air conditioning MAZDA MODEL TRIBUTE 2003 Quick Tips (in English)

CHILD-SAFETY SEATS
Always check the Owner’s Manual for more operating information and safety features
1. Fan control
To increase speed and flow:
Rotate knob clockwise
2. Air flow selections
= air to dash
= air to dash and floor
OFF = system off, no air flow
= air to floor
= air to floor and
windshield
= defrost, air to
windshield
3. Temperature selection
Cooler/warmer = rotate knob
counterclockwise/clockwiseAir conditioning system
MAX A/C= cooling with inside
air, air to dash only
A/C= cooling with outside air,
air to dash only
Control positions for
maximum defrost
Fan to maximum, temperature
to maximum hot, air flow selector
knob to
Tips: To prevent moisture
buildup, never drive
with system off
To help prevent windshield
fogging in humid weather,
select DEF before starting
engine
Child-Safety
Seats
Climate
Controls
Quick Tips Mazda 2003 Tribute page 12
page 13
Revised September 25, 2002
A/COFF
MAX
A/C
123
*Denotes optional equipment
Child-safety seat
To install in rear outboard
passenger seat positions using
dual-locking mode retractorsafety
belts; see Owner’s Manual for
proper installation and seat tether
and LATCH system instructionsWARNINGS: Use age
appropriate child restraints,
see Owner’s Manual and
state or province laws
Never place rear-facing
infant-safety seat in front
of any air bag, an infant
is in serious danger of
being injured or killed
If you choose to install a
forward-facing child-safety
seat in the front seating
position, move vehicle seat
as far back as possible
Rear child-safety seat
anchors
Anchors located on rear seat
cushion for securing child-safety
seat (see Owner’s Manual)Dual locking mode lap/
shoulder belt retractor
(front passenger and rear
outboard belts only)
Emergency locking mode: Belt
locks only on hard braking/
cornering or impacts of about
5 mph or higher
Automatic locking mode must
be used when installing child-
safety seat
To activate: Pull webbing fully out
of retractor until click is heard;
belt will only tighten
To disengage: Unbuckle belt
and allow webbing to retract
fully; for complete details see
Owner’s Manual