warning MAZDA MODEL RX 8 2004 Quick Tips (in English)

DRIVER’S VIEW
1. Power window switches,
see Switches/Locks
2. Power door locks,
see Switches/Locks
3. Dual power mirrors,
see Switches/Locks
4. Instrument panel
lighting,see Getting Started
5. Turn signal/lighting control
lever, see Driver Controls
6. Air vents
7. Traction Control
System*,see Getting Started
8. Audio control switches*,
see Driver Controls
9. Tire pressure monitoring
system,see Getting Started
10. Horn/Air bag
11. Cruise control,
see Driver Controls
12. Wiper/washer control
lever, see Driver Controls
DSC
13. Clock, see Audio Systems
14. Information display,
see Owner’s Manual
15. Hazard warning
switch, Press on/off
16. NAVI system*
System is used to locate
street addresses, points of
interest or cross streets: see your
Owner’s Manual for additional
operating information
17. Ambient temperature
display
18. Audio system,
see Audio Systems
19. Climate control panel,
see Climate Controls
20. Gearshift lever (A/T)*,
see Transmission
21. Parking brake lever,
see Console/Transmission
22. Cup holder
23. Accessory socket24. Console,
see Console/Transmission
25. Seat warmer*,
see Console/Transmission
26. Steering paddle
switches (A/T only)*,
see Transmission
27. Tilt steering-wheel lever,
see Driver Controls
28. Storage
29. Hood release handle
30. Remote trunk-lid
release
Push to open trunk; main
switch in glove box must be ON
Remote trunk-lid release
lock-out, see Trunk
31. Power window lock switch
32. Remote fuel-door release
Use unleaded gasoline,
91-octane only
Driver’s
View
Quick Tips 2004 Mazda Mazda RX-8 page 2
page 3
Getting Started
RX-8 Quick Tips®are designed
to quickly familiarize you with
some important features of
your RX-8
This Driver’s View tab is your
index to the Quick Tips
®, locate
the item you would like to
learn more about and then
turn to the listed tab
Be sure to see the tab called
Getting Started, this section
contains important operating
tips about your RX-8
Items identified with a Rotary
Engine symbol call out
important information
27
H C
F
EHP
R
N
D
MC4
0 1 2 3 5678
910
6 5 4 3 2 1RPTPROG
RDM
DISC DISC SEEK
TRACK
APCSETDISP AMB
LOADCLK AM CD
VOLTAPE/MD FM 1/2SCANTEXT/AUDIO CONT TUNE/AUTO-MPUSH POWER
A/C01
2
34MODE
MODEVO
LON
OFF
SET
ACCEL
CANCELSET
COAST
2826262930
31
3109811567214
1817
20
32
21
19
25
2422
23
15121416136
*Denotes optional equipment
Always check the Owner’s Manual for more operating information and safety features

GETTING STARTED
Always check the Owner’s Manual for more operating information and safety features
Getting
Started
Getting
Started
Quick Tips 2004 Mazda Mazda RX-8 page 4
page 5
Instant Mobility System
emergency flat tire
repair kit (IMS)
Temporary spare tire is not
equipped with your Mazda, if
tire repair is required, repair tire
with emergency flat tire repair
kit, see Owner’s Manual
If a temporary spare tire is
required, consult your
Authorized Mazda Dealer
Tire pressure
monitoring system
Warning light illuminates for a
few seconds when ignition is on
If tire pressure is too high or low,
or tire temperature is too high
warning light will illuminate
Short trip driving procedure
Any trip that is too short for the
engine to reach normal operating
temperature; needle in middle
of temperature gauge indicates
normal temperature
The following procedure should
be followed when moving vehicle
a short distance**:
1. Start engine
2. Move vehicle
3. Warm engine for 5-minutes
at idle
4. Raise engine speed to 3000
RPM for 10-seconds
5. Return to idle
6. Turn off engine
Tip: Warming up engine
improves engine life
Traction Control
System (TCS)*/Dynamic
Stability Control (DSC)*
DSC light may occasionally flash
while driving, this indicates
that the DSC was performing a
correction to help maintain your
best vehicle control, if DSC light
remains on, see your Mazda Dealer
If DSC light remains on after
disconnecting battery or jump-
