oil MERCEDES-BENZ AMG GT COUPE 2022 Owners Manual

Inf
Inf
or
ormation on v
mation on v ehicle sensor
ehicle sensor s and camer
s and cameras
as Some driving and driving saf
ety sy stems use cam-
eras as well as radar or ultrasonic sensors to
monitor the area in front of, behind or next tothe
ve hicle. 1
Multifunction camera
2 Cameras in the outside mir rors
3 Front radar 4
Front camera
5 Corner radars
6 Ultrasonic sensors
7 Reversing camera &
W
WARNING
ARNING Risk of accident due torestric-
te d de tection per form ance of vehicle sen-
sors and cameras
If th e area around vehicle senso rsor cameras
is co vered, damaged or dirty, cer tain driving
and saf ety sy stems cannot function co rrectl y.
There is a risk of an accident. #
Keep the area around vehicle senso rsor
cameras clear of any obst ructions and
clean. #
Have damage tothe bumper, radiator
gr ille or stone chipping in the area of the
front and rear wind owsre paired at a
qu ali/ed specialist workshop. Pa
rticular ly,ke ep the areas around the sensors
and cameras free of dirt, ice or slush
(/ page 354). The sensors and cameras must not be co
vered and the de tection ranges around
th em must be kept free. Do not at tach additional
licence plate brac kets, advertisements, stic kers,
fo ils or foils toprotect against stone chippings in
th e de tection range of the sensors and cameras.
Make sure that there are no overhanging loads
pr otru ding into the de tection range.
If th ere is damage toa bumper or thera diator
gr ille, or aTer an impact, ha vethe function of the
senso rschecked at a quali/ed specialist work-
shop. Ha vedamage or stone chipping in the area
of the cameras on the front and rear wind ows
re paired at a quali/ed specialist workshop.
% The reve rsing camera can extend and retract
automatically forth e purpose of calibration,
ev en though there is no camera image in the
displa y. Ov Ov
er
ervie
vie w of dr
w of dr iving syst
iving syst ems and dr
ems and dr iving safe
iving safety
ty
syst
syst ems
ems R
ABS (AA nti-lo ck BBra king S System) (/ page 211)
R BAS (BBra ke AAssist S System) (/ page 212) 210
210
Driving and parking

R
longitudinal/lateral acceleration
R steering angle
R engine speed
R engine oil/tyre tempe rature
Based on the anal ysis yo u can check and optimise
driving characteristics for any position on the
trac k.
Expor
Expor ting tr
ting tr ack
acks (USB)
s (USB) #
õ Select Tracks.
An ove rview of all stored trac ksappears. #
Select the desired trac k. #
Select options uforth e desired trac k. #
Select Export.
The selec ted track can be expor tedto a USB
storage device connected totheve hicle.
Editing tr
Editing tr ack
acks and r
s and r ecor
ecordings
dings #
õ Select Tracks. #
Select the desired trac k. #
Select options uforth e desired trac k. #
Select Rename orDelete.
or #
Select a trac k. #
Highlight the desired recording. #
Select Zoptions. #
Select Exporting to… orDelete. Se
Se
tting Dr
tting Dr ag R
ag Race
ace Multimedia system:
4 TRACK PACE 5
Drag Race
Measur
Measur ing acceler
ing acceler ation
ation #
Select ZDrag Options. #
Select Acceleration. #
Set a starting speed or select Automatic.
Measurement begins as soon as the speci/ed
starting speed has been reached. #
Set a targetspeed.
Measu rement stops as soon as the speci/ed
targ etspeed has been reached. #
Pull away and startthe measurement.
Measurement begins when theve hicle accel-
erates. Measu
rement can be stopped ear lyby stopping
th eve hicle.
Quart
Quart er
er-mile r
-mile r ace
ace #
Select ZDrag Options. #
Select Quarter-mile . #
Set a targetdistance.
Measurement stops as soon as the speci/ed
targ etdistance has been reached. #
Pull away and startthe measurement.
Measurement begins when theve hicle accel-
erates. Timing runs until thetarg etdistance or
a maximum of one mile has been tr avelled.
Measurement can be stopped ear lyby stopping
th eve hicle.
Measur
Measur ing br
ing braking
aking #
Z Drag Options #
Select Braking. #
Set a starting speed or select Automatic. #
Pull away and startthe measurement. MBUX multimedia system
305
305

