tow MAZDA MODEL MX-5 2015 Quick Guide (in English)

Front edge
Before Driving
6
Lowering the Convertible Top
6. Standing outside of the vehicle, hold the convertible top along the front edge
and pull it toward the vehicle rear.
7. Move the convertible top rearward and fold it while pressing the rear glass
lightly with your hand.
For details, refer to Section 3, “Convertible Top (Soft Top)”.
8. With the back end of the convertible top pressed, press the front end until a
latch sound is heard.
Lightly rock the retracted convertible top to make sure it is securely locked.
/:A'8'''A'FKVKQPA3WKEM)WKFGKPFD

7
Before Driving
Unlock Lever
Front edge
Anchor Striker Convertible tops handles
For details, refer to Section 3, “Convertible Top (Soft Top)”.
Raising the Convertible Top
1. Make sure the parking brake is applied.
3. Pull up the unlock lever to disengage the lock. 2. If the engine is running, turn it off.
4. Standing outside of the vehicle, hold the convertible top along the front edge
and pull it towards the vehicle front.
5. Sitting in a seat, grasp the convertible top's handles, and press the convertible
top against the windscreen.
Make sure the striker engages with the anchor, move the top latch slowly, and
then push the top latch upward until a latch sound is heard.
/:A'8'''A'FKVKQPA3WKEM)WKFGKPFD

If Trouble Arises
20
If Trouble Arises
• Flat Tyre
Either run-flat tyres or conventional tyres are equipped on your Mazda depending
on the specification, therefore the procedure for repairing a flat tyre differs
depending on the type of tyre. Before driving, make sure which type of tyre is
equipped on your Mazda. If you cannot identify your tyre type, consult an expert
repairer, we recommend an Authorised Mazda Repairer.
• Overheating
1. Drive safely to the side of the road and park off the right-of-way.
2. Check whether coolant or steam is escaping from the engine compartment.
If steam is coming from the engine compartment:
Do not go near the front of the vehicle. Stop the engine.
Wait until the steam dissipates, then open the bonnet and start the engine.
If neither coolant nor steam is escaping:
Open the bonnet and idle the engine until it cools.
• Towing Description
We recommend that towing be done only by an expert repairer, we recommend
an Authorised Mazda Repairer or a commercial tow-truck service.
• Warning Lights and Warning Sounds
If a warning light illuminates or flashes or a warning sound is heard, check for
details concerning the warning light or sound in this guide. If the problem
cannot be resolved, contact an Authorised Mazda Repairer.
For details, refer to Section 7, “Flat Tyre”, “Overheating”, “Emergency Towing” or
“Warning/Indicator Lights and Warning Sounds”.
/:A'8'''A'FKVKQPA3WKEM)WKFGKPFD