fuse MAZDA MODEL PROTÉGÉ 2001 Owners Manual (in English)

Knowing Your M^z da
V Auto-opening (Driver's window)
To fully open the window aulomatically,
push rie switch completely down.
To stop the window panway. pull up tbe
switcb and then release it.
I Po$er Windo$ Lock Switch
Vr'ith the lock switch in the unlocked
position. all power windows on each door
with the lock switch in tbe locked
position, only the driver's door power
window can be operated.
Aclurron
To prevent burning out the fuse and
damaging the power wmdow system.
donl open orclose more than lwo
e
A waRlrnrc
Ani te tional Window Operation:
Unintentional windofl operution is
dangerous. A peryon's hands, head,
or neck coud be caught br the
window and.esult in senou: injury,
Unkss a wssenger needs to operate
a h,indo\9, kcep the power ,'indov
lock svilch i the locked position.
3-t2

Driving Your Mazda
oDo
E
When trip meter A is selected, TRIP Awill be displayed. When meler B is
selectred, TRIP B wjll be displayed.
The trip meter records the rolal distance
thevehicle is driven until ihe meter isagain rcset. Retum it ro "0.0" by boldingthe selector depressed for more than Isecond. Use this meter to measure trip
distances and in to compute fuel
V Odom€ter
When this mode is selectred, ODO will bedisplayed-
The odometer recods the rotal distance
fte vehicle has been driven.
V Tfip meter
The trip meier can record rhe total
distance of two trips. One is recorded inarp meter A, and the other is recorded intnp meter B.
For instance, trip meter A can rccord thedistance from ihe point of origin, and rripmeter B can record the dislance fromwhere the fuel tank is filled.
Wlen trip meter A is selected. pressing
the seiector again wi6in one second willchange to trip meierB mode.
NOTE
Only the lrip meters record ienths
of kiloneiers (rniles).
The trip record will be erased
. The power supply is intefiupted(blown fuse orthe baltery is
. The vehicle is driven over 999.9
km (mite).
s-23

Driving Your Mazda
f---]-
/" ** l
i t-
/*orto."frl
3. To advance the hours, press ihe hour
sel button ( H ) to advance the
mjnules, press the minute setbutton( M ) while the time is flashing.
4. Press the clock button again to start
NOTE
lf the power supply to the unit is
intrerrupred (if the fuse blows or fte
vehicle's battery is disconn€cted), the
clock will need 1() be reset.
l_--'---------a-::---| '{.J H I I '{H(a I
lnItl
\,, \,2
f-J.-=frn- T---.El!-frI
NOTE
If the time is not adjusted while the
clock's current time is flashing (if
neilber the H nor M is pressed). and
th€ clockbutton ispressed a second
time, the minut€s will be set to 00. If
fte clock s current time selting is
within the lauer pan of dle hour (from
30 to 59 min). tbe hour se$ing will
automatically advance one hour.
V Changing the display mode
The disptay on the unit can be changed
by pressing the clock bution. This
altemates the dhplay between tirne and
audio. When the clock mode has been
s€lechd, the time will be displayed.
fc.o"*-i
-+-
NOTE
Ifaudio operarion is selected while
tle time mode is on, the selected
audio mode will be displayed for ten
seconds, then the display will revert
5-61

Driving Your Mazda
Choos€ AM by pressing the AM button
and FM by pressing the FM1/2 button.
The selected mode will be indicated.
IfFM stereo is being received, "ST" will
be displayed.
V Tbning
The radio has the following tuning
rnethods: Manual, Seek. Scan, Preset
chann€I, and Auto memory luning.
The easiest way to tune stalions is to set
them on preset channels.
NOTtr
If the power supply is interrupted
(fuse blows or the battery is
disconnected), the presel channelsI Operating the Radio
To operate the radio. tum the ignition
switch to the ACC orON position.
V Radio ON
Press the AM or FM1/2 button io tum th€
NOTD
If the FM broadcast signal becomes
weak, reception automatically
changes from STEREO to MONO for
reduced noise, and the "ST" indicator
will go out.
5-62

