warning light MERCEDES-BENZ B-CLASS HATCHBACK 2021 Owner's Manual

The high beam will switch o. automatically in
the
fo llowing cases:
R Atspeeds below 25 km/h
R Ifot her road users are de tected
R If st reet lighting is su1cient
% The system's optical sensor is located behind
th e windscreen near theove rhead control
panel.
Switc
Switc hing A
hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist ton/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch tothe0058 position. #
Switch on the high beam using the combina-
tion switch.
If Ad aptive Highbeam Assist is activated,
th e00CE indicator lamp will light up on the
cent ral display section of the inst rument dis-
pla y.
Switc Switc hing
hingo.
o. #
Switch o. the high beam using the combina-
tion switch. A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus t Plus A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus function t Plus function &
W
WARNING
ARNING Risk of accident despite Adap-
tive Highbeam Assist Plus
Ad aptive Highbeam Assist Plus does not react
to:
R road users without lights, e.g. pedestrians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist Plus may failto recognise other road
users with their own lighting, or may recognise
th em too late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be
activated despite the presence of other road
users. #
Always obser vethero ad and tra1c con-
ditions carefully and switch o. the high
beam in good time. Ad
aptive Highbeam Assist Plus cann ottake into
account road, weather or tra1c conditions.
De tection may be restric ted in thefo llowing
cases:
R in poor visibility, e.g. fog, heavy rain or snow
R ifth ere is dirt on the sensors or the sensors
are obscured
Ad aptive Highbeam Assist Plus is only an aid. Yo u
are responsible for adjusting theve hicle's lighting
to the pr evailing light, visibility and tra1c condi-
tions. 144 144
Light and sight

A
A
djus
djus ting t
ting t he br
he br ightness
ightness #
Select Brightness. #
Adjust the brightness.
A
A ctiv
ctiv ating t
ating t he br
he brightness f
ightness f or zones
or zones #
Select Brightness. #
Select Brightness zones. #
Switch the function on or o..
or #
Set the brightness forth e desired zones.
A
A ctiv
ctiv ating multi-colour
ating multi-colour ed lighting
ed lighting #
Select Colour. #
Select Multi-colour. #
Select a colour combination.
A
A ctiv
ctiv ating multi-colour
ating multi-colour ed animation
ed animation #
Select Colour. #
Select Multi-colour animat..
The chosen colour combination will change at
prede/ned inter vals. A
A ctiv
ctiv ating w
ating w elcome lighting
elcome lighting #
Select Colour. #
Select Welcome.
When theve hicle is unloc ked, a special ambi-
ent lighting sequence will run.
A
A ctiv
ctiv ating dependency on air conditioning se
ating dependency on air conditioning se t-
t-
tings
tings #
Select Colour. #
Select Climate .
If ch anges are made tothete mp erature set-
ting in theve hicle, the colour of the ambient
lighting will change brie0y. Switc
Switc
hing t
hing t he int
he inter
erior lighting
ior lighting switc
switch-o.
h-o. delay
delay
time
time on/o.
on/o. Multimedia system:
4 © 5
Settings 5
Lights
5 Int. light. del. sw. off #
Switch the swit ch-o. delay time on or o..
When this function is active, the interior light-
ing lights up for a short time aTer theve hicle
is loc ked. Changing bulbs (onl
Changing bulbs (onl
y f
y for v
or v ehicles wit
ehicles wit h halog
h halogen
en
headlam
headlam ps)
ps) N
No
ot
tes on c
es on c hanging bulbs
hanging bulbs &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts whilst replacing a bulb
Bulbs, lamps and plugs can become very hot
during operation.
When replacing a bulb, you could burn your-
self on these component parts. #
Allow the component parts tocool down
before replacing the bulb. R
Do not use a bulb if it has been dropped or if
its glass has been scratched. The bulb may
otherwise explode.
R Do not touch the glass bulb with your bare
hands.
R Protect bulbs from moisture and do not allow
bulbs tocome into contact with liquids. Light and sight
147 147

