warning light MAZDA MODEL MX-5 2015 Quick Guide (in English)
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2015, Model line: MODEL MX-5, Model: MAZDA MODEL MX-5 2015Pages: 24, PDF Size: 1.04 MB
Page 3 of 24

1
Essential Safety Equipment
Active bonnet warning light
Actuator
Sensor
Electronic control unit
In the unlikely event that the vehicle were to hit a pedestrian and a certain amount
of impact is applied to the front of the vehicle, impact to the head of the pedestrian
if it were to hit the bonnet is lessened by the rear area of the bonnet raising
instantly to maintain a wide space between it and the parts in the engine
compartment. If the sensor installed to the back of the front bumper detects a
certain amount of impact by a collision with a pedestrian or other obstruction
while the vehicle is being driven at a speed sufficient to activate the system, the
system is activated and the bonnet is raised.
Active Bonnet Seat Operation
The following seat adjustment functions for the manual seats are available.
Seat Slide
Height Adjustment
for Front Edges of
Seat Bottom
(Driver's Seat)
For details, refer to Section 2, “Seats”, “Active Bonnet”.
Seat Recline
/ : A ' 8 ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 12 of 24

10
When Driving
i-stop OFF Switch
By pressing the switch until a beep sounds,
the i-stop function is turned off and the i-stop
warning light (amber) in the instrument
cluster turns on. By pressing the switch again
until the beep sounds, the i-stop function
becomes operational and the i-stop warning
light (amber) turns off.
i-stop Warning Beep
If the driver's door is opened while engine idling is stopped, the warning sound
operates to notify the driver that engine idling is stopped. It stops when the driver's
door is closed.
i-stop indicator light (green)/i-stop warning light (amber)
i-stop indicator light (green)
• The light turns on while engine idling is stopped and turns
off when the engine is restarted.
Engine idling stop conditions are met while the vehicle
is being driven.
• The light turns on when the ignition is switched ON and
turns off when the engine is started. i-stop warning light (amber)
• The light turns on when the i-stop OFF switch is
pressed and the system is turned off. • (Except European model)
For details, refer to Section 4, “Start/Stop Engine”.
/ : A ' 8 ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 13 of 24

When Driving
11 For details, refer to Section 4, “Instrument Cluster and Display”.
Some of the warning/indicator lights are displayed in the instrument cluster.
If a warning/indicator light is displayed in the instrument cluster, verify the
meaning of the warning in the Warning (Display Indication) item.
Warning/Indicator Lights
Signal Warning/Indicator Lights
1
2
3
4
5
6
7
8
9ABS Warning Light Master Warning Light
Charging System Warning Light
Engine Oil Warning Light
Check Engine Light
High Engine Coolant Temperature
Warning Light (Red)/ Low Engine Coolant
Temperature Indicator Light (Blue)
i-stop Warning Light (Amber)
/Indicator Light (Green)
Automatic Transmission Warning Light10
Power Steering Malfunction Indicator Light
19
2124
26
27High Beam Control System (HBC)
Warning Light (Amber) /Indicator
Light (Green) Signal Warning/Indicator Lights
Brake System Warning Light
20
KEY Warning Light (Red) /Indicator
Light (Green)Lane Departure Warning System
(LDWS) Warning Light
23
Blind Spot Monitoring (BSM)
OFF Indicator Light LED Headlight Warning Light
Lane Departure Warning System
(LDWS) OFF Indicator Light
17 11
12
13Air Bag/Seat Belt Pretensioner
System Warning Light
Low Fuel Warning Light
15
Seat Belt Warning Light
Door-Ajar Warning Light
14
Low Washer Fluid Level Warning Light18
Tyre Pressure Monitoring System
Warning Light
28
34
35
36
37i-ELOOP Warning Light
(Amber)/Indicator Light (Green)
Shift Position Indication
38
39
Headlight High-Beam Indicator Light
Direction Indicator/Hazard Warning
Indicator Lights
Security Indicator Light
Cruise Main Indicator Light (Amber)
/Cruise Set Indicator Light (Green)
Wrench Indicator Light
30
31
32
33TCS/DSC Indicator Light
Lights-On Indicator Light
Select Mode Indication
29
Adjustable Speed Limiter Main Indicator
Light(Amber)/ Adjustable Speed Limiter
Set Indicator Light (Green)
40Rear Fog Light Indicator Light
120 km/h Warning Light
16
22
25
Electric Vacuum Pump Warning Light
Active Bonnet Warning Light
Flat Tyre Warning LightDSC OFF Indicator Light
Passenger Air Bag Deactivation
Indicator Light
/ : A ' 8 ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 16 of 24

When Driving
14 For details, refer to Section 4, “i-ACTIVSENSE”.
i-ACTIVSENSE
i-ACTIVSENSE is a collective term covering a series of advanced safety and driver
support systems which make use of a Forward Sensing Camera (FSC) and radar
sensors.
Driver awareness support systems
• Adaptive Front Lighting System (AFS)
• High-Beam Control system (HBC)
• Lane Departure Warning System (LDWS)
• Blind Spot Monitoring (BSM)
Because each system has its limitations, always drive carefully and do not rely
solely on the systems.
Nighttime visibility
Left/right side and rear side detection
• Rear Cross Traffic Alert (RCTA)
Rear obstruction detection when leaving a parking space
• Adjustable Speed Limiter
Speed control Driver support system
/ : A ' 8 ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 19 of 24

17
When Driving
The Tyre Pressure Monitoring System (TPMS) monitors the air pressure of all
four tyres. If the air pressure of one or more tyres is too low, the system warns the
driver by indicating the tyre pressure monitoring system warning light in the
instrument cluster and operating a beep sound.
In the following cases, system initialization must be performed so that the system
operates normally.
• A tyre pressure is adjusted.
• Tyre rotation is performed.
• A tyre or wheel is replaced.
• The tyre pressure monitoring system warning
light is illuminated.
Tyre Pressure Monitoring System
For details, refer to Section 4, “Tyre Pressure Monitoring System”.
Vehicle with Conventional Tyres
The Tyre Pressure Monitoring System (TPMS) monitors the pressure for each tyre. Vehicle with Run-flat Tyres
If tyre pressure is too low in one or more tyres, the system will inform the driver
via the warning light in the instrument cluster and by the warning beep sound.
/ : A ' 8 ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 22 of 24

If Trouble Arises
20
If Trouble Arises
• Flat Tyre
Either run-flat tyres or conventional tyres are equipped on your Mazda depending
on the specification, therefore the procedure for repairing a flat tyre differs
depending on the type of tyre. Before driving, make sure which type of tyre is
equipped on your Mazda. If you cannot identify your tyre type, consult an expert
repairer, we recommend an Authorised Mazda Repairer.
• Overheating
1. Drive safely to the side of the road and park off the right-of-way.
2. Check whether coolant or steam is escaping from the engine compartment.
If steam is coming from the engine compartment:
Do not go near the front of the vehicle. Stop the engine.
Wait until the steam dissipates, then open the bonnet and start the engine.
If neither coolant nor steam is escaping:
Open the bonnet and idle the engine until it cools.
• Towing Description
We recommend that towing be done only by an expert repairer, we recommend
an Authorised Mazda Repairer or a commercial tow-truck service.
• Warning Lights and Warning Sounds
If a warning light illuminates or flashes or a warning sound is heard, check for
details concerning the warning light or sound in this guide. If the problem
cannot be resolved, contact an Authorised Mazda Repairer.
For details, refer to Section 7, “Flat Tyre”, “Overheating”, “Emergency Towing” or
“Warning/Indicator Lights and Warning Sounds”.
/ : A ' 8 ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D