display MAZDA MODEL RX 8 2004 Quick Tips (in English)

DRIVER’S VIEW
1. Power window switches,
see Switches/Locks
2. Power door locks,
see Switches/Locks
3. Dual power mirrors,
see Switches/Locks
4. Instrument panel
lighting,see Getting Started
5. Turn signal/lighting control
lever, see Driver Controls
6. Air vents
7. Traction Control
System*,see Getting Started
8. Audio control switches*,
see Driver Controls
9. Tire pressure monitoring
system,see Getting Started
10. Horn/Air bag
11. Cruise control,
see Driver Controls
12. Wiper/washer control
lever, see Driver Controls
DSC
13. Clock, see Audio Systems
14. Information display,
see Owner’s Manual
15. Hazard warning
switch, Press on/off
16. NAVI system*
System is used to locate
street addresses, points of
interest or cross streets: see your
Owner’s Manual for additional
operating information
17. Ambient temperature
display
18. Audio system,
see Audio Systems
19. Climate control panel,
see Climate Controls
20. Gearshift lever (A/T)*,
see Transmission
21. Parking brake lever,
see Console/Transmission
22. Cup holder
23. Accessory socket24. Console,
see Console/Transmission
25. Seat warmer*,
see Console/Transmission
26. Steering paddle
switches (A/T only)*,
see Transmission
27. Tilt steering-wheel lever,
see Driver Controls
28. Storage
29. Hood release handle
30. Remote trunk-lid
release
Push to open trunk; main
switch in glove box must be ON
Remote trunk-lid release
lock-out, see Trunk
31. Power window lock switch
32. Remote fuel-door release
Use unleaded gasoline,
91-octane only
Driver’s
View
Quick Tips 2004 Mazda Mazda RX-8 page 2
page 3
Getting Started
RX-8 Quick Tips®are designed
to quickly familiarize you with
some important features of
your RX-8
This Driver’s View tab is your
index to the Quick Tips
®, locate
the item you would like to
learn more about and then
turn to the listed tab
Be sure to see the tab called
Getting Started, this section
contains important operating
tips about your RX-8
Items identified with a Rotary
Engine symbol call out
important information
27
H C
F
EHP
R
N
D
MC4
0 1 2 3 5678
910
6 5 4 3 2 1RPTPROG
RDM
DISC DISC SEEK
TRACK
APCSETDISP AMB
LOADCLK AM CD
VOLTAPE/MD FM 1/2SCANTEXT/AUDIO CONT TUNE/AUTO-MPUSH POWER
A/C01
2
34MODE
MODEVO
LON
OFF
SET
ACCEL
CANCELSET
COAST
2826262930
31
3109811567214
1817
20
32
21
19
25
2422
23
15121416136
*Denotes optional equipment
Always check the Owner’s Manual for more operating information and safety features

GETTING STARTED
Always check the Owner’s Manual for more operating information and safety features
Getting
Started
Getting
Started
Quick Tips 2004 Mazda Mazda RX-8 page 4
page 5
Instant Mobility System
emergency flat tire
repair kit (IMS)
Temporary spare tire is not
equipped with your Mazda, if
tire repair is required, repair tire
with emergency flat tire repair
kit, see Owner’s Manual
If a temporary spare tire is
required, consult your
Authorized Mazda Dealer
Tire pressure
monitoring system
Warning light illuminates for a
few seconds when ignition is on
If tire pressure is too high or low,
or tire temperature is too high
warning light will illuminate
Short trip driving procedure
Any trip that is too short for the
engine to reach normal operating
temperature; needle in middle
of temperature gauge indicates
normal temperature
The following procedure should
be followed when moving vehicle
a short distance**:
1. Start engine
2. Move vehicle
3. Warm engine for 5-minutes
at idle
4. Raise engine speed to 3000
RPM for 10-seconds
5. Return to idle
6. Turn off engine
Tip: Warming up engine
improves engine life
Traction Control
System (TCS)*/Dynamic
Stability Control (DSC)*
DSC light may occasionally flash
while driving, this indicates
that the DSC was performing a
correction to help maintain your
best vehicle control, if DSC light
remains on, see your Mazda Dealer
If DSC light remains on after
disconnecting battery or jump-
starting, you will need to perform
a Steering Angle Sensor calibration
procedure, after battery power is
restored: Ignition ON; turn steering
wheel to full left lock position;
then full right lock position; turn
ignition OFF, then ONTips: Close rear door first,
then front door; damage may
occur otherwise
To prevent alarm arming with
passenger inside vehicle, driver
must manually lock door by
pressing lock knob
RX-8 rotary engine
precautions
Check engine oil level when refueling
Rotary engine design uses an oil
injection system in addition to
lubrication of internal parts
It is important to maintain
proper oil level
Engine oil level
warning light
Indicates low engine oil if
illuminated; pull over to a safe
location; turn engine off and
check engine oil level when
engine is cool, add engine
oil if necessary
Instrument panel
lighting
With headlights on:
To brighten/dim turn thumbwheel
up/down
Maximum illumination:
Rotate thumbwheel upward
until click is heard; instrument
cluster and information display
illumination color goes from
red to white
Headlights/parking lights OFF:
Instrument panel lighting defaults
to maximum brightness
Headlights/parking lights ON:
Illumination changes brightness
with dimmer switch adjustment Rear doors
For a rear occupant to exit with
a front passenger:
1. Front occupant must release
seatbelt
2. Front occupant must open door
3. Open rear door
For a rear occupant to exit without
a front occupant:
1. Release front seat to forward
position
2. Unlock and open front door
3. Open rear door
*Denotes optional equipment
**Moving vehicle at a car wash or moving
vehicle to access another vehicle would
be considered a short distance