starting, you will need to perform
a Steering Angle Sensor calibration
procedure, after battery power is
restored: Ignition ON; turn steering
wheel to full left lock position;
then full right lock position; turn
ignition OFF, then ONTips: Close rear door first,
then front door; damage may
occur otherwise
To prevent alarm arming with
passenger inside vehicle, driver
must manually lock door by
pressing lock knob
RX-8 rotary engine
precautions
Check engine oil level when refueling
Rotary engine design uses an oil
injection system in addition to
lubrication of internal parts
It is important to maintain
proper oil level
Engine oil level
warning light
Indicates low engine oil if
illuminated; pull over to a safe
location; turn engine off and
check engine oil level when
engine is cool, add engine
oil if necessary
Instrument panel
lighting
With headlights on:
To brighten/dim turn thumbwheel
up/down
Maximum illumination:
Rotate thumbwheel upward
until click is heard; instrument
cluster and information display
illumination color goes from
red to white
Headlights/parking lights OFF:
Instrument panel lighting defaults
to maximum brightness
Headlights/parking lights ON:
Illumination changes brightness
with dimmer switch adjustment Rear doors
For a rear occupant to exit with
a front passenger:
1. Front occupant must release
seatbelt
2. Front occupant must open door
3. Open rear door
For a rear occupant to exit without
a front occupant:
1. Release front seat to forward
position
2. Unlock and open front door
3. Open rear door
*Denotes optional equipment
**Moving vehicle at a car wash or moving
vehicle to access another vehicle would
be considered a short distance

INSTRUMENT CLUSTER
Always check the Owner’s Manual for more operating information and safety features
Instrument
Cluster
Instrument
Cluster
Quick Tips 2004 Mazda Mazda RX-8 page 6
page 7
H C
F
EHP
R
N
D
MLOIL-P
4
0 1 2 3 5678
9
10
x1000r/min
TRIPAO.O8
1
21103645789
• Power steering
malfunction
Dealer inspection required
if light remains on
• Air bag readiness
Front, side and curtain air bag
malfunction; warning light
constantly flashes or stays on
or never comes on with ignition
on, dealer inspection required
• Door ajar
• Always fasten
safety belts
• Low washer fluid level*
• Engine coolant level
• Headlight auto
leveling malfunction
9. Engine oil pressure gauge,
Indicates normal engine oil
pressure when needle is
halfway between L and H
with engine running
10. Manual mode gear
indicator (A/T only)*
Displays current gear of Sport AT
during manual shift mode
• Lights on
Traction Control
System (TCS)*/Dynamic
Stability Control (DSC)*,
see Getting Started
• Traction Control
System* off,
System turned off manually
• Cruise control main
power on, see Driver Controls
• Brake system
Parking brake on/low fluid level
• Check engine
Dealer inspection required
• Immobilizer system,
see Locks
Engine oil level
warning light,
see Getting Started
CRUISE
MAIN
DSC
6. Speedometer
7. Odometer/trip odometer
selector
Press to select among trip A,
trip B, and odometer
Press and hold to reset
selected trip meter
8. Odometer/trip odometer
WARNING LIGHTS
• Low fuel
• Turn signals/hazard
warning on
• Anti-lock Brake
System (ABS)*
ABS malfunction, normal brakes
only, dealer inspection required
• Cruise set,
see Driver Controls
• Automatic transaxle
indicator
Dealer inspection required
if light remains on
• High beams on
• Charging system
warning light
Dealer inspection required
Tire pressure
monitoring system,
see Getting Started
GAUGES
1. Fuel gauge
2. Engine coolant
temperature gauge
If above normal range, stop
vehicle and turn off engine,
check coolant level when safe
3. Speed unit selector
Select km/h or mph
4. Tachometer
5. Engine over-rev
warning buzzer
The rotary engine design
allows RPM ranges of up to
7000 RPM (A/T) and 9000
RPM (M/T), if you exceed a
given RPM, a warning buzzer
will remind you to up-shift
to the next higher gear
