fuse MAZDA MODEL MPV 2001 Quick Tips (in English)

DRIVER’S VIEW
Always check the Owner’s Manual for more operating information and safety features
1. Power window switches*,
see Switches/Locks
2. Power door locks*,
see Locks
3. Fog lights*
Press on/off; functions only
with headlight low beams on
4. Air vents
5. Turn signal/lighting
control lever,
see Driver Controls
6. Power outside mirror
switch*, see Switches
7. Horn and driver’s air bag
8. Gearshift lever,
see Transaxle9. Hazard warning switch
Push on/off
10. Audio system,
see Audio System
11. Lighter
12. Climate control panel,
see Climate Controls
13. Cupholder/ashtray
14. Front console
15. Parking brake lever
16. Wiper/washer lever,
see Driver Controls17. Cruise control lever*,
see Driver Controls
18. Tilt steering wheel lever
Pull lever down, position
wheel; push lever up
19. Instrument panel
lighting
Turn thumb-wheel up/down
to increase/decrease intensity
20. Hood release handle
21. Fuse panel
22. Remote fuel door release
Driver’s
View
Quick Tips 2001 Mazda MPV page 2
page 3
Revised January 9, 2001
Key
Operates ignition and
all locks
Tip: Use key number
plate to purchase a new
key; store in safe place
separate from vehicle
Immobilizer system*
Prevents engine from
starting unless coded
key used; see Owner’s
Manual
Remote Keyless
Entry System*,
see Locks
21
1243567
17
1618
449108
12
11
13
141920
1522
*Denotes optional equipment

UNDER HOOD
Always check the Owner’s Manual for more operating information and safety features
Under Hood
Quick Tips 2001 Mazda MPV page 18
page 19
Revised January 9, 2001
1. Power steering fluid
reservoir
Check with engine off; fill to
MAX mark
2. Engine coolant reservoir
Level should be between F and
L lines when cold
WARNING: Never remove
coolant reserve tank cap
while engine is running or
hot; remove only when safe
Break-in period
First 600 miles: Avoid heavy
braking and acceleration; drive at
varying road and engine speeds
Tip: Follow same procedures
with overhauled engine or
when brakes are replaced
Anti-lock Brake System (ABS)*
When brake pedal is pressed, ABS
automatically reduces hydraulic
pressure to any wheel on the
verge of locking up
You may feel a slight pulsing
of the brake pedal and hear a
clicking noise; this tells you the
ABS is functioning properly;
increase pressure on pedal
for maximum braking
Tips: Maintain constant
pressure on the brake pedal
Do not pump the brakesTire economy and tips
Check pressure at least monthly
when tires are cold
Maintain correct front-end
alignment and tire balance; rotate
tires at 3,750-mile intervals; see
Owner’s Manual for rotation chart
Tire pressure
Decal on the edge of the
driver’s door provides tire
pressure information
Tire chains*
Tire chains can damage aluminum
wheels; use on steel wheels only
Tip: Use only SAE class “S”
chains, install only on rear
tires; install as tightly as
possible and retighten
periodically3. Automatic transaxle
fluid dipstick
Check with engine on at
operating temperature;
fluid level should be within
v-notches on dipstick
4. Brake fluid reservoir
Level should be kept at the
MAX mark on reservoir; fill
with DOT 3 fluid from a
sealed container 5. Air filter
6. Power distribution box
(fuses and relays)
7. Battery
8. Hood latch
Pull hood latch up, open hood
9. Engine oil filler cap
SAE 5W-30 recommended for
all temperatures
10. Engine oil dipstick
Check with engine off and at
operating temperature; do not
fill above MAX line
11. Windshield washer
reservoir
Fill with windshield
washer fluid
8971011
1
2
6
5
432.5-liter 24V V6
Gasoline
Unleaded
regular
87-octane
minimum
18.5-gallon/
70-liter tank
*Denotes optional equipment