004A
00AA Continuous wiping, slow
004B 00A9 Continuous wiping, fast #
Turn the combination switch tothe cor re-
sponding position 0047-004B. #
Single wipe/w
Single wipe/w ashing:
ashing:pushthe button on the
combination switch in the direction of ar row
1 .
R 00D3 Single wipe
R 00D4 Wiping with washer 0uid
% Obser vethe no tes on washing theve hicle in a
car wash (/ page 343). Switc
Switc
hing t
hing t he r
he rear windo
ear windo w wiper
w wiperon/o.
on/o. 1
00E2 Single wipe/ washing
2 00C5 Intermittent wiping #
Single wipe:
Single wipe: press button 1tothe point of
re sis tance. #
W
W iping wit
iping wit h w
h washer
asher 0uid:
0uid:press button 1
be yond the point of resis tance. #
Switc
Switc hing int
hing int er
ermitt
mitt ent wiping
ent wiping on/o.:
on/o.:press
button 2.
The 00C5 symbol will appear on the inst ru-
ment cluster when there ar wind owwiper is
switched on. R R
eplacing t eplacing t he windscr
he windscr een wiper blades
een wiper blades &
W
WARNING
ARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can be
trapped bythe wiper arm. #
Always switch o. the windscreen wipers
and vehicle before changing the wiper
blades. Mo Mo
ving t
ving t he wiper ar
he wiper ar ms int
ms into t
o the r
he r eplacement posi-
eplacement posi-
tion
tion #
Switch theve hicle on and then o. again
immediatel y. 150
150
Light and sight

#
Foldthe wiper arms back onto the wind-
screen. #
Switch on theve hicle. #
Press the00D4 button on the combination
switch (/ page 149).
The wiper arms will return totheir original
positions. #
Switch o. theve hicle.
% Check the condition of the wiper blades regu-
lar lyand replace them in theev ent of visible
damage or ongoing smearing. Maint
Maint enance display
enance display #
Remo veprotective /lm 1from the mainte-
nance displa yson the tips of the ne wly/tted
wiper blades.
When the colour of the maintenance displa ys
ch anges from black toyello w, replace the wiper
blades. %
The duration until the colour changes varies
depending on the usage conditions. R
R
eplacing t
eplacing t he r
he rear windo
ear windo w wiper blade
w wiper blade &
W
WARNING
ARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can be
trapped bythe wiper arm. #
Always switch o. the windscreen wipers
and vehicle before changing the wiper
blades. R R
emo emo ving t
ving t he wiper blade
he wiper blade #
Switch theve hicle o.. 152
152
Light and sight

&
W
WARNI NG
ARNI NGRisk of accident due tomis-
judgement of distance when using the
outside mir ror
The outside mir rors re0ect objects on a
smaller scale. The objects in vi eware in fact
closer than they appear. #
Therefore, alw ays look overyo ur shoul-
der in order toensure that you are aware
of the actual distance between you and
th ero ad users driving behind you. #
T To f o f old in or out:
old in or out: brie0y press button 2. #
T
T o set: o set: press button 1or3 toselect the
outside mir rorto be adjus ted. #
Use button 4toadjust the position of the
mir ror glass.
% Ifth e battery has been disconnected or com-
ple tely dischar ged, you will ha vetoreset the outside mir
rors. Only then will the automatic
mir rorfo lding function workproper ly. #
T
T o r o r eset:
eset: brie0y press button 2.
An outside mir rorth at has been pushed out of
position can be engaged in position again as fol-
lo ws: #
V
Vehicles wit
ehicles wit hout electr
hout electr icall
ically f
y folding outside
olding outside
mirr
mirr or
ors:
s: manually mo vethe outside mir ror into
th e cor rect position. #
V Vehicles wit ehicles wit h electr
h electricall
ically f
y folding outside mir-
olding outside mir-
r
r ors
ors: press and hold button 2.
Yo u will hear a click and the mir ror will audibly
click into place. The outside mir ror will now be
set tothe cor rect position. A
A
ut
ut omatic anti-dazzle mirr
omatic anti-dazzle mirr or
ors function
s function &
W
WARNING
ARNING Risk of acid burns and poison-
ing due tothe anti-dazzle mir ror electro-
ly te
Electrolyte may escape if the glass in an auto-
matic anti-dazzle mir ror breaks. 154
154
Light and sight

