button MERCEDES-BENZ C-Class 2005 W203 Comand Manual

148 NavigationSoftware Updates1Ejecting DVD
2Opening/closing the display unit
3Warning message
Press EJECT to
close
You can update the system with a new
navigation DVD. The new DVD may include
new maps and/or new device software.Starting an update
DVDs are loaded and ejected at the
navigation module.

Switch the COMAND on (
page 27).Ejecting

Press l.
The display unit moves forward and
then tilts down. The DVD NAVIGATION
slot is visible.

Press the l button left of the
DVD NAVIGATION slot.
The navigation module ejects the DVD.
The message
No DVD in drive.
Please insert Navigation DVD.

will appear.

Remove the DVD from the slot.
Warning
G
The display unit can cause injury if
contacted when open. Please close after
inserting a navigation DVD. !Do not place anything on the lowered
display panel. Placing objects on the
lowered display panel may result in
damage to the display or COMAND
unit which is not covered by the
Mercedes-Benz Limited Warranty.
iUpdating may take several minutes.
During updating, the operation of
COMAND is restricted. You cannot
switch off the system.iThe navigation module is located
behind the display unit of the COMAND
(page 147).
iThere are two l buttons. One is on
the display unit 2. The other is located
left of the DVD NAVIGATION slot 1
behind the display.

152 ServiceService main menu

Service main menu
Press C.
The Service main menu will appear.
Service main menu
You can use the soft keys to open other
menus
SMS
soft key*:
Opens the SMS Inbox Folder
(
page 153).

Scr.off
soft key:

Press the
Scr.Off
soft key.
The screen is switched off.

Press any soft key or button.
The screen is switched on again.

System
soft key:
Switches to the system settings
(
page 160).
Activating the Service main menu iIf a service submenu is displayed, you
need to press the
Back
soft key.
iThe
SMS
soft key is visible if vehicle is
equipped for phone operation and
Mercedes-Benz specified mobile
telephone* is inserted in phone
cradle*.

155 Service
Tele Aid*

Tele Aid*
Tele Aid* incorporates the following
functions:
Emergency call system

Roadside Assistance

Information
For certain emergency situations, the
system automatically triggers an
emergency call. An emergency call can
also be triggered manually by pressing the
corresponding button. Refer to your
vehicle Operator’s Manual for additional
information.If the system initiates an emergency call,
Connecting
and theß symbol will
appear on the status bar. All active
connections are terminated.
During the emergency call,
Call

Connected
appears on the status bar. No
operation from COMAND is possible, so
you cannot disconnect the emergency call.Roadside Asssistance will assist if
technical problems with your vehicle are
experienced.
Roadside Assistance can be requested
manually by pressing the corresponding
button. Refer to your vehicle Operator’s
Manual for additional information.
Upon request of Roadside Assistance, the
system initiates the call to the Assistance.
Connecting
and theß symbol will
appear on the status bar. All active
connections are terminated except
Emergency call.
Emergency call system
Roadside Assistance

156 ServiceTele Aid*If the connection is made, the message Call
Connected
appears on the status
bar.
During activation of a Roadside Assistance
call, it is not possible to switch to another
application, but you can initiate an
Emergency call, if necessary.Terminating the connection

Press K.
COMAND reverts to the system last
active before Tele Aid was activated.
A call to the Response Center will be
initiated by pressing the corresponding
button. Information regarding the opera-
tion of your vehicle, the nearest authorized
Mercedes-Benz Center or Mercedes-Benz
USA products and services is available to
you. Refer to your vehicle Operator’s Man-
ual for additional information.
When an information call is initiated,
Connecting
and theß symbol will
appear on the status bar. All active
connections are terminated except
Emergency call and Roadside Assistance
call.When the connection is made, the
message
Call
Connected
appears on
the status bar.
During activation of an Information call, it
is possible to switch to another application
and initiate an Emergency call or Roadside
Assistance call, if necessary.
Information