reset MAZDA MODEL RX 8 2004 Quick Tips (in English)
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2004, Model line: MODEL RX 8, Model: MAZDA MODEL RX 8 2004Pages: 12, PDF Size: 0.99 MB
Page 4 of 12

INSTRUMENT CLUSTER
Always check the Owner’s Manual for more operating information and safety features
Instrument
Cluster
Instrument
Cluster
Quick Tips 2004 Mazda Mazda RX-8 page 6
page 7
H C
F
EHP
R
N
D
MLOIL-P
4
0 1 2 3 5678
9
10
x1000r/min
TRIPAO.O8
1
21103645789
• Power steering
malfunction
Dealer inspection required
if light remains on
• Air bag readiness
Front, side and curtain air bag
malfunction; warning light
constantly flashes or stays on
or never comes on with ignition
on, dealer inspection required
• Door ajar
• Always fasten
safety belts
• Low washer fluid level*
• Engine coolant level
• Headlight auto
leveling malfunction
9. Engine oil pressure gauge,
Indicates normal engine oil
pressure when needle is
halfway between L and H
with engine running
10. Manual mode gear
indicator (A/T only)*
Displays current gear of Sport AT
during manual shift mode
• Lights on
Traction Control
System (TCS)*/Dynamic
Stability Control (DSC)*,
see Getting Started
• Traction Control
System* off,
System turned off manually
• Cruise control main
power on, see Driver Controls
• Brake system
Parking brake on/low fluid level
• Check engine
Dealer inspection required
• Immobilizer system,
see Locks
Engine oil level
warning light,
see Getting Started
CRUISE
MAIN
DSC
6. Speedometer
7. Odometer/trip odometer
selector
Press to select among trip A,
trip B, and odometer
Press and hold to reset
selected trip meter
8. Odometer/trip odometer
WARNING LIGHTS
• Low fuel
• Turn signals/hazard
warning on
• Anti-lock Brake
System (ABS)*
ABS malfunction, normal brakes
only, dealer inspection required
• Cruise set,
see Driver Controls
• Automatic transaxle
indicator
Dealer inspection required
if light remains on
• High beams on
• Charging system
warning light
Dealer inspection required
Tire pressure
monitoring system,
see Getting Started
GAUGES
1. Fuel gauge
2. Engine coolant
temperature gauge
If above normal range, stop
vehicle and turn off engine,
check coolant level when safe
3. Speed unit selector
Select km/h or mph
4. Tachometer
5. Engine over-rev
warning buzzer
The rotary engine design
allows RPM ranges of up to
7000 RPM (A/T) and 9000
RPM (M/T), if you exceed a
given RPM, a warning buzzer
will remind you to up-shift
to the next higher gear
Always obey all local speed
limits and traffic signs
*Denotes optional equipment
Page 5 of 12

DRIVER CONTROLS
Always check the Owner’s Manual for more operating information and safety features
Driver
Controls
Driver
Controls
Quick Tips 2004 Mazda Mazda RX-8 page 8
page 9
12
3
Wiper/washer
control lever
Intermittent wiper:
One click down
To change interval speed:
Rotate inner ring (
3)
Normal wiper speed: Two
clicks downTurn signal/lighting
control lever
OFF= Lights off
= Tail, parking and
dashboard lights on: Rotate
knob (1) to first notch
= Tail, parking, dashboard
and headlights on: Rotate
knob (1) to second notch
High beams on/off: Push forward/
pull back to detent
To flash high beams: Pull back
slightly and release
Turn signals right/left: move
lever up/down
= Fog lights on: Rotate (2);
functions only with headlight
low beams on
Tip: Headlights switch off,
parking lights remain on, if
lights are left on and switch is
in lock position or key removed
Fast wiper speed: Three
clicks down
Single wipe: Push stalk up
Washer: Pull stalk back
ON
OFF
SET
ACCEL
CANCEL
SET
COAST
43
12
M
O
D
EVOL
587
6Steering-wheel audio controls
To increase/decrease volume:
Press (5)
Radio: Press (6) to select preset
stations
Cassette/CD/MD: Press (6) to
select next selection/track
Press (7) to select AM, FM 1,
FM 2, Tape, CD and MD mode
Press (8) to mute Cruise control
Operates above 25 mph
To activate: Press and release
ON/OFF (1)
To set speed: Press and release
SET/COAST (3) at desired speed
To accelerate: Press and hold
RESUME/ACCEL (2); incremental
acceleration: Press and release (2),
each tap = plus 1mph
To decelerate: Press and hold
SET/COAST (3), release at desiredspeed; or tap brake pedal,
press and release (3) at
desired speed; incremental
deceleration: Press and release
(3), each tap = minus 1 mph
To cancel: Tap brake pedal, clutch
pedal (manual transaxle) or press
CANCEL button (4) or ON/OFF (1)
Return to preset speed after CANCEL
button or braking: Press and
release RESUME/ACCEL button (2)
Tilt steering-wheel lever
Pull lever located under steering-
wheel down to unlock column,
position tilt angle steering
column position
WARNING: Do not adjust
steering-wheel while driving,
you can lose control of vehicle
*Denotes optional equipment
Page 11 of 12