R
When the engine is oTen leT idling for long
periods
R Operation in particular lydusty conditions
and/or if air-recirculation mode is frequently
used
In these or similar operating conditions, ha vethe
interior air /lter, air /lter, engine oil and oil /lter,
fo rex ample, changed more frequentl y.Check the
tyres more frequently if theve hicle is operated
under increased st ress. Further information can
be obtained at a quali/ed specialist workshop. Batt
Batt
er
ery disconnection per
y disconnection per iods
iodsThe AS
SYST PLUS service inter val display can cal-
culate the service due date only when the battery
is connected. #
Display and no tedown the service due date
on the inst rument display before disconnect-
ing the battery (/ page 344). Engine com
Engine com
par
partment
tment A
A
ctiv
ctiv e bonne
e bonne t (pedes
t (pedestr trian pr ot
ian pr otection)
ection) Oper
Oper
ation of t
ation of t he activ
he active bonne
e bonne t (pedes
t (pedestr trian pr ot
ian pr otec-
ec-
tion)
tion)
In cer tain accident situations, the actuation of the
active bonnet reduces therisk of injury topedes-
trians. The rear area of the bonnet is raised by
appr oximately 80 mm.
ATer being triggered, the active bonnet remains in
th era ised position. Limited visibility due tothe
ra ised bonnet cannot be ruled out.
ATer the active bonnet has been actuated, pedes-
trian pr otection may be limited.
Ha ve the full functionality of the active bonnet
re stored immediatel y in aquali/ed specialist
wo rkshop.
If necessar y,adjust your seat position and drive
carefully toaqu ali/ed specialist workshop. If a
safe continued jou rney is not possible, contact a
qu ali/ed specialist workshop. Opening and closing t Opening and closing t
he bonnet
he bonn et &
W
WARNI NG
ARNI NGRisk of accident due todriving
with the bonnet unloc ked
The bonnet may open and blo ckyour vie w. #
Neverre lease the bonnet when driving. #
Before every trip, ensure that the engine
bonnet is loc ked. &
W
WARNING
ARNING Risk of accident and inju ry
when opening and closing the bonnet
The bonnet may suddenly drop into the end
position.
There is a risk of injury for an yone in the
engine bonnet's range of mo vement. #
Do not open or close the bonnet if there
is a person in the bonnet's range of
mo vement. Maintenance and care
345 345

&
W
WARNI NG
ARNI NGRisk of burns when opening the
bonnet
If yo u open the bonnet in theev ent of an over-
heated engine or /re in the engine compart-
ment, thefo llowing situations may occur:
R You may come into contact with hot gases.
R You may come into contact with other
escaping hot operating 0uids. #
Before opening the bonnet, allow the
engine tocool down. #
Intheev ent of a /re in the engine com-
partment, keep the bonnet closed and
call the /re service. &
W
WARNING
ARNING Risk of injury due tomoving
parts
Components in the engine compartment may
continue torun or start unexpectedly even
when the drive system is switched o..
Obser vethefo llowing if you must open the
bonnet: #
Switch o. theve hicle. #
Neverto uch the danger zones sur round-
ing moving components, e.g. thero tation
area of thefa n. #
Remo vejewe llery and watches. #
Keep items of clo thing and hair away
from moving pa rts. &
W
WARNING
ARNING Risk of injury from touching
components under voltage
The ignition system and the fuel injection sys-
te m operate at high voltage. You could receive
an elect ric shoc k. #
Neverto uch ignition system or fuel injec-
tion system components when theve hi-
cle is switched on. The live components include
thefo llowing, for
ex ample:
R Ignition coils
R Fuel injectors R
Electric lines tothe ignition coils and the fuel
injectors &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. &
W
WARNING
ARNING Risk of injury from using the
windscreen wipers when the bonnet is
open
If th e windscreen wipers start moving when
th e bonnet is open, you could be trapped by
th e wiper linkage. #
Always switch o. the windscreen wipers
and theve hicle /r stifyo u need toopen
th e bonnet. 346
346
Maintenance and care