INSTRUMENT CLUSTER
Always check the Owner’s Manual for more operating information and safety features
Instrument
Cluster
Instrument
Cluster
Quick Tips 2004 Mazda Mazda RX-8 page 6
page 7
H C
F
EHP
R
N
D
MLOIL-P
4
0 1 2 3 5678
9
10
x1000r/min
TRIPAO.O8
1
21103645789
• Power steering
malfunction
Dealer inspection required
if light remains on
• Air bag readiness
Front, side and curtain air bag
malfunction; warning light
constantly flashes or stays on
or never comes on with ignition
on, dealer inspection required
• Door ajar
• Always fasten
safety belts
• Low washer fluid level*
• Engine coolant level
• Headlight auto
leveling malfunction
9. Engine oil pressure gauge,
Indicates normal engine oil
pressure when needle is
halfway between L and H
with engine running
10. Manual mode gear
indicator (A/T only)*
Displays current gear of Sport AT
during manual shift mode
• Lights on
Traction Control
System (TCS)*/Dynamic
Stability Control (DSC)*,
see Getting Started
• Traction Control
System* off,
System turned off manually
• Cruise control main
power on, see Driver Controls
• Brake system
Parking brake on/low fluid level
• Check engine
Dealer inspection required
• Immobilizer system,
see Locks
Engine oil level
warning light,
see Getting Started
CRUISE
MAIN
DSC
6. Speedometer
7. Odometer/trip odometer
selector
Press to select among trip A,
trip B, and odometer
Press and hold to reset
selected trip meter
8. Odometer/trip odometer
WARNING LIGHTS
• Low fuel
• Turn signals/hazard
warning on
• Anti-lock Brake
System (ABS)*
ABS malfunction, normal brakes
only, dealer inspection required
• Cruise set,
see Driver Controls
• Automatic transaxle
indicator
Dealer inspection required
if light remains on
• High beams on
• Charging system
warning light
Dealer inspection required
Tire pressure
monitoring system,
see Getting Started
GAUGES
1. Fuel gauge
2. Engine coolant
temperature gauge
If above normal range, stop
vehicle and turn off engine,
check coolant level when safe
3. Speed unit selector
Select km/h or mph
4. Tachometer
5. Engine over-rev
warning buzzer
The rotary engine design
allows RPM ranges of up to
7000 RPM (A/T) and 9000
RPM (M/T), if you exceed a
given RPM, a warning buzzer
will remind you to up-shift
to the next higher gear
Always obey all local speed
limits and traffic signs
*Denotes optional equipment

AM/FM STEREO/CASSETTE/CD
Always check the Owner’s Manual for more operating information and safety features
Audio
Systems
Audio
Systems
Quick Tips 2004 Mazda Mazda RX-8 page 20
page 21
6. SEEK/TRACK/APC
Radio: Press to
automatically seek higher/
lower frequency
CD: Press to select
next/previous track
Tape: Press to
automatically advance tape to
beginning of next selection/
replay selection; to stop this
operation, press button again
7. LOAD*
To load multiple discs: Press
and hold LOAD (7) until
beep is heard; insert CD
when “In” is displayed
To eject disc: Press Eject (14)
To eject specific disc: Press and
hold Eject (14) until beep is
heard; within five seconds
press the desired tray
number 1-6 (15)
/
/
/
1. Power/Volume
Press to turn on/off; rotate
to increase/decrease volume
Tip: Press (8) and (9)
together to turn radio on
2. Repeat
Press to replay current CD/
tape selection
3. Disc up
†
Press to skip forward to
beginning of next CD
4. Disc down
†
Press to skip back to beginning
of previous CD
5. Tune/Auto-Memory
Tune: Rotate counterclockwise/
clockwise for lower frequency/
higher frequency
Radio: Press and hold until a
beep is heard; system auto-
maticallyscans and temporarily
stores six strong stations in each
band; press again to cancel
11. CD
Press to play CD
12. Tape*/MD*
Press to play Mini-disc Player/
cassette tape
13. DISP*
Press: Changes display during
MD play
14. CD eject button
15. Memory preset buttons
To set: Tune to station, press
and hold until beep is heard
16. Mini Disc slot*
17. Eject button*
18. Cassette door*
19. Dolby® Noise Reduction*
Reduces tape noise and hiss;
press to activate/deactivate
20. Scan
Press to briefly sample next
listenable selections; functions
in all modes 8. FM1/2
Press to select between FM1/FM2
station preset buttons (15)
9. AM
Press to select AM frequency band
10. CD slot
Tip: Automatic Level
Control (ALC) automatically
adjusts audio volume/quality
depending on vehicle speed
22. Fast forward
Press to fast forward through
a track
23. Reverse
Press to reverse through a track
24. Program Random
†Press to enable/cancel
Clock
To set: With ignition in ACC or ON
position, press (B) and hold until
beep sounds; 12 hr/24 hr will be
displayed; press (A) to select; press
(B) again while selection is flashing:
Hr ADJUST displays; press (A) to
select hr; press (B) when done,
do the same to set minutes
21. Text/Audio Control
Audio control: Press to select
BASS/MID/TREBLE/FADE/
BALANCE/BEEP ON/ALC OFF/
ALC LEVEL 1, 2, 3/AUDIO PLT
ON**; rotate right/left to
adjust selected feature
*Denotes optional equipment
**Bose audio system only
†For use with cassette tape player,
MD player, or CD changer*
171918
6 5 4 3 2 1RPTPROG
RDM
DISC DISC SEEK
TRACK
APC
SETDISP AMB
LOADCLK AM CD
VOLTAPE/MD FM 1/2
SCAN
TEXT/AUDIO CONT TUNE/AUTO-MPUSH
POWER
1312891011
BA714
521
MINI DISC
1617
6
15
4222332241
20