Esp not available MERCEDES-BENZ C-Class 2008 W204 Comand Manual

11 Introduction
Operating safety
DaimlerChrysler declares herewith that
this device conforms to the basic
requirements and the other relevant
regulations of Directive 1999/5/EC (RTTE
Directive).
Please bear the following information in
mind when using the COMAND:

The safety instructions in this guide

Road Traffic Regulations
i Tampering with electronic components or
systems (e.g. radio, DVD changer) and their soft-
ware may result in malfunctioning. Systems
which have not been changed may be affected
due to the connectivity of the electronics.
Malfunctions of the electronics can seriously en-
danger the operational safety of your vehicle.
i Always have all work or modifications to
electronic components carried out by a qualified
specialist workshop with the necessary exper-
tise and tools for any work required.
DaimlerChrysler recommends a Mercedes-Benz
Service centre for this purpose.
Especially for safety-related operations and op-
erations on safety-related systems, servicing by
a qualified specialist workshop is essential.
For safety reasons, some COMAND func-
tions are restricted or not available when
the vehicle is moving. This can be recog-
nized, for example, from the fact that cer-
tain menu items cannot be selected or the
COMAND displays a corresponding mes-
sage.
Declaration of conformity regarding
the distribution of telecommunica-
tions equipment
Intended purpose
Function restrictions when driving
the vehicle

64 Audio
CD audio/DVD audio and MP3
To switch to the next folder up: Se-
lect theQsymbol.
The display changes to the next folder
up.
1Disc name (if stored on disc)
2Current folder
3Folder symbolTo select a folder: Rotate ymz or
slide qmr.
Press n.
The tracks of the folder appear.
To select a track: Rotate ymz or slide
qmr.
Press n.
The track is played, the corresponding
folder is now the active folder.
i The function is only available in CD audio
mode.
CD information, including album title, artist
name and track name, is obtained from the
Gracenote
® Media Database. A version of
the Gracenote® Media Database is stored
on the COMAND’s hard drive. Access to
this database is indicated by the
Gracenote logo being displayed in the low-
er right of some audio displays.
Gracenote Media Database

65 Audio
CD audio/DVD audio and MP3
Many audio CDs contain CD text.
COMAND uses the information contained
in this text for displaying the name of the
artist, album and track.
If the audio CD does not contain any CD
text, COMAND can recognise unknown
audio tracks in CD audio mode with the aid
of the Gracenote Media Database. For this
to happen, the corresponding information
must be stored in the Gracenote Media
Database and the “Read CD Database”
function must be switched on.
If this is the case, COMAND provides the
corresponding data, such as name of art-
ist, album and track, in the corresponding
displays and lists.
If COMAND accesses the Gracenote Media
Database while reading an audio CD, the
following information is displayed:Switching ‘Read CD database’ function
on and off
Switching to CD audio mode
(

page 60).
Select “CD” K “Read CD Database”.
Depending on the previous status, the
function will be switched off C or on D.Updating the Gracenote
® Media
Database
As new music CD releases occur it is nec-
cessary to update the Gracenote Media
Database. Optimum Gracenote
®
music recognition function is only
achieved when the most up-to-date data-
base is available in your vehicle.
You can have the music recognition soft-
ware updated at an Authorized Mercedes-
Benz center by means of a DVD or, perform
the update process yourself.
i The Gracenote® Media Database is updated
at the same time as the map software
(

page 113).

66 Audio
CD audio/DVD audio and MP3
It is only possible to set the audio format in
DVD audio mode. The number of available
audio formats is dependent on the DVD.
The content of an audio DVD is called the
‘album’, which can be divided into a maxi-
mum of nine groups. A group may contain,
for example, music of different sound qual-
ities (stereo and multi-channel formats) or
bonus tracks. Each group can include up to
99 tracks. If a DVD audio only comprises
one audio format, the “Group” menu
item(s) cannot be selected.
Switch to DVD audio mode
(

page 60).
Select “DVD-A” K “Group”.
The list of available audio formats ap-
pears. A dotRindicates the format
currently selected.
To change setting: Rotate ymz or
slide qmr.
Press n.
To exit menu: Slide omp.The following options are available:
“Normal Track Sequence”
You will hear the tracks in the normal
sequence (e. g. track 1, 2, 3 etc.).
“Random Tracks”
You will hear the tracks in random or-
der (e. g. track 3, 8, 5 etc.).
“Folder” (only in MP3 mode)
The tracks in the currently active folder
and any subfolders are heard in ran-
dom order.
To select an option: Switch to CD au-
dio, DVD audio or MP3 mode
(

page 60).
Select “CD” or “DVD-A” or “MP3”.
The Options list appears. A dotRindi-
cates the activated option.
Select an option.
The option is activated. A correspond-
ing display will appear in the display/
selection window for all options except
“Normal Track Sequence”.
i The option “Normal Track Sequence” is au-
tomatically activated if you change the medium
which is currently being played or if you select
another medium. An activated option remains
active after COMAND is switched on or off.
Setting audio formatPlayback options