Opening t
Opening t
he bonnet
he bonnet #
Torelease the bonnet, pull on handle 1. #
Push handle 1ofthe bonnet catch upwards
and liT the bonnet until it opens automaticall y.
Closing t
Closing t he bonnet
he bonnet #
Lowe rth e bonnet and press it /rmly into the
lock with bo thhands. #
Ifth e bonnet can still be liTed a little, repeat
th e procedure until it engages cor rectl y. Engine oil
Engine oil
Chec
Chec
king t
king t he engine oil lev
he engine oil lev el using t
el using the on-board
he on-board
com
com put
puter
er
R
R eq
eq uir
uir ements:
ements:
R The engine has been warmed up.
R The vehicle is par ked on a le vel sur face.
R The engine is running at idle speed.
R The bonnet is closed.
The engine oil le vel is de term ined during driving.
De term ining the engine oil le vel can take up to
30 minutes with a normal driving style and even
longer with an active driving style.
On-board computer:
4 Service 5
Engine oil level
One of thefo llowing message s will appear onthe
inst rument displa y:
R Engine oil level Measuring now: measu rement
of the oil le vel is not yet possible. #
Repeat there qu est aTer a maximum of
30 minutes' driving. Maintenance and care
347 347

R
Engine oil level OK andthe bar display for
indicating the oil le vel on the inst rument dis-
play is green and is between "min" and "max":
th e oil le vel is cor rect.
R Engine oil level Add 1,0 l andthe bar display
fo r indicating the oil le vel on the inst rument
display is orange and is below "min": #
Add 1 l of engine oil.
R Reduce engine oil level andthe bar display for
indicating the oil le vel on the inst rument dis-
play is orange and is abo ve"max": #
Drain o. any excess engine oil that has been
added. Todo so, consult a quali/ed specialist
wo rkshop.
R For engine oil level turn on ignition #
Switch on theve hicle tocheck the engine oil
le ve l.
R Engine oil level System inoperative: The oil
le ve l sensor is defective or not connected. #
Consult a quali/ed specialist workshop.
R Engine oil level System currently unavail. #
Close the bonnet.
T
T opping up engine oil
opping up engine oil &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. &
W
WARNING
ARNING Risk of /re and injury from
engine oil
If engine oil comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite. #
Make sure that no engine oil is spilled
next tothe /ller opening. #
Allow the engine tocool o. and thor-
oughly clean the engine oil from compo-
nent parts before starting theve hicle. *
N NOOTE
TE Engine damage caused byan inco r-
re ct oil /lter, incor rect oil or additi ves #
Do not use engine oils or oil /lters which
do not cor respond tothe speci/cations
ex plicitly prescribed forth e service inter-
va ls. #
Follow the inst ructions on the service
inter val display forch anging the engine
oil and obser vethe prescribed change
inter vals. #
Do not use additives. *
N NOOTE
TE Damage caused bytopping up too
much engine oil To
o much engine oil can damage the engine or
th e catalytic con verter. #
Have excess engine oil remo ved at a
qu ali/ed specialist workshop. 348
348
Main
tenance and ca re

%
Depending on driving style, theve hicle con-
sumes up to0.8 litre of oil per 1000 km. The
oil consum ption may be higher than this when
th eve hicle is new or if you frequently drive at
high engine speeds. 8-cylinder engine 6-cylinder engine
#
Turn cap 1anti-clockwise and remo veit. #
Top up the engine oil. #
Replace cap 1and turn it clockwise until it
engages. #
Check the oil le vel again (/ page 347). Chec
Chec
king t
king t he coolant lev
he coolant lev el
el &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. &
W
WARNING
ARNING Risk of scalding from hot cool-
ant
If yo u open the cap, you could be scalded. #
Let the mo tor cool down before opening
th e cap. #
When opening the cap, wear pr otective
glo ves and saf ety glasses. #
Open the cap slo wlytorelease pressure. #
Have the coolant checked or re/lled on lyat a
qu ali/ed specialist workshop. Main
tenance and ca re
349
349

