window MAZDA MODEL MX-5 MIATA 2006 User Guide

Black plate (93,1)
qOpening the Trunk Lid from the
Inside
Slide the inside trunk release lever in the
direction of the arrow. The lever is made
of material that will glow for hours in the
darkness of the trunk following a brief
exposure to ambient light.
The inside trunk release lever is located
on the inside of the trunk end trim.
Power Windows
The ignition switch must be in the ON
position for the power windows to
operate.
WARNING
Closing Power Windows:
Closing power windows are
dangerous. A person's hands, head, or
even neck could be caught by the
window and result in serious injury or
even death.
This warning applies especially to
children. Make sure the opening is
clear before closing a window.
Keys and Children:
Leaving children in a vehicle with the
key is dangerous. This could result in
someone being badly injured or even
killed. They could play with power
windows or other controls, or even
make the vehicle move. Don't leave the
keys in your vehicle with children and
keep them in a place where your
children will not find or play with
them.
Knowing Your Mazda
Doors and Locks
3-35
MX-5_8U35-EA-05F_Edition4 Page93
Thursday, October 6 2005 11:3 AM
Form No.8U35-EA-05F

Black plate (94,1)
qOperating the Driver's Side
Power Window
Manual opening/closing
To open the window to the desired
position, lightly hold down the switch.
To close the window to the desired
position, lightly pull up the switch.
Close
Open
Left window
Auto-opening
To fully open the window automatically,
press the switch completely down.
To stop the window partway, lightly pull
up the switch and then release it.
q Operating the Passenger Power
Window
To open the window to the desired
position, hold down the switch.
To close the window to the desired
position, pull up the switch.
Close
Open
Right window
3-36
Knowing Your Mazda
Doors and Locks
MX-5_8U35-EA-05F_Edition4 Page94
Thursday, October 6 2005 11:3 AM
Form No.8U35-EA-05F

Black plate (99,1)
lBefore lowering or raising the
convertible top, stop in a safe place off
the right-of-way and park on a level
surface.
lMake sure nothing is on the convertible
top or near the back window when
raising or lowering the convertible top.
Even small objects may interfere and
cause damage.
lWhen lowering the convertible top,
make sure objects inside the vehicle
aren't blown away by the wind.
lSecure all loose objects inside before
driving with the convertible top down.
lTo help prevent burglary or vandalism
and to ensure that the passenger
compartment stays dry, close the
convertible top securely and lock both
doors when leaving the vehicle.
lDon't drive through an automatic car
wash; it may damage the convertible
top.
lDon't raise or lower the convertible top
when the temperature is below 5 °C
(41 °F) ; this will damage the
convertible top material.
lDon't lower the convertible top when
it's wet. If the convertible top dries
while folded, it will deteriorate and
shrink.
lLowering the convertible top while it's
wet can also cause water to drip into
the passenger compartment.
lDon't raise or lower the convertible top
when the wind is strong; the wind
could damage the convertible top.
qLowering the Convertible Top
1. Make sure the parking brake is applied.
2. Fully open the left and right windows.
3. Turn off the engine.
4. Make sure there are no objects which
have been placed in the area where the
convertible top is to be retracted.
WARNING
Objects in the Convertible Top Storage
Area:
Putting heavy or sharp objects in the
convertible top storage area is
dangerous.
During a sudden stop or collision, they
can become projectiles that might hit
and injure passengers.
Do not place heavy or sharp objects in
the convertible top storage area.
5. Pull the top latch outward by pressing the unlock button to detach the lock.
Make sure the lock is detached.
Unlock button
Top latch
Knowing Your Mazda
Doors and Locks
3-41
MX-5_8U35-EA-05F_Edition4 Page99
Thursday, October 6 2005 11:3 AM
Form No.8U35-EA-05F

Black plate (101,1)
qRaising the Convertible Top
1. Make sure the parking brake is applied.
2. Fully open the left and right windows.
3. Turn off the engine.
4. Pull the unlock lever outward to
disengage the lock.
Unlock lever
5. Standing outside of the vehicle, holdthe convertible top along the center
edge and pull it towards the vehicle
front.
Center edge
NOTE
To raise the convertible top from inside
the vehicle, use the convertible top's
handles.
Convertible top's
handles
6. Sitting in a seat, grasp the convertible
top's handles, and press the convertible
top against the windshield.
Move the top latch slowly to make sure
the anchor engages with the striker,
then push the top latch upward until a
click sound is heard.
Striker
Anchor
Convertible top's
handles
Knowing Your Mazda
Doors and Locks
3-43
MX-5_8U35-EA-05F_Edition4 Page101
Thursday, October 6 2005 11:3 AM
Form No.8U35-EA-05F

Black plate (102,1)
CAUTION
Driving with the convertible top not
fully locked could damage the
convertible top.
If the red indicator is visible on the
unlock button, the convertible top is not
locked. After locking the convertible
top, verify that the red indicator is not
visible.
Locked position
Unlocked position Red indicator
NOTE
Make sure the convertible top is
securely locked by pushing up on it. If
it still sounds loose (rattles) after being
locked by the top latch, have it
inspected at an Authorized Mazda
Dealer. 7. Connect the rear window defroster
coupler if it has been disconnected.
qTaking Care of the Top
Refer to Convertible Top Maintenance
(page 8-53) for information on taking care
of the convertible top.
3-44
Knowing Your Mazda
Doors and Locks
MX-5_8U35-EA-05F_Edition4 Page102
Thursday, October 6 2005 11:3 AM
Form No.8U35-EA-05F

