stop start MAZDA MODEL PROTÉGÉ 2001 Owners Manual (in English)

Kno*ing Your Mazda
Steering Wheel
I Tilt Whe€l
To change the angle of tbe steering
wheel. stop the vehicle, pull the tili wheel
release lever under the steering column
down, adjus! lhe wheel. lhen push the
release lever up to lock the column.
Afler adjusting. pusb tbe whe€l up and
down to be certain it's locked before
driving.
AcaurroN
Alivays use only a designated Mazda
fuel cap or an approved equivaleni.
available a! Authorized Mazda
Dealers. The wrong cap can result in a
serious malfunction of the tuel and
emission control systems.It may also
cause the checkengine lighi in the
instrument cluster to illuminate.
Aw,qnvruc
Adjusting the Steefins Wheel:
Adjustinq the steeing wheel $,hile
the whitle is moving is dtngercus.
Mot'ing it can wrr easib cause the
diyer to abnptlr tur,t to the left or
right. This can lead to loss of untlot
or an accident. Newr adjust the
steenng *heel white the vehicle is
Ac.qurroN
Make sure the fuel-filler cap is
tightened securely. The check engine
light cones on when the cap isn't
tightened securely. If the light rernains
on (even after you have tightened the
cap securely, driven, and restarted the
engine several timet. it may indjcate
a different problem. Conlact an
Auftorized Mazda Dealer as soon as
possible.
3-20

Protecting Your Mrzdg
Before Driving
I Belore Getting In
. Be sure the windows, outside
mirror(s), and outside lights a.re clean.
. Inspect inllation pressures and
condition of tires-
. Look under the vebicle for any sign of
. If you plan to back up, make sure
nothing will be in your way.
I After Getting In
. Are all doors closed and locked?
. Are tbe inside and outside mirors
adj'rsGd?
. Is everyone seat belt faslened?
. Do all the lights work?
. Check all gauges.
. Check all waming lights when the
ignition switch is lumed 1() the ON
posirion.
. Release ihe parking brake and make
sure the brate waming lighlgoes off
Always be lhoroughly f:rmiliar with your
Mazda.
Break-In Period
No special break-in is necessary, but a
few precautions in the firs! 1,000 km
(600 miles) may add to the peformance.
economy, and life of your Mazda.
. Don'trace the engine.
. Don't maintain one consiantspeed for
long.
. Donl drive constantly at full th.ottle
or high engine rpm for exlended
. Avoid unnecessary hard stops.
. Avoid full throule starts.
NOTE
Engine oil, engine coolanl,
brake/clutch fluid, washer fluid. and
other fluid levels shouldbe inspected
daily, weekly, or at refueling,
dependjng on the fluid. See
Maintenance, Section 8.
4-6

Driving Your Mazda
Manual Transaxle 0peration
NOTE
Whethercold or warm, the engine
should be staned witlout use of the
If the engine fails to start, it may be
flooded (excessive fuel in the engine).
Follow this procedure:
I - Depress the accelerator all the way
and hold it there.
2. Tum the ignition switch to the STARTposition and hold iithere forupto
l0 seconds. If the engine starts, release
lhe key and accelerator immediacly
because the engine will suddenly rev
up.
3. Ifthe engine fails to start, crank it
without using ihe accelerator-for up
I Manual Transa\le Shift Pattern
The shift pattem of the iransa{le is
conventional, as shown,
Press the clutch pedal all the way down
while sbifting; then release il slowly.
A safely feature prevents accidentai
shifling from 5 to R. The shifi lever must
be pu! in neulral before being shifted to
R,
135
FfrI
?/4 e
NOTE
. Make sure the vehicle is stopped
befoie shiiting to R.
. If shiftinC into reverse is difficult.
shift into neutral, release the clutchp€dal, and try again.
AcaurroN
Keep your foot off the clutcb pedal
except wben shifting gears. Also,
donl use the clutcb ro hold the
vehicle on an upgrade. This will avoid
needless clutch wear and damage.
5-!