Always obey all local speed
limits and traffic signs
*Denotes optional equipment

DRIVER CONTROLS
Always check the Owner’s Manual for more operating information and safety features
Driver
Controls
Driver
Controls
Quick Tips 2004 Mazda Mazda RX-8 page 8
page 9
12
3
Wiper/washer
control lever
Intermittent wiper:
One click down
To change interval speed:
Rotate inner ring (
3)
Normal wiper speed: Two
clicks downTurn signal/lighting
control lever
OFF= Lights off
= Tail, parking and
dashboard lights on: Rotate
knob (1) to first notch
= Tail, parking, dashboard
and headlights on: Rotate
knob (1) to second notch
High beams on/off: Push forward/
pull back to detent
To flash high beams: Pull back
slightly and release
Turn signals right/left: move
lever up/down
= Fog lights on: Rotate (2);
functions only with headlight
low beams on
Tip: Headlights switch off,
parking lights remain on, if
lights are left on and switch is
in lock position or key removed
Fast wiper speed: Three
clicks down
Single wipe: Push stalk up
Washer: Pull stalk back
ON
OFF
SET
ACCEL
CANCEL
SET
COAST
43
12
M
O
D
EVOL
587
6Steering-wheel audio controls
To increase/decrease volume:
Press (5)
Radio: Press (6) to select preset
stations
Cassette/CD/MD: Press (6) to
select next selection/track
Press (7) to select AM, FM 1,
FM 2, Tape, CD and MD mode
Press (8) to mute Cruise control
Operates above 25 mph
To activate: Press and release
ON/OFF (1)
To set speed: Press and release
SET/COAST (3) at desired speed
To accelerate: Press and hold
RESUME/ACCEL (2); incremental
acceleration: Press and release (2),
each tap = plus 1mph
To decelerate: Press and hold
SET/COAST (3), release at desiredspeed; or tap brake pedal,
press and release (3) at
desired speed; incremental
deceleration: Press and release
(3), each tap = minus 1 mph
To cancel: Tap brake pedal, clutch
pedal (manual transaxle) or press
CANCEL button (4) or ON/OFF (1)
Return to preset speed after CANCEL
button or braking: Press and
release RESUME/ACCEL button (2)
Tilt steering-wheel lever
Pull lever located under steering-
wheel down to unlock column,
position tilt angle steering
column position
WARNING: Do not adjust
steering-wheel while driving,
you can lose control of vehicle
*Denotes optional equipment

CONSOLE/TRANSMISSION
Always check the Owner’s Manual for more operating information and safety features
Console/
Transmission
Transmission
Quick Tips 2004 Mazda Mazda RX-8 page 14
page 15
Automatic transmission*
P =Park
To move gearshift from Park:Press
firmly on brake pedal, then move
gearshift to gear selection
R =Reverse
N =Neutral No gear engaged
D (Overdrive)
For normal driving: Shifts
through four forward
gears automaticallyTip: Torque converter lock-up
improves fuel economy and can
feel like an additional gear change
WARNING: Placing shift lever
in P position without setting
parking brake may not hold
vehicle, always set parking brake
Sport AT manual
shift mode*
Move shift lever
return from D to M;
then M to D for
automatic mode
M (Manual)
Manual gear selection is achieved
by moving shifter back to upshift
and forward to downshift
Shift and gear position indicator
located in the instrument panel,
M will be illuminated for manual
mode, numeral for gear position
will be shown next to shift
position indicatorSteering shift switches
(A/T only)*
Upshift/downshift; pull
either switch up/down,
see Owner’s Manual
1. Console
Press button (6) and slide
cover rearward until it clicks
2. Parking-brake lever
To engage: Pull up
To release: Pull up slightly while
depressing button at front of
lever, lower hand brake lever3. Cup holders
4. Seat warmer*
Press on/off switch; indicator
light on when activated
5. Accessory socket
Manual transmission*
Depress clutch pedal to start
engine and change gears,
push shifter downward when
selecting reverse gearWARNINGS: Do not shift into
1st above 20 mph or clutch
failure could occur