AM/FM STEREO/CASSETTE/CD
Always check the Owner’s Manual for more operating information and safety features
Audio
Systems
Audio
Systems
Quick Tips 2004 Mazda Mazda RX-8 page 20
page 21
6. SEEK/TRACK/APC
Radio: Press to
automatically seek higher/
lower frequency
CD: Press to select
next/previous track
Tape: Press to
automatically advance tape to
beginning of next selection/
replay selection; to stop this
operation, press button again
7. LOAD*
To load multiple discs: Press
and hold LOAD (7) until
beep is heard; insert CD
when “In” is displayed
To eject disc: Press Eject (14)
To eject specific disc: Press and
hold Eject (14) until beep is
heard; within five seconds
press the desired tray
number 1-6 (15)
/
/
/
1. Power/Volume
Press to turn on/off; rotate
to increase/decrease volume
Tip: Press (8) and (9)
together to turn radio on
2. Repeat
Press to replay current CD/
tape selection
3. Disc up
†
Press to skip forward to
beginning of next CD
4. Disc down
†
Press to skip back to beginning
of previous CD
5. Tune/Auto-Memory
Tune: Rotate counterclockwise/
clockwise for lower frequency/
higher frequency
Radio: Press and hold until a
beep is heard; system auto-
maticallyscans and temporarily
stores six strong stations in each
band; press again to cancel
11. CD
Press to play CD
12. Tape*/MD*
Press to play Mini-disc Player/
cassette tape
13. DISP*
Press: Changes display during
MD play
14. CD eject button
15. Memory preset buttons
To set: Tune to station, press
and hold until beep is heard
16. Mini Disc slot*
17. Eject button*
18. Cassette door*
19. Dolby® Noise Reduction*
Reduces tape noise and hiss;
press to activate/deactivate
20. Scan
Press to briefly sample next
listenable selections; functions
in all modes 8. FM1/2
Press to select between FM1/FM2
station preset buttons (15)
9. AM
Press to select AM frequency band
10. CD slot
Tip: Automatic Level
Control (ALC) automatically
adjusts audio volume/quality
depending on vehicle speed
22. Fast forward
Press to fast forward through
a track
23. Reverse
Press to reverse through a track
24. Program Random
†Press to enable/cancel
Clock
To set: With ignition in ACC or ON
position, press (B) and hold until
beep sounds; 12 hr/24 hr will be
displayed; press (A) to select; press
(B) again while selection is flashing:
Hr ADJUST displays; press (A) to
select hr; press (B) when done,
do the same to set minutes
21. Text/Audio Control
Audio control: Press to select
BASS/MID/TREBLE/FADE/
BALANCE/BEEP ON/ALC OFF/
ALC LEVEL 1, 2, 3/AUDIO PLT
ON**; rotate right/left to
adjust selected feature
*Denotes optional equipment
**Bose audio system only
†For use with cassette tape player,
MD player, or CD changer*
171918
6 5 4 3 2 1RPTPROG
RDM
DISC DISC SEEK
TRACK
APC
SETDISP AMB
LOADCLK AM CD
VOLTAPE/MD FM 1/2
SCAN
TEXT/AUDIO CONT TUNE/AUTO-MPUSH
POWER
1312891011
BA714
521
MINI DISC
1617
6
15
4222332241
20