES
1. Coolant temperature
gauge
If above normal range, stop
vehicle and turn off engine;
check coolant level when safe
2. Tachometer
3. Gear indicator
4. Speedometer
5. Fuel gauge
18-gallon/68-liter tank
6. Trip odometer reset button
7. Trip odometer
8. Odometer
WARNING LIGHTS
9. Lights on
10. Hold mode on,
see Transmission
*Denotes optional equipment

UNDER HOOD
Always check the Owner’s Manual for more operating information and safety features
Under
Hood
Quick Tips 2001 Mazda Millenia page 18
page 19
Revised January 9, 2001
1. Engine oil dipstick
Engine oil should be between
F and L marks on dipstick
2. Coolant filler cap
Remove cap only when safe
and engine is cool
3. Automatic transmission
fluid dipstick
Check with engine on at
operating temperature;
fluid level should be within
v-notches on dipstick
4. Brake fluid reservoir
Level should be kept at the
MAX mark on reservoir; fill
with DOT 3 fluid from a
sealed container
5. Battery
6. Fuse block
(fuses and relays)
7. Air filter
8. Engine coolant reservoir
Level should be between FULL
and LOW lines when coldWARNING: Never remove
coolant filler or reservoir cap
while engine is running or
hot; remove only when safe
9. Hood latch
Pull hood latch up to open
10. Engine oil filler cap,
see Owner’s Manual for
recommended viscosity11. Power steering fluid
reservoir
Level should be between
MIN and MAX
12. Windshield washer
reservoir
Fill with windshield
washer fluid132456111456
77829101289101112
3
Break-in period
First 600 miles: Avoid heavy
braking and acceleration; drive at
varying road and engine speeds
Tip: Follow same procedures
with overhauled engine or
when brakes are replaced
Anti-lock Braking System
(ABS)
When brake pedal is pressed, ABS
automatically reduces hydraulic
pressure to any wheel on the
verge of locking up
You may feel a slight pulsing
of the brake pedal and hear a
clicking noise; this tells you the
ABS is functioning properly;
increase pressure on pedal
for maximum brakingTips: Maintain constant
pressure on the brake pedal
Do not pump the brakes
Traction Control System*
Automatically applies and releases
brakes to prevent excessive wheel
spin at all speeds, especially when
accelerating on slippery surfaces
Tire economy and tips
Check pressure at least monthly
when tires are cold
Maintain correct front-end
alignment and tire balance;
rotate tires at 3,750-mile
intervals; see Owner’s Manual
for rotation chartTire pressure
Decal on the edge of the
driver’s door provides tire
pressure information
Tire chains*
Install only on front tires;
install as tightly as possible and
retighten periodically
Gasoline
Unleaded regular
87-octane
minimum (2.5L)
92-octane
minimum (2.3L)
18-gallon/
68-liter tank
2.5L DOHC V6 Miller Cycle 2.3L DOHC V6
*Denotes optional equipment