Resting your foot on clutch
pedal while driving and using
the clutch to hold your vehicle
at a stand still while waiting
on a hill may reduce clutch life
P
R
N
D M
M
O
D
EVOLON
OFF
SET
ACCEL
CANCEL
SET
COAST
*Denotes optional equipment
2
4
1
5
36

SEATS
Always check the Owner’s Manual for more operating information and safety features
Seats
Seats
Quick Tips 2004 Mazda Mazda RX-8 page 16
page 17
1
456
23
Dual locking mode
lap/shoulder belt
retractor (front passenger
and rear safety belts only)
Emergency locking mode: Belt
locksonly on hard braking/
cornering or impacts of about
5 mph or more
Automatic locking mode:
Must be used when installing
child-safety seat
To activate: Pull webbing until fully
extended from retractor until click
is heard; belt will only tighten
when released
To disengage: Unbuckle belt and
allow webbing to retract fully Manual controls
1. Fore-aft adjustment
Lift lever and hold, slide
seat, release lever
2. Raise/lower seat
Pull/push lever and release
3. Seatback angle
To adjust: Lift and hold lever, lean
forward or backward, release lever
Tip: Side-impact air bags*
deploy from outboard
side of driver and front
passenger seatbacks
WARNINGS: Do not adjust
seats while driving, you can
lose control of vehicle
Safety belts must always be
worn when vehicle is in motion
Air bags are supplemental
and do not replace safety
belt usage
Always wear your safety belt
and properly secure children
12 and under in the rear seat
Never place rear-facing
infant-safety seat in front
of any air bag, an infant is
in serious danger of being
injured or killed
If you choose to install a
forward-facing child-safety
seat in the front seating
position, move vehicle seat
as far back as possiblePower driver’s seat*
4. Raise/lower front of
seat cushion
Pull/push front of switch vertically
Fore/aft adjustment
Slide switch horizontally
Raise/lower rear of
seat cushion
Pull/push rear of switch vertically
5. Seatback angle
Press front/rear of switch
6. Lumbar adjustment*
Press front/rear of switch to
increase/decrease firmness
Seat warmer*,
see Console/Transmission
Child-safety seat
To install in rear outboard seats:
Use dual locking mode retractor
seat belts; see Owner’s Manual
for proper installation and child
seat tether and LATCH system
instructions
WARNING: Use age
appropriate child restraints,
see Owner’s Manual and
state or province laws
*Denotes optional equipment

CLIMATE CONTROLS
Always check the Owner’s Manual for more operating information and safety features
Climate
Controls
Trunk
Quick Tips 2004 Mazda Mazda RX-8 page 18
page 19
Trunk
To open: Use key, remote
trunk-lid release or remote
keyless entry fob
Remote trunk-lid release,
see Driver’s View
Remote trunk-lid
release lock-out
Switch in ON position,
remote trunk release
functions normal; OFF position
disables system; located in glove box
1. Instant Mobility System
emergency flat tire
repair kit (IMS)
†,
see Getting Started2. Jack/jack handle
3. Lug wrench
Tire economy and tips
Check pressure regularly when
tires are cold, maintain correct
front-end alignment and tire
balance; rotate tires at the mileage
shown in the Maintenance
Guide; see Owner’s Manual
for rotation chart
Tire pressure
P225/55R16 94V,
P225/45R18 91W
Front/rear: 32psi cold
Tips: Correct tire pressure ensures
safe handling and ride comfort
If you experience pull/drift while
driving, possible causes may
be road crown, tire pressure,
or wheel alignment
The suspension is sport-tuned
with firmer ride for optimum
handling and responseTire chains*
†Tire chains can damage
aluminum wheels; use on
steel wheels only
Tips: Use only SAE class “S”
chains, install only on rear
tires; install as tightly as
possible and retighten
after driving 1/4 -1/2 miles;
chains may affect handling
Never exceed 30 mph with
tire chains
132
1. Air flow selections
= air to dash
= air to dash and floor
= air to floor
= air to floor and
windshield
2. Fan control