Driving Your Mazdr
Power Steering
Power steering is only operable when the
engine is running. If the engine is off or
if the power steering system is
inoperable. you can still sieet but it
requires more physical effort.
If ihe steering feels rigid during normal
driving, consuli an Authorized Mazda
Dealer.
NOTI
w}len lhe engine is jump-started, an
unevenness of rpm occurs and the
ABS warning light comes on. This is
due to a lack of baltery capaciry and
doesn't indicaie a malfunction.
Have the battery recharged as soon as
possible.
NOTf,
If the ABS waming light stats on
wbile you're driving. the ABS
conlrol unithas detecled a system
malfunction. If ftis occurs, your
brakes will function normally as if
$e vehicle hadno ABS. Should
tbis happen, consull an Authorized
Mazda Dealer as soon as possible.
Braking distances may b€ longer
on loos€ surfaces (snow or gravel.
for example) which usually have a
haJd foundation. A vehicle with a
normal braking sysl,em may require
less dislance to stop under these
conditions because the tires will
build up a wedge of surface layer
when the wheels skid.
Awl^nNmc
4rg
The ABS canrct conpensate forunsafe and .eckless driving,
excessn e speed, .^itgati s (fottor)ins
a othe. whicle tooclosel!),a d
htdroplrnins (rcduced tire ftictionand rcad contact because of watet on
the rcad surface). You can sn have
a acdden . So don't relr o ABSas
a substitutefor safe dni g.AcaurroN
Never hold the steering wheel to the
extreme left or right for more than
five s€conds widr the engine runnine.
This could damage th€ power steeing
5.r4

Drit ing Your Mazda
Warning LightVBeeps
I Warning Lights Inspection
Inspect lhe waming lights by turning the
ignilion switch !o the ON position with
th€ engine offand the parking brake on.
Consult an Authorized Mazda Dealer
about any light thai doesn't come on.
If the brake system waming light is off
when dre ignition switch is in the START
position, have the system inspectedby an
Authorized Mazda Dealer
After starting the engine, make sure all
warning lights are off.Ifone stays on. it's
signaling for attenlion.
The brake syslem waming lighr sbould
go off when the parking brake is released.
I Brak€ System Wsming
Light
Low brake fluid level warning
You may notice that ihe pedal is harder to
push or tlat it may go closer to the floor.
Ineirher case, jt will take longer to stop
the vehicle.
l. With the engine stopped. check the
brake fluid level immediately and add
fluid as required (page 8 23).
2. After adding fluid, check the light
again.
Ifthe waming light remains on, or if
the brakes do not operate properly, do
not drive the vehicle. Have it towed to
an Authorized Mazda Dealer.
Even ifihe light goes off, have your
brake system inspected as soon as
possibte.
This waming lightcomes on when the
ignition switch is tumed to the ON
position. Wlen the parking brake is not
applied. itgoes out after about2 seconds.
This waming has the following functions:
V Parking brak€ warning
The light cones on when the parking
brake is applied with fte ignition switch
in the START orON position.Ilgoes off
when $e parking brake is fully released.
V Low brake fluid level
warning/Elect.onic b.ake force
distribution system warning
lf the light stays on after the parking
brake is fully released, you may have a
Drive to $e side of the road and park off
the right of way.
5-26

Driving Your Mazda
t-;-l
?"'
til;l
-fi
V Playing
Press the casselc tape play button to
staltplaying when a cassette tape is in
the unit.Ifthere isn't a cassette tape in
$e unit wben lhe cassette tape play
button is pressed. "NO TAPE'will flash
on and off in sequence.
V Dolby noise reduction
When using a tape with Dolby NR+,push
the D0 button. The DO symbol will be
displayed. To play a tape without Dolby
NR, push the bulton once again.
* Noise reduction system manLrfactured
under license fiom Dolby Laboratories
Licensing Corporation.
Dolby and the double D syrnbol DO
are trademarks of Dolby Laboratories
Licens jng Corporation.
V Fast forward/Rewind
Press lhe fast forward button 1<)
fast-forward.
Press rhe rewind button to rewind.
To stop this operation and play ihe
cassetie tape, press the button again.
NOTE
Vften the cassette tap€ ends during
fa$ forward or rewind, it
autonatically stops and starts playing.
5-66