display MERCEDES-BENZ C-Class 2005 W203 Comand Manual

36 AudioRadio operationWeather Band WB
In the FM or AM Radio main menu,
press the
WB
soft key.
An automatic scan is starting and the
COMAND plays and displays the
channel of the first strong WB station.
Switching back to FM or AM band

Press the
FM/AM
soft key.
or

Press the
WB
soft key
The station last tuned to will begin to
play.
Switching back to the Audio menu

Press the
Back
soft key.
The Weather Band WB station will con-
tinue to play.You can use the following functions:

Automatic seek tuning (
page 37)

Manual tuning (
page 37)

Station selection from the preset menu
(page 38)

Station selection via direct frequency
entry (FM, AM) (
page 37)

Automatic station scan (FM, AM)
(page 38)

Station selection from the FM/AM
Autostore presets (
page 43)
iWith the number keys 1 - 7 it is pos-
sible to choose a channel.
The message
No channel
will appear
if the system could not detect a chan-
nel.
Selecting a station

37 Audio
Radio operation
Automatic seek tuning
Press g or h.
or

Push the joystick to gor G.
FM- and AM-Bands, Weather Band WB
The radio will tune in to the next receivable
station (FM, AM) or channel (WB) with de-
scending/ascending frequency depending
on the direction of seek.
WB
Alternatively, you can select the channel
directly:

Press a number key 1 through 7.Manual tuning (FM, AM)

Activate the desired wave band
(page 35).

Press g or h longer than 2 se-
conds.
The function is active.

Press g or h repeatedly to
change the frequency step by step.
or

Push the joystick to H or h.
Each handling will change the
frequency by one step.
FM Band
The frequency displayed will change in in-
crements of 0.2 MHz.
AM Band
Tuning will take place in increments of
10 kHz.Station selection via direct frequency
entry (FM, AM)
E.g.: 102.7 MHz in the FM band

Activating the desired wave band
(page 35).

Press *.
An input line will appear.
iThe selected channel is not shown in
the status line.

45 Audio
CD operation

Only touch the CD on the sides.

Avoid touching the CD surface with
your fingers.

Clean the CD with a dry, lint-free cloth.
Wipe them from the inside to the outer
edge. Never wipe the CD in a circular
motion.

Do not use rubbing alcohol or solvents
to clean the CDs.

Do not expose the CDs to heat or direct
sunlight.

Do not write or put stickers on CD.Ejecting/loading a CD into the CD driveTips on caring for your CDs
Loading CDsWarning
G
In order to avoid distraction which could
lead to an accident, the driver should insert
CDs with the vehicle at a standstill and
operate the audio system only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 44 feet (approximately 14 m)
every second.
iThere are two l buttons. One is on
the display unit. The other is located
left of the CD AUDIO slot behind the
display, see next page.

47 Audio
CD operation
1Ejecting audio CD
2Opening/closing the display unit
3Warning message
Press EJECT to
close

With the COMAND switched on, press
l.
The display unit moves forward and
then tilts down. The CD AUDIO slot is
visible.

Press the l button left of the
CD AUDIO slot to eject a CD already
loaded.

Remove the CD from the slot.

Insert a CD into the slot. The CD should
be inserted with the label side up.
The COMAND pulls the CD in.

Press l on the display unit to return
the display unit to its closed position.
The display unit tilts up and then moves
to the rear.
Playback begins with track number
one.
The message
CD error
will appear if
there is a media error.

Remove the CD or switch to
another operation.
Warning
G
The display unit can cause injury if
contacted when open. Please close after
inserting an audio CD. !Do not place anything on the lowered
display panel. Placing objects on the
lowered display panel may result in
damage to the display or COMAND
unit which is not covered by the
Mercedes-Benz Limited Warranty.
iInserting a second CD with another CD
still loaded will cause damage to the
CD drive which is not covered by the
Mercedes-Benz Limited Warranty.
iThe message
Press EJECT to
close
will appear. If l on the
display unit is not pressed within 20
seconds, eight successive series of two
beep tones will sound to remind you to
return the display to its closed position
by pressing l on the display unit.
The active audio source will be muted
until the display has been returned to
its closed position.