#
Press button 1.
The red or blue indicator lamp on button 1
will light up or go out. S
S
t
tationar
ationar y heat
y heat er/v
er/ventilation
entilation S
S
t
tationar
ationar y heat
y heat er/v
er/ventilation function
entilation function
% The following function is equipment-depend-
ent.
R The air inside theve hicle is heated or ventila-
te dto the set temp erature.
R The air inside theve hicle cann otbe cooled
down to temperatures below the outside tem-
perature.
R Ifth e outside temp erature changes, ventilation
mode automatically switches toheating mode
or heating mode automatically switches to
ve ntilation mode.
The stationary hea ter and theex haust gas outl et
are situated in front of theright-hand front wheel. Switc
Switc hing t
hing t he st
he st ationar
ationar y heat
y heater/v
er/ventilation
entilation on/o.
on/o.
via t
via t he oper
he oper ating unit
ating unit &
D
D AN
AN GER
GER Risk of fatal injury due topoison-
ous exhaust gases
If th eta ilpipe is bloc ked or su1cient ventila-
tion is not possible, poisonous exhaust gases
such as carbon monoxide may enter theve hi-
cle. This is the case in enclosed spaces or if
th eve hicle gets stuck in sno w,forex ample. #
Always switch the stationary heater o. in
enclosed spaces without an air extrac-
tion system, e.g. in garage s. #
Keep theta ilpipe and the area around
th eve hicle free from snow when the
ve hicle or the stationary heater is run-
ning. #
Open a wind owonthe side of theve hicle
fa cing away from the wind toensure an
adequate supply of fresh air. &
W
WARNING
ARNING Risk of /re due tohot station-
ary heater components and exhaust gases
Flammable materials such as lea ves, grass or
twigs may ignite. #
When the stationary heater is switched
on, make sure that:
R hot vehicle parts do not come into
contact with 0ammable materials.
R theex haust gas can 0ow out of the
stationa ryheater exhaust pipe unhin-
dered.
R theex haust gas does not come into
contact with 0ammable materials. *
N
NOOTE
TE Bat tery dischar gecaused bysta-
tionar y heater or stationaryventilation
ope ration Operating
the stationary heater or stationary
ve ntilation drains the batter y. #
ATer heating or ventilating theve hicle
twice, drive for a longer period of time. Climate control
163
163

R
R
eq
eq uir
uir ements:
ements:
R The fuel tank is at least 00C4full. #
Set the desired temp erature using the0082
button. #
Press button 1.
The red or blue indicator lamp on button 1
will light up or go out. The colours of
the indicator lamp ha vethefo llo w-
ing meanings:
R Blue:
Blue: stationary ventilation is switched on.
R R Red:
ed: the stationary heater is switched on.
R Y
Yello w:
ello w:the departure time is preselected.
The stationary heater/ventilation will switch o.
automatically aTer 50 minutes.
Oper Oper ation using t
ation using t he app:
he app:the stationary heater/
ve ntilation can also be ope rated via the Mercedes
me connect app. You can /nd fur ther information
in the separate Owner's Manual at https://
moba.i.daimler.com/mar kets/ece-r ow/baix/
ca rs/connectme/en_GB/#em otions/
St artsei te.html.
Se
Se tting t
tting t he st
he stationar
ationar y heat
y heater/v
er/ventilation via t
entilation via t he
he
multimedia syst
multimedia syst em
em
Multimedia system:
4 Climate menu 5
Auxiliary heating #
Call up the air conditioning menu
(/ page 158). #
Select Auxiliary heating . Selecting t
Selecting t
he depar
he departur
ture time
e time #
Select the time TIME A: XX, TIME B: XXor
TIME C: XX.
Se
Se tting t
tting t he depar
he depar tur
ture time
e time #
Select the time TIME A: XX, TIME B: XXor
TIME C: XX. #
Select the pen beside the time. #
Set a time. Air v
Air v
ents
ents A
A
djus
djus ting t
ting t he fr
he front air v
ont air v ents
ents &
W
WARNING
ARNING Risk of burns or frostbite due to
being too close tothe air vents
Ve ry hot or very cold air can 0ow from the air
ve nts. #
Make sure that all vehicle occupants
alw ays maintain a su1cient dis tance
from the air vents. #
If necessar y,direct the air0ow toano ther
area of theve hicle interior. 164
164
Climate cont
rol