#
Do not use a high-pressure cleaner with
ro und-spr aynozzles. #
Have damaged tyres or chassis parts
re placed immediatel y.To
avo id damage toyour vehicle, obser vethefo l-
lowing when using a high-pressure cleaner:
R The key is at a minimum dis tance of 3 m away
from theve hicle. Otherwise theta ilgate could
open unintentionall y.
R Maintain a distance of at least 30 cm tothe
ve hicle.
R V
V ehicles wit
ehicles with decor h decorativ
ative f
e foil:
oil: Parts of your
ve hicle are co vered with a decorative foil.
Maintain a distance of at least 70 cm between
th efo il-co vered parts of theve hicle and the
nozzle of the high-pressure cleaner. Mo vethe
high-pressure cleaner nozzle around whilst
cleaning. The waterte mp erature of the high-
pressure cleaner must not exceed 60°C.
R Obser vethe information on the cor rect dis-
ta nce in the equipment manufacturer's opera-
to r manual. R
Do not direct the nozzle of the high-pressure
cleaner directly at sensitive parts such as
tyres, gaps, electrical component parts, bat-
te ries, illuminants and louvres. W W
ashing t
ashing t he v
he vehicle b
ehicle b y hand
y hand *
N
NOOTE
TE Engine damage due towa ter ing ress #
Take care not topoint thewa ter jet
directly towa rdsth e air inlet grille below
th e bonnet. Obser
vethere leva nt legal requ irements (e.g. in
some countries, washing byhand is permitted
only in special lydesignated wash ba ys). #
Use a mild cleaning agent (e.g. car shampoo). #
Washtheve hicle with luk ewarm water using a
soT car sponge. When doing so, do not
ex pose theve hicle todirect sunlight. #
Carefully hose theve hicle o. with water and
dry using a chamois.
% Obser vethe no tes on the care of car parts
(/ page 354). N
No
ot
tes on paintw
es on paintw or
ork/matt
k/matt /nish
/nishpaintw
paintw or
ork care
k care To
avo id damaging the paintwork and inter fering
with the driving assistance systems, please
obser vethefo llowing no tes:
P
P aint
aint
R Insect remains: Soak with insect remo ver and
ri nse o. the treated areas aTer wards.
R Bird droppings: Soak with water and rinse o.
aTer wards.
R Tree resin, oils, fuels and greases: remo veby
ru bbing gently with a clo thsoaked in petro-
leum ether or lighter 0uid.
R Coolant and brake 0uid: remo vewith a damp
clo thand clean water.
R Tar stains: use tarre mo ver.
R Wax: use silicone remo ver.
R Do not attach sti ckers, /lms or similar materi-
als. Only ha ve/lm attached tothe bumper at
a quali/ed specialist workshop.
R Remo vedirt immediatel y,where possible. 352
352
Main
tenance and ca re