Black plate (103,1)
Detachable Hardtop (Canada)í
Top latch assemblySide latch assembly
Rear deck latch
Rear deck stud
Rear window defroster coupler
Knowing Your Mazda
Doors and Locks
3-45íSome models.
MX-5_8U35-EA-05F_Edition4 Page103
Thursday, October 6 2005 11:3 AM
Form No.8U35-EA-05F

Black plate (104,1)
qDetachable Hardtop Precautions
WARNING
Standing in a Moving Vehicle:
Standing in the vehicle, or sitting on
the convertible top storage area or
center console when the vehicle is
moving is a dangerous way to ride.
During a sudden maneuver or
collision you could be seriously
injured or even killed.
Sit in the seat with the seat belt on
when the vehicle is moving.
Hardtop and Rollover Accidents:
Rollover accidents on a hardtop
vehicle are dangerous. The hardtop is
not as strong as a regular steel roof.
Rollover accidents could dislodge or
crush the hardtop and cause serious
injuries or even death, just as with no
top or the convertible top.
Always drive safely and observe the
speed limit.
Fastening Mechanisms:
It is dangerous to place your hands or
fingers near the fastening
mechanisms. Your hands or fingers
could be caught and injured by the
mechanism. Always keep your hands
and fingers away from the fastening
mechanisms when moving the
hardtop.
lWhen removing or installing the
hardtop, make sure the operation is
performed by 2 persons.
lBefore removing or installing the
hardtop, be sure you are parked out of
traffic in a flat area near the location
your hardtop is to be stored.
lWhen removing the hardtop, make sure
objects inside the vehicle aren't blown
away by the wind.
lSecure all loose objects inside before
driving with the hardtop removed.
lDon't drive through an automatic car
wash; it may damage the hardtop.
lDon't remove or install the hardtop
when the wind is strong; the wind
could damage the hardtop.
lBefore removing the hardtop, lower the
antenna.
lRemoving the hardtop while it's wet
can cause water to drip into the
passenger compartment.
qRemoving the Detachable Hardtop
1. Park the vehicle on a level surface and
firmly set the parking brake.
2. Lower the side windows, then turn off the ignition.
3. Remove the antenna if it is installed. Refer to Antenna on page 6-10.
3-46
Knowing Your Mazda
Doors and Locks
MX-5_8U35-EA-05F_Edition4 Page104
Thursday, October 6 2005 11:3 AM
Form No.8U35-EA-05F

Black plate (106,1)
11. Disconnect the cord.
12. Slide the hardtop rearward whilepressing down on the rear deck
latches to unlock the latches.
Hardtop
Rear deck latch
13. Lift the hardtop straight off the bodyto prevent damage to the rear deck
latches and studs.
Hardtop
Rear deck stud
14. Set the belt guides and the seats backto their original positions.
15. Disconnect the hardtop rear window defroster coupler (A) from the coupler
(B), and remove the convertible top
rear window defroster coupler (C)
from its holder (D).
(A)
(B)
(C)
(D)
16. Connect the convertible top's rear
window defroster coupler (C) to the
coupler (B).
(C)
(B)
3-48
Knowing Your Mazda
Doors and Locks
MX-5_8U35-EA-05F_Edition4 Page106
Thursday, October 6 2005 11:3 AM
Form No.8U35-EA-05F

Black plate (107,1)
WARNING
Windshield's Edges:
Not being careful of the windshield's
edges when getting into or out of the
vehicle is dangerous. The windshield's
edges could scratch and cause
injuries.
Be careful of the windshield's edges
when getting into or out of the vehicle.
CAUTION
lBe careful not to strike the body with
any of the protruding hardtop
latches.
lUse extreme care when carrying the
hardtop to prevent scratching or
other damage to it.
NOTE
Points to remember when storing the
detachable hardtop.
lDo not place the hardtop on a hard
surface, such as concrete or asphalt.
Place it on a cushioning material,
such as an old blanket.
lBe sure the top and side latches are
locked.
lDo not lean the hardtop against a
wall or stand it in an unstable way.
lStore the hardtop in a dry clean area,
and cover it with a soft material,
such as an old blanket.
qInstalling the Detachable Hardtop
CAUTION
Do not attempt to install the hardtop
with the convertible top also up.
Lower the convertible top before
installing the hardtop, otherwise
damage will occur to the convertible
top.
NOTE
lBe sure to place the convertible top
latches in the locked position.
lMake sure the convertible top is
completely lowered before installing
the hardtop. Also confirm that the
rear window defroster coupler is
disconnected.
1. Park the vehicle on a level surface and firmly set the parking brake.
2. Lower the side windows, then turn off the ignition.
3. Remove the antenna if it is installed. Refer to Antenna on page 6-10.
4. Remove the seat belts from the belt guides.
Belt guide
Knowing Your Mazda
Doors and Locks
3-49
MX-5_8U35-EA-05F_Edition4 Page107
Thursday, October 6 2005 11:3 AM
Form No.8U35-EA-05F

Black plate (108,1)
5. Slide the seats forward.Refer to Seat Slide on page 2-2.
6. Fold the seatbacks forward. Refer to Seat Recline on page 2-3.
7. Connect the rear window defroster coupler.
NOTE
Connect the convertible top's rear
window defroster coupler into the
holder so that it does not rattle.
8. Make sure the top latch and the sidelatches on the hardtop are unlocked.
Top latch
assembly
Side latch
assembly
9. Align the rear deck latches with therear deck studs and set the hardtop
squarely onto the body.
Hardtop
Rear deck stud
3-50
Knowing Your Mazda
Doors and Locks
MX-5_8U35-EA-05F_Edition4 Page108
Thursday, October 6 2005 11:3 AM
Form No.8U35-EA-05F