Esp not available MERCEDES-BENZ C-Class 2008 W204 Comand Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2008, Model line: C-Class, Model: MERCEDES-BENZ C-Class 2008 W204Pages: 225, PDF Size: 3.26 MB
Page 148 of 225
147 Navigation
POI input
i If the crosshairs are visible on the map, you
can enter POIs in the vicinity of the crosshairs.
If the crosshairs are not visible, you can enter
POIs in the vicinity of the current vehicle loca-
tion.
In the map display with the menu sys-
tem displayed (
page 119) select
“Guide”.
POIs are available:
Depending on the map scale selected,
POI symbols are displayed on the map.
The scale starting at which symbols are
displayed on the map varies from sym-
bol to symbol.
You can select which symbols
COMAND should display (
page 121).
The POI nearest to the center of the
screen is selected automatically.No POIs available:
A corresponding message is displayed.
i This message is also displayed if the menu
item “No Symbols” under “Map Display” has
been selected (
page 121).
To confirm message: Press n.
1Information about the highlighted POI
2Highlighted POI
To select a POI: Select “Next” or
“Previous”.
To display details on the selection:
Select “Details”.
To start route calculation: Select
“Start”, see also (
page 135).
You will be asked whether the POI
should be adopted as the destination.
Select “Yes” or “No”.
Route calculation starts if “Yes” is se-
lected; a new POI can be chosen if “No”
is selected.
Entering a POI via the map
Page 153 of 225
152 Navigation
Route guidance
Once you have reached your destination, a
checkered flag is displayed and route guid-
ance is ended automatically.Route guidance to an off-road destina-
tion
COMAND can also guide you to destina-
tions that are within the area covered by
the digital map, but are not themselves in-
cluded on the map.
Such destinations are off-road destina-
tions, which you can enter, for example, by
entering the destination via the map.
In this case, COMAND guides you on roads
known to the system for as long as possi-
ble using navigation announcements and
route guidance displays.1Off-road destination
2Off-road route segment (dashed line)
3Current vehicle location, tip of the tri-
angle points in the vehicle’s direction
of travel
4Off-road, no road name available
Just before reaching the last known point
on the map, the message “You will enter an
area with unreliable map data in xx miles” is
announced.
When the vehicle is entering the area that
is not covered by the digital map, the
screen is split. On the right half of the
screen an arrow appears that points to the
off-road destination
1 and the system
announces: “Please follow the arrow on the
display”. When the vehicle comes close to
the destination the message “Destination
region reached” is given.
Destination or destination region
reached
Off-road and off-map
G Warning
The COMAND navigation system may direct
you to off-road routes that your vehicle may
not be capable of traversing through without
damaging your tires, wheels or vehicle. It is
the driver’s sole responsibility to determine
the suitability of the route. Off-road routes
may be of varying conditions and their ap-
propriateness for use may be affected by
various factors such as time of day, time of
year and immediate weather conditions that
cannot be judged or taken into consider-
ation by the COMAND system.