Driving Your Mazdt
To tune one jn fie memory, selectAM.
FMl, or FM2 and then press its chann€l
prese! button. The station frequency and
the channel number will be displayed.
NOTE
If the power supply is interrupted
(fuse blows or the battery is
disconnected). the preset channels
Preset cbannel tuning
The six preset channels can be used to
store 6 AM and 12 FM stations.
To set a channel first selecr AM, FMl. or
FM2. Tune to lhe station you want and
depress a channel preset button for about
2 seconds uniil abeep is heard. The
preset channel number and siation
frequenc! will be displayed.
The station is now held in lbe memory.
Repeat this operation for the other
slations and bands you wan110 slore.
5.64
Auto memor! tuning
This is especially useful when driving in
an area wbere the local stalions are not
known- Addiiionat AI4/FM slations can
be stored wirhout dislurbing the
previously set channels.
Press and hold the auto memory buiton
for about 2 seconds until a beep is heard;
the system will automatically scan and
temporarily store the six strongest
stations of each selected band in that
/ HscAN I
II
/,*t"u ft

In Case of an Emergency
B?cause an eheryek !can occw anltine,w.
stMgtt urse lou to becofte JMiliar vith thisse.tid af torr Mnual.]t provides helpfulinlbrution on
hat ta do if the engine
arerheats, if lou have a ||at tite, and t the
You wilt alsolnd out,hat to do iJrou
contont a probleft in the ekctti.ot slsten:and, therc's sone guidance anthe correclral ta tot lour Mada.
Hazmd wamingFlsher 6- 2
Olerbeatin-e 6 2
Emergency Staning 6- 4
Fuses 6- 6
Towing 6-12
Flat Ilrc 6-14
6-1

In Cas€ of an En€.sency
Fuses
I Push-Starting
You can't start a vehicle with an
automatic transaxle by pushing it.
AclurroN
You shouldn't push-start a vehicle
that has a manual transaxle, It can
damage the emission control system,
A wamrnrc
Towinqal?LieklalaalL
Towing a ,ehicle to start it is
dangercus. The vehi.le being towed
couuswsefotwa vrhen its ensine
starts, causinq the t$,o vehictes to
co ide. The occupantt couu be
i jured- Never to*' a I'ehble to staft
x.
Your vehicle's electrical system is
If any lighls, accessories, or controls
don't work, inspect the appropdaie
circuit protector. If a fuse has blown. the
inside element will b€ melted.
tf the sarne fuse blows asain, avoid using
that system and consull an Authorized
Mazda Dealer as soon as possible.
I Fuse Replacement
If the electricai sysrem doesn 1 work, first
inspect fuses on the driver's sid€.
I - Tum off the ignilion switch and other
2. Open the fuse panel.
3. Pull rhe fuse straightoutwith rhe fuse
puller provided on.he fuse panel.
6-6

ln Cas€ ofan Emergency
ffiffi
AcluuoN
Always replace a fuse with one of the
same rating. Otherwise you may
damage the electric system.
.{. lnspect it and replace ifit blown.
5. Push in anew fuse of the same rating,
and make sure it fits tightly. If it
doesn't, have an Authorized Mazda
Dealer insiall it.
If you have no spare fuses, borrow one of
the same rating from a circuit not
essential to vehicle operation. such as the
RADIO c;cuit.
If the headlights or other electrical
componenls don work and lhe iuses in
the cabin are OK. inspect rhe fuse block
under the hood.Ifafuse is blown, il must
be replaced. Follow th€se steps:
1. Tum off the ignition switch and all
2. To remove the fuse btock cover,
unhook it a:rd lift up on tbe side with
dle tab.
6-7

ID Case of an Emergency
€
W
3. Ifa fuse is blown, replace it with a
new one of the srune rating.
When replacing the 100A fuse:
l. Turn off the ignilion switch.
2. Renove the negative baatery terminal.
3. Remove nuts A and B.
zl. Lift fte fuse block and remove the C
bolts-
5. Replace the fuse with a new one of the
same mting.
6. Install in the reverse order of removal.
6.8

In Case of an Emergency
I Fuse Panel DescriDtion
tr88
E80
HBE
HEE
HEE
F'H
EE
E
V Fuse block (Engin€ compartment)
DESCRIPTIONFUSDRA1.INGPROTECIED COMPONDNT
HEATER
2(ABS)For pmrection of vanons ci(uirs*
lIC KEYlor pole.lio of veious cimiB
5(CLOw)
6
COOLINC30A
BTNInlerior lights, Power dooi lock+
9Addrtronrl rool,ng lan for r'r rondirion.r'
INJORFIP
(r'JC)
(sTsrc)
HORN
TAIL
(HEADC U)Foi piote.rion of vfjos c;cuits
(FOC)For protecion of vdious cncuns
'sune nodek. 6-9