69 Audio
Music Register
Start the reording
Rotate ymz or slide omp until “Start”
is highlighted.
Press n.
In the display information about
source, destination and progress of the
recording is shown.
i The Disc menu re-appears automatically af-
ter a sucessful recording.
To stop the recording: Rotate ymz or
slide omp until “Cancel” is highlighted.
Press n.
The Disc menu re-appears.This function can be used to delete all the
music files in the Music Register.
Select “Music Register” K “Delete All
Music Files”.
A prompt appears. “No” is highlighted.
Do not delete: Press n.
The Music Register menu appears.
To delete: Select “Yes”.
A corresponding message appears.
Select “Music Register” K “Memory In-
fo”.
A window appears containing informa-
tion on:
Memory capacity
Available memory
Occupied memory
Content (folders, tracks)You can view the content of the Music Reg-
ister, change folder/track names and de-
lete individual folders/tracks.
Select “Folder” in the submenu.
1Back folder symbol
2Music file symbol
3Current folder
or
Press n if the display/selection win-
dow is highlighted.
A similar list appears that also shows
the content of the music register.
Deleting all music files
Requesting memory space informa-
tion
Folder functions

70 Audio
Music Register
To switch to the next folder up: Se-
lect theQsymbol.
The display changes to the next folder
up.
Changing folder/track name
Select “Folder”.
To select a folder/track: Rotate ymz
or slide qmr.
Select “Options” K “Change”.
Enter a name for the folder/track in the
input line.
To save change: Select B.
Deleting folder/track
Select “Folder”.
To select a folder/track: Rotate ymz
or slide qmr.
Select “Options” K “Delete”.
A prompt appears. “No” is highlighted.
Do not delete: Press n.
To delete: Select “Yes” and press n.
A message appears.The following options are available:
“Normal Track Sequence”
You will hear the tracks in the normal
sequence (e. g. track 1, 2, 3 etc.).
“Random Tracks”
The tracks are played in random order.
“Random Folder”
The tracks of the currently active folder
and any subfolders are heard in ran-
dom order.
To select an option: Switch to Music
Register (

page 67).
Select “Music Register” in the sub-
menu.
The Options list appears. A dotRindi-
cates the activated option.
Select an option.
The option is activated. A correspond-
ing display will appear in the display/
selection window for all options except
“Normal Track Sequence”.
i The option “Normal Track Sequence” is au-
tomatically activated if you change the medium
which is currently being played or if you select
another medium. An activated option remains
active after COMAND is switched on or off.Playback options

81 Video
DVD video
Stopping film or skipping to the
beginning/end of a scene
Select any menu item from the DVD
menu.
The selection menu appears.
To stop a film: Select the menu item
“Stop”.
To skip to the end of the scene: Se-
lect the menu item r.
To skip to the beginning of the
scene: Select the menu item p.
i Depending on the DVD, it is possible the
menu items p and r either have no func-
tion or no function in certain parts of the DVD
menu. This is indicated by the 7 symbol on the
display.
Switching to the next DVD menu up
Press the í button.
or
Select the corresponding menu item
from the DVD menu.
or
Select any menu item from the DVD
menu.
In the selection menu select the menu
item “Go Up”.
i Depending on the DVD, it is possible the
menu item “Go Up” either has no function or no
function in certain parts of the DVD menu. This is
indicated by the 7 symbol on the display.
Back to movie
Press the í button repeatedly until
the film is shown.
or
Select the corresponding menu item
from the DVD menu.
or
Select any menu item from the DVD
menu.
In the selection menu select the menu
item “Back (to movie)”.
i Depending on the DVD, it is possible the
menu item “Back (to movie)” either has no func-
tion or no function in certain parts of the DVD
menu.
i The function is not available for all DVDs. If
it is available, you can set the DVD menu lan-
guage, the audio language or the audio format.
The number of settings is determined by the DVD
content. The settings may also be possible in the
DVD menu (
page 80).
In DVD video mode, if necessary dis-
play the menu system (
page 77).
Select “DVD-Video” K “DVD Func-
tions”.
Select “Audio Language”.
A selection menu will appear after a
short time. The dotRin front of an en-
try indicates the currently selected lan-
guage.
To change setting: Rotate ymz or
slide qmr until the desired setting is
reached.
To save setting: Press n.
To exit menu without changes: Slide
omp.
Setting language

112 Navigation
Introduction
The digital data for the map software will
become obsolete, just like conventional
road maps. Optimum route guidance by
the navigation system is only achieved
with up-to-date map software. Information
on new map software versions is available
from an authorized Mercedes-Benz Center.
You can have the map software updated
there by means of a DVD or perform the
update process yourself.
Notes on DVD discs

Only touch the discs at the edges.