#
Neverto uch damaged components of
th e high-voltage on-board electrical sys-
te m. #
ATer an accident, do not touch any com-
ponents of the high-voltage on-board
electrical system. #
ATer an accident, ha vetheve hicle trans-
por tedawa y. #
Have the components of the high-voltage
on-board electrical system checked at a
qu ali/ed specialist workshop and
re placed if necessar y.R
R
eq
eq uir
uir ements:
ements:
Only disconnect the high-voltage on-board electri-
cal system manually in thefo llowing situations:
R The 0075 restraint system warning lamp lights
up in the Instrument Displa y,e.g. aTer an
accident.
R The vehicle is badly damaged, e.g. aTer an
accident, and there straint system co mpo-
nents ha venot been triggered. T
T
o oper
o oper at
ate t
e t he high-v
he high-v olt
oltag
age disconnect de
e disconnect de vice
vice #
Switch o. theve hicle. #
ShiT the transmission toposition 005D. #
Apply the electric parking brake. #
Secure theve hicle against rolling away (see
th eve hicle Owner's Manual). #
Open the bonnet. #
Press release tab1 inthe direction of the
ar ro w and pull it out. #
Pull high- voltage disconnect device 2inthe
direction of the ar row until it engages.
The high- voltage on-board electrical system is
switched o..
All workon thehy brid drive system (including
aTer disconnecting the high-voltage on-board
electrical system manually) may only be car ried
out byaqu ali/ed specialist workshop. Switc
Switc
hing on t
hing on t he pow
he power suppl
er suppl y or t
y or the v
he vehicle
ehicle &
W
WARNING
ARNING Risk of accident and injury due
to leaving children unattended in theve hi-
cle
If ch ildren are leT unattended in theve hicle,
th ey could, in particular:
R open doors, thereby endangering other
persons or road users.
R get out and be struck byoncoming tra1c. 168
168
Driving and parking

