buttons MAZDA MODEL SPEED MX-5 MIATA 2005 User Guide

Black plate (170,1)
qAntitheft Systemí
Display
Channel preset buttons
Antitheft indicator light
Auto memory
button
To deter theft of your vehicle's audio unit,
it has an integrated antitheft system. The
system is designed to accept a code
number that makes the unit inoperable if it
is stolen.
This system will be activated if the power
source is ever disconnected from or in any
way interrupted to the audio unit. When
the system is activated, the audio system
will not operate when reconnected to a
power supply, and “CODE ”will flash on
the display until the correct code number
is input. If the antitheft system is
activated, reset the unit.CAUTION
Read and understand all code setting
procedures before attempting to input
your personal code number.
The personal code number is only
shown on the audio unit display while it
is being set. Once it is input and stored
by the unit, it is never again displayed.
For that reason, be very careful to
immediately record your personal code
number, and never let an unauthorized
person set a code.
NOTE
Although the audio unit is operable
without the code number being set, we
recommend that you set your personal
code number.
6-44
Interior Comfort
íSome models.
Audio System
MX-5 Miata_8T72-EA-04G_Edition2 Page170
Tuesday, August 31 2004 11:24 AM
Form No.8T72-EA-04G

Black plate (171,1)
Setting procedure
1. Begin with the audio unit off and theignition switch is in the ACC position.
2. Press the auto memory button (
) and the channel preset button
6 simultaneously for about 2 seconds
until “CODE ”is displayed.
3. Again press the auto memory button
(
) and the channel preset button
6 simultaneously while “CODE ”is
displayed (within 10 seconds). The
display will exhibit bars.
4. While the bars are displayed, input your personal code number by pressing
channel preset buttons 1, 2, 3, and 4.
Press 1 for the first digit, 2 for the second,
3 for the third, and 4 for the last digit. For
example, if your number is 2547, press 1
three times, 2 six times, 3 five times, and
4 eight times. If the display goes off while
inputting, begin from Step 1.
NOTE
We recommend that your code number
be associated with something easy to
remember. You should also file a copy
of the code numbers with your
important papers.
5. While the code number is displayed, press the auto memory button
(
) and the channel preset button
6 simultaneously for about 2 seconds
and “CODE ”begins to flash. After
about 5 seconds, “CODE ”will
disappear. This indicates the system is
set.
Canceling code number
1. Begin with the audio unit off and the ignition switch is in the ACC position.
Interior Comfort
Audio System
6-45
MX-5 Miata_8T72-EA-04G_Edition2 Page171
Tuesday, August 31 2004 11:24 AM
Form No.8T72-EA-04G

Black plate (178,1)
qOperating the Radio
Band selector buttons Display
Channel preset buttons
Scan button
Manual tunin
g dial
Seek tuning
button
Auto memory
button
Radio ON
Press a band selector button (
or
) to turn the radio on.
Band selection
Choose AM by pressing the AM button
(
) and FM by pressing the FM1/2
button (
).
The selected mode will be indicated. If
FM stereo is being received, “ST ”will be
displayed.
NOTE
If the FM broadcast signal becomes
weak, reception automatically changes
from STEREO to MONO for reduced
noise, and the “ST ”indicator will go
out.
Tuning
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
NOTE
If the power supply is interrupted (fuse
blows or the battery is disconnected),
the preset channels will be canceled.
Manual tuning
Turning the manual tuning dial will
change the frequency higher or lower.
6-52
Interior Comfort
Audio System
MX-5 Miata_8T72-EA-04G_Edition2 Page178
Tuesday, August 31 2004 11:24 AM
Form No.8T72-EA-04G

Black plate (188,1)
qOperating the In-Dash CD Changerí
Disc-in indicator
Load button
Random button
Repeat button
Disc up button Reverse button
Channel preset buttons
Display CD slot
CD play button
CD eject
button
Scan button
Fast-forward
button
Track up
button
Track down
button
Disc down
button
Inserting the CD
The CD must be label-side up when
inserting. The auto-loading mechanism
will set the CD and begin play. There will
be a short lapse before play begins while
the player reads the digital signals on the
CD.
The disc number and the track number
will be displayed.
NOTE
A CD cannot be inserted while the
display reads “WAIT ”. A beeping
sound can be heard during this waiting
time. Simultaneously pressing the
power/volume dial and the load button
(
) for about 2 seconds will turn
this beeping sound ON or OFF. Normal insertion
1. Press the load button (
).
2. When “In ”is displayed, insert the CD.
Inserting CDs into desired tray number
1. Press and hold the load button (
)
for about 2 seconds until a beep is
heard.
2. Press the channel preset button for the desired tray number within 3 seconds
after the beep is heard.
3. When “In ”is displayed, insert the CD.
NOTE
The CD cannot be inserted to the
desired tray number if the number is
already occupied.
6-62
Interior Comfort
íSome models.
Audio System
MX-5 Miata_8T72-EA-04G_Edition2 Page188
Tuesday, August 31 2004 11:24 AM
Form No.8T72-EA-04G