heater MAZDA MODEL MX-5 2016 Smart Start Guide (in English)

32
Automatic
Transaxle Warning
Blind Spot Monitoring OFF
(BSM) (p. 23)
KEY Warning RED
KEY Indicator GREEN
Door Ajar
Low Washer Fluid
Level Warning
Check Fuel Cap
Perform Maintenance
Lane Departure
Warning System (LDWS)
ON ( AMBER )
Lane Detected ( GREEN)
3
( p. 21)
Lane Departure

Warning System (LDWS)
OFF ( AMBER )
1 • Rotate the knob to adjust the brightness of the instrument cluster and o\
ther dashboard illuminations.2 • Push to toggle between trip meter (A & B).
• When a trip meter is selected, push and hold to reset to zero.
ENGINE COOLANT TEMP LIGHTS
Since this vehicle does not use an engine
coolant temperature gauge, red and blue
engine coolant temperature lights are used to
indicate high and low coolant temperature.
Red Coolant Temp Light
Flashing : Engine is starting to run hot.
Drive slowly to reduce engine load.
On: Engine is overheating. Safely pull
over to the side of the road and turn
the engine off. Refer to the Owner’s
Manual for more information.
Blue Coolant Temp Light On: Engine coolant is cold and no warm
air is available for heater/defroster.
Off: Engine coolant is warm and
warm air is available for heater/
defroster. The light may stay on for a
few minutes after start-up when the
engine is cold, but the vehicle can
be driven with the light on or off.
SPEEDOMETER
1860318_16_Mazda_MX5_SSG_051115.indd 325/11/15 5:50 PM
www.MazdaUSA.com