Rotate knob between 0 (OFF)
and 4 (HIGH)
3. Temperature control
Cooler/warmer = rotate knob
counterclockwise/clockwise
4. A/C= air conditioner
Press to turn on/off
5. Air intake control
= recirculate inside air;
use for maximum cooling
= fresh air
WARNING: Do not use
position in cold
weather, windows may
fog and hamper vision
6. Rear window defogger
Press on/off; shuts off with
ignition; also operates heated
side mirrors*
Control positions for
maximum defrost
Fan to maximum, temperature to
maximum hot, selectedTips: To help prevent windshield
fogging in humid weather,
select before starting engine
To prevent moisture buildup,
never drive with system off
Objects placed under the
front seats may interfere
with air flow to the rear
7. Front windshield
defogger
A/C switches ON and air
intake switches to fresh air
A/C01
2
3
4MODE
4231
756
*Denotes optional equipment†See Owner’s Manual
Luggage
compartment
internal safety
release
Allows you to escape
should you become locked in trunk
Slide illuminated release lever in
direction of arrow; lever will glow
if it has been exposed to light
Located on interior trunk lid
OFF ONTRUNK OPENER

UNDER HOOD
Always check the Owner’s Manual for more operating information and safety features
Under Hood
Quick Tips 2004 Mazda Mazda RX-8 page 22
page 23
1. Engine oil filler cap
SAE 5W-20
Remove engine cover (12) to
access engine oil dipstick and
oil filler cap
2. Automatic transmission
fluid dipstick*
Check with engine on at
operating temperature; fluid
level should be within cross-
hatched area/between top two
notches on dipstick
3 . Brake/Clutch* fluid reservoir
Fill to MAX mark with DOT 3
fluid; check with cap on
4. Battery
5. Fuse block
6. Air filter
7. Hood support rod
8. Hood latch
Push hood latch to the left,
open hood9. Engine coolant reservoir
Level should be between Fand
Llines when cold
WARNING: Never remove
coolant reserve tank cap
while engine is running or
hot; you could get burned
10. Engine oil dipstick
Check with engine off and at
operating temperature; fluid
level should be between Fand
Lmarks on dipstick
11. Windshield washer
reservoir
Fill with windshield
washer fluid
12. Engine cover
Break-in period
First 600 miles: Drive at varying
road and engine speeds; avoid
full throttle, rapid acceleration
or kick-down of transmission
Do not use special “break-in” oils
Anti-lock Braking System (ABS)*
ABS automatically reduces
hydraulic pressure to any wheel
on the verge of locking up
You may feel a slight pulsing of
the brake pedal and hear a
clicking noise; this tells you the
ABS is functioning properly;
increase pressure on pedal for
maximum braking
Tips: Maintain constant
pressure on the brake pedal
Do not pump the brakes
ABS self test*
A self-diagnostic test is performed
when starting; you may feel some
brake pedal pulsation and hear
some noise, this is normalUnique driving conditions
†
Every 5,000 miles change oil/filter,
inspect coolant level, lights, brake/
clutch fluid, tire pressure/wear,
locks/hinges and washer fluidNormal maintenance
notes
Rotate tires every 7,500 miles or
sooner if needed; replace cabin air
filter every 25,000 miles or 24 months
A.Change: Engine oil/replace filter
Lube: Locks and hinges
B.Inspect: Disc brakes
C.Inspect: Drive belts, fuel lines,
hoses, and connections, brake
lines and hoses, steering
operation and linkages, front
and rear suspension ball joints,
driveshaft dust boots, chassis
and body bolts, exhaust system
heat shields, cooling system,
and bolts and nuts on seat
D.Replace: Air filter, spark plugs
E.Clean: Air filter
F. Replace: Manual transmission
and rear differential oil,
engine coolant
1.3-liter 13B
*Denotes optional equipment†See Owner’s Manual
211210311
856974
7,500 miles
15,000 miles
22,500 miles
30,000 miles
37,500 miles
45,000 miles
52,500 miles
60,000 miles
67,500 miles
75,000 miles
82,500 miles
90,000 miles
A A A
A
A B C F A E A B A D
A B C E
A
A B E
A