Matt
Matt
/nish
/nish
R Only use ca reproducts appr ovedfor
Mercedes-Benz.
R Do not attach stic kers, /lms or similar materi-
als. Only ha ve/lm attached tothe bumper at
a qu ali/ed specialist workshop.
R Do not polish theve hicle and light-alloy
wheels.
R Only use car washes that cor respond tothe
latest engineering standards.
R Do not use car wash prog rammes with a /nal
hot wax treatment.
R Do not use paint cleaners, bu1ng or polishing
products, gloss preser vers,e. g. wa x.
In theev ent of paintwork damage:
R Always ha vepaintwork repairs car ried out at a
qu ali/ed specialist workshop.
R Make sure thera dar sensors function
(/ page 210). N
No
ot
tes on cleaning decor
es on cleaning decor ativ
ativ e f
e foils
oils Obser
vethe no tes on matt /nish care in thech ap-
te r "No tes on paintwork/matt /nish paintwork
care" (/ page 352). They also apply tomatt dec-
orative foils.
Obser vethe no tes on cleaning decorative foils to
avo id damage.
Cleaning
Cleaning
R For cleaning, use plenty of water and a mild
cleaning agent without additives or abrasive
substances (e.g. a car shampoo appr ovedfor
Mercedes-Benz).
R Remo vedirt as soon as possible. Avoid rub-
bing too hard in order tonot ir reparably dam-
age the decorative foil.
R Ifth ere is dirt on the /nish or if the decorative
fo il is dull: Use thePa int Cleaner recommen-
ded and appr ovedfo r Mercedes-Benz.
R Insect remains: Soak with insect remo ver and
ri nse o. the treated areas aTer wards.
R Bird droppings: Soak with water and rinse o.
aTer wards. R
Toprev ent water stains, dry a foil-wrapped
ve hicle with a soT, absorbent clo thaTer every
car wash.
A
A v voiding damag
oiding damag e t
e to t
o t he decor
he decor ativ
ative f
e foil
oil
R The service life and colou ring of decorative
fo ils are impaired by:
- Sunlight
- Temp erature (e.g. hot air blo wer)
- Weather conditions
- Stone chippings and dirt
- Chemical cleaning agents
- Oily products
R Do not use polish on matt decorative foil. Po l-
ishing will ha vethe e.ect of shining thefo il-
wrapped sur face.
R Do not treat matt or st ructured decorative
fo ils with wax.Pe rm anent stains may occur.
Scratches, cor rosive deposits, areas a.ected by
cor rosion and damage caused byincor rect care
cannot alw ays be comple tely rep aired. In this
case, contact a quali/ed specialist workshop. Main
tenance and ca re
353
353

Yo
u can obtain more information on care and
cleaning agents from the manufacturer.
In the case of foil-wrapped sur faces, optical di.er-
ences may occur between the sur faces that we re
not pr otected bya decorative foil aTer removing a
decorative foil.
% Have workor repairs todecorative foils car-
ri ed out at a quali/ed specialist workshop
(e.g. in a Mercedes-Benz Se rvice Centre). N
No
ot
tes on car
es on car e of car par
e of car par ts
ts &
W
WARNING
ARNING Risk of entrapment if the wind-
screen wipers are switched on while the
windscreen is being cleaned
If th e windscreen wipers are set in motion
while you are cleaning the windscreen or
wiper blades, you can be trapped bythe wiper
arm. #
Always switch o. the windscreen wipers
and theve hicle before cleaning the wind-
screen or wiper blades. &
W
WARNING
ARNING Risk of burns from theta ilpipe
and tailpipe trims
The exhaust tailpipe and tailpipe trims can
become very hot. If you come into contact
with these parts of theve hicle, you could burn
yo urself. #
Always be particular lycareful around the
ta ilpipe and theta ilpipe trims and super-
vise children especially closely in this
area. #
Allow vehicle parts tocool down before
to uching them. To
avo id damage totheve hicle, obser vethe no tes
on cleaning and care of thefo llowing car parts:
Wheels and r
Wheels and r ims
ims
R Use water and acid-free alloy wheel cleaners.
R Do not use acidic alloy wheel cleaners to
re mo vebrake dust. This could damage wheel
bolts and brake components.
R Toavo id cor rosion of the brake disks and
brakepads, drive theve hicle for a few minu tes aTer cleaning before parking it. The brake
disks and brakepads
warm up and dry out.
W W indo ws
indo ws
R Clean the windo wsinside and outside with a
damp clo thand with a cleaning agent recom-
mended for Mercedes-Benz.
R Do not use dry clo ths or abrasive or sol vent-
based cleaning agents toclean the inside of
windo ws.
% ATer changing the wiper blades or treating
th eve hicle with wax, clean the windscreen
th oroughly with cleaning agents recommen-
ded for Mercedes-Benz. Failure toobser vethe
application instructions may result in damage,
smear mar ksor dazzling spots.
% Remo veextern al fogging or dirt on the wind-
screen in front of the multifunction camera.
Otherwise, driving systems and driving saf ety
systems may be impaired or not available
(/ page 210).
W
W iper blades
iper blades
R Movethe wiper arms into there placement
position (/ page 144). 354
354
Maintenance and care