49 Audio
CD operation
Playback locations for audio CDs are:
the CD drive in the COMAND

the CD changer*.
CD drive
CD changer*

In the Audio menu (
page 34), press
the
CD
or the
CD
soft key.
CD changer* main menu1CD number or name of the CD currently
playing
2Track number or name of the track
currently playing
3CD - CD changer*
CD - CD drive
Actual track number/max. track
number on CD and elapsed playback
time
4Symbol for inserted CD
Switching to CD operationiThe CD drive is located behind of the
display unit (
page 46).
iThe CD changer* can accomodate up
to 6 audio CDs. The CD changer* is
located in the glove box.
If a CD changer* is connected to the
COMAND, the
CD
soft key is
available.
iThe
Magaz.
soft key is only assigned
when the CD changer* is active.
If the CD changer* has already read the
magazine, the Magazine menu will
appear (
page 52) when you press the
Magaz.
soft key.
Otherwise the message
Magazine
scan Please wait
will appear first.

50 AudioCD operationCD drive
Activate the Audio menu (
page 34).

Press the
CD
soft key
.
The CD main menu is displayed.
If no audio CD has been inserted, the
message
No CD inserted
will
appear.

Load an audio CD into the CD drive
(page 45).
CD main menu
CD changer*
Activate the Audio menu (
page 34).

Press the
CD
soft key
.
The CD changer* main menu will
appear. The CD last played is played
back.
CD changer* main menu

If the last played CD is not available, the
next available audio CD is played back.
No CD in the magazine:
The message
Magazine empty
will
appear.

Load audio CDs into the CD changer*
(page 48).
Switching on
iThe name of the CD and the name of
the track played are displayed if the
information is available.iThe
CD
soft key is available if a CD
changer* is connected to the
COMAND.
iThe name of the CD and the name of
the track played are displayed if the
information is available.

51 Audio
CD operation
You can select a CD:
in the CD list (
page 51)

with the number keypad (
page 51)

in the magazine menu (
page 52)
In the CD listThe CD list includes all loaded CDs. Only
one list entry is visible at a time.
The entry is displayed above the track
indication. It shows the number of the CD
currently playing.

Push the joystick to H or h to
select another CD from the list.
After the CD is loaded, it is played
back.
or

Do not change the selection.
Playback of the last played CD is
continued.
With the number keypad
Selecting a CD (CD changer* only)iSelection is possible if the
CD changer* has loaded the magazine
(COMAND knows the position of filled
and empty slots) and at least two audio
CDs are loaded.
iThe number keys 1 - 6 can be used
for direct selection.
Keys
1 - 6 magazine slots 1 to 6
of the CD changer*

52 AudioCD operation
Press a number key, e.g. 2 to select
the corresponding CD.
The CD is changed. The selected CD is
played back.
The message
No CD
will
appear if a selected slot is empty.
In the Magazine menu

Press the
Magaz.
soft key.
The Magazine menu is displayed. If the
magazine has not been read in, the
message
Magazine scan
Please wait
is displayed first.

Push the joystick to g or G to
select a CD.

Press E.
or

Press one of the number keys 1 to
6.
The CD is changed. The message Loading CD
will appear.You can select a track:

with g or h (
page 52)

with the joystick (
page 53)

with the number keypad (
page 53)

with CD track scan (
page 53)
With g or h

Activate the main CD menu
(page 49).
Next track

Press h.
The next track is played.
iThe name of the CD instead of e.g.
CD1

is displayed if the information is
available.
Track select

53 Audio
CD operation
Previous track or start of title (if more
than 10 seconds of playing time has
elapsed)
Press g.
Playback begins.
Select any desired track

Press g or h as often as
necessary.
With the joystick

Push the joystick to g or G to play
the next or previous track.With the number keypad

Activate the CD main menu
(page 50).

Press *.
An input line will appear in the CD main
menu.
1Number of tracks on CD corresponds
with the valid number range
2Input line
E.g.: Track 14.

Press 1 and 4 in short succession.

After entering the track number, wait
approximately 3 seconds.
The selected track is played. The CD
main menu is displayed.
CD track scan
The tracks on a CD can be scanned one
after the other for 8 seconds each. The
function will switch off automatically when
the starting track is reached. You can also
manually stop the scan function.iEntries higher than the number of
tracks available on the CD are not
possible.

55 Audio
CD operation
On
Press J during playback.
The CD operation is muted and theß
symbol is displayed in the status bar.
The soft keys on the left side are
greyed out in some submenus.
Off

Press J again.
Playback will resume.
The ß disappears from the status bar.
The soft keys on the left side are
selectable again.The following options are available:

Normal sequence (
page 57)

Track mix (
page 57)

CD mix (
page 57)

Repeat track (
page 57)

Repeat CD (
page 57)
Muting
iCOMAND will also deactivate muting if
you
press A to select another audio
source

change the volume

press either g or h.
Playback modeiIf the CD changer* is connected, the
playback modes
Repeat CD
and
CD mix
are available additionally.