#
Remo vetheke y1 from theke yring. #
Place theke y1 inthe mar ked space 2on
th e symbol 3.
The vehicle will start aTer a short time.
When youre mo vetheke y1 from the mar ked
space 2,theve hicle can be driven. For fur-
th er engine starts ho wever,theke y1 must
be located in the mar ked space 2onthe
symbol 3during the entire journe y. #
Have theke y1 checked at a quali/ed spe-
cialist workshop.
If t
If t he v
he v ehicle does no
ehicle does no t st
t st art:
art: #
Place theke y1 inthe mar ked space 2and
lea veitth ere. #
V
Vehicles wit
ehicles wit h manual tr
h manual tr ansmission:
ansmission: Depress
th e clutch pedal. #
Depress the brake pedal and start theve hicle
using the start/s top button.
% You can switch on the po wer supply or the
ve hicle with the start/s top button. Obser
veany information rega rding display mes-
sages that can be displ ayed on the inst rument
displa y. S
S
t
tar
ar ting t
ting t he v
he vehicle via R
ehicle via R emot
emote Online Ser
e Online Ser vices
vices Cooling or heating t
Cooling or heating t
he v
he vehicle int
ehicle int er
erior bef
ior bef ore
ore
st
st ar
ar ting t
ting t he jour
he jour ney
ney
Ensu rethefo llowing before starting the engine:
R The legal stipulations in the area where your
ve hicle is par ked allow engine starting via
smartphone.
R It is safe tostart and runth e engine where
yo ur vehicle is par ked.
R The fuel tank is su1cient lyfull.
R The star ter battery is su1ciently charge d.
Char
Char ging t
ging t he st
he start
arter batt
er batt er
ery bef
y bef or
ore st
e st ar
arting t
ting t he
he
jour
jour ney
ney
Yo u can receive a message on your smartphone
when the state of charge ofthe star ter battery is
lo w. You can then start theve hicle with the smart-
phone tocharge the batter y.The vehicle is auto-
matically switched o. aTer ten minutes. Ensure
thefo llowing before starting the engine:
R The legal stipulations in the area where your
ve hicle is par ked allow engine starting via
smartphone.
R It is safe tostart and runth e engine where
yo ur vehicle is par ked.
R The fuel tank is su1cient lyfull.
S
S t
tar
ar ting t
ting t he v
he vehicle (R
ehicle (R emot
emot e Online)
e Online) &
W
WARNING
ARNING Risk of crushing or entrapment
due tounintentional starting of the engine
Limbs could be crushed or trapped if the
engine is star ted unintentionally during service
or maintenance work. #
Always secure the engine against unin-
te ntional starting before ca rrying out
main tenance or repair work. R
R
eq
eq uir
uir ements:
ements:
R Park position 005Dis selected.
R The anti-theT alarm system is not activated.
R The hazard warning light system is switched
o.. Driving and parking
171
171

R
The bonnet is closed.
R The doo rsare closed and loc ked.
R The windo wsand sliding sunroof are closed. #
Start theve hicle using the smartphone.
ATer every engine start, the engine runs for
te n minutes.
Yo u can car ryout a maximum of two consecutive
starting attem pts. You must start the engine with
th eke y before trying tostart theve hicle again
with the smartphone.
Yo u can switch o. theve hicle at any time as fol-
lo ws:
R Viath e Smartphone App
R By pressing theÜ orß button on the
key
% Further information can be found in the
smartphone app.
Secur
Secur ing t
ing the v
he v ehicle ag
ehicle ag ains
ainst st
t star
arting bef
ting bef or
ore car ry-
e car ry-
ing out maint
ing out maint enance or r
enance or repair w
epair wor
ork:
k: #
Switch on the hazard warning light system.
or #
Unlock the doors.
or #
Open a side window or the sliding sunroof. R
R
unning-in not
unning-in not es
es To
preser vethe engine during the /rst 1,500 km:
R Drive at varying road speeds and engine
speeds.
R Do not drive at speeds greater than
140 km/h.
R Drive theve hicle in drive prog ram A
or ;.
R ShiT tothe next highest gear at theve ry latest
when the needle reaches the last third before
th ere d area in there v counter.
R Do not shiT down manual lyin order tobrake.
R Avoid overstraining theve hicle, e.g. driving at
full thro ttle.
R V
V ehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: do not
depress the accelerator pedal be yond the
pressure point (kickdown). R
Only increase the engine speed gradually and
accelerate theve hicle tofull speed aTer
1,500 km.
This also applies when the engine or parts of the
driv etra in ha vebeen replaced.
Please also obser vethefo llowing running-in
no tes:
R In cer tain driving and driving saf ety sy stems,
th e sensors adjust automatically while a cer-
ta in distance is being driven aTer theve hicle
has been deli vered or aTer repairs. Full sys-
te m e.ectiveness is not reached until the end
of this teach-in process.
R Brakepads, brake disks and tyres that are
either new or ha vebeen replaced only achie ve
optimum braking e.ect and grip aTer se veral
hund red kilometres of driving. Compensate for
th ere duced braking e.ect byapplying greater
fo rc eto the brake pedal. 172
172
Driving and parking