Handle the discs with care in order to
prevent reading errors.

Avoid scratching, leaving fingerprints
and dust on the discs.

Use a commercially available cleaning
cloth to clean discs. Always wipe in a
straight line from the inside outwards,
never in a circular motion.

After use, put the discs back into the
box.

Protect the discs from heat and direct
sunlight.
Introduction
Safety instructions
G Warning
For safety reasons, only enter a destination
when the vehicle is stationary. When the ve-
hicle is in motion, a passenger should enter
the destination. Study manual and select
route before driving.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
COMAND calculates the route to the desti-
nation without taking account of the follow-
ing:

Traffic lights

Stop and right-of-way signs

Lane merging

Parking or stopping prohibited areas

Other road and traffic rules and regula-
tions

Narrow bridges
G Warning
COMAND may give incorrect navigation
commands if the data in the digital map
does not correspond with the actual road/
traffic situation. Digital maps do not cover
all areas nor all routes within an area. For ex-
ample, if the traffic routing has been
changed or the direction of a one-way road
has been reversed.
For this reason, you must always observe
applicable road and traffic rules and regula-
tions during your journey. Road and traffic
rules and regulations always have priority
over the navigation commands generated by
the system.
G Warning
Navigation announcements are intended to
direct you while driving without diverting
your attention from the road and driving.
Please always use this feature instead of
consulting the map display for directions.
Consulting the symbols or map display for
directions may cause you to divert your at-
tention from driving and increase your risk
of an accident.
Updating the map software

121 Navigation
Introduction

8 = Bird’s-eye view (the map display is
oriented in the direction of travel, the
map projection reproduces the curva-
ture of the earth’s surface, the orange
tip of the symbol points northwards)
Example of map from bird’s-eye view
1Current crosshairs location
2Currently set map orientation
To set map orientation: Display menu
system if applicable (
page 119).
Select “Navi” K “Map Display”.
A dotRindicates the current setting.1Options for map orientation
2Options for POI symbols (
page 121)
Select “North Up” or “Heading Up” or
“Bird‘s-eye View”.
To exit menu: Slide omp.
Hide menu system if applicable
(
page 119).
The map orientation changes accord-
ingly.
Setting POI symbols
You can select which POIs are to be dis-
played as symbols on the map. Points of in-
terest include, for example, gas stations,
hotels, cinemas and restaurants.The following settings are available:

“Standard Symbols”
Displays the factory-set symbols

“Personal Symbols”
You can choose the symbols yourself.

“No Symbols”
To set: Display menu system if applica-
ble (
page 119).
Select “Navi” K “Map Display”.
Select “Standard Symbols” or “Personal
Symbols” or “No Symbols”.
If you have selected “Personal Sym-
bols”, the list of POIs will be displayed.
To switch symbol display on/off:
Select the corresponding POI.
Depending on the previous status,
the corresponding symbol displays
will be switched on D or off C.
You may also activate the symbol
displays for several POIs.
i The list indicates all symbols for all coun-
tries that are contained in the digital map. How-
ever, not all POIs are available in all countries. As
a result, certain POI symbols may not be shown
on the map even though the symbol display is
switched on.


138 Navigation
Destination input
1Current vehicle location (displayed if
the vehicle location is close to the
crosshairs position)
2Crosshairs
3Information on crosshairs position
4Set map scale
i The display 3 depends on the setting se-
lected in “Information On Map” (
page 123). It
may display the current road if corresponding
data is available in the digital map. Or it displays
the geo-coordinate position of the crosshairs if
“Geo-coordinates display” is activated
(
page 124) and if there is adequate GPS re-
ception.
Moving the map and selecting a desti-
nation
To move the map: Slide qmr, omp or
wmx.
To set the map scale: Rotate ymz.
Rotating clockwise makes the map
smaller, rotating counterclockwise en-
larges it.
To select a destination: Press n.
If the crosshairs are outside the digital
map, a route to this destination cannot
be calculated and the message “The
crosshair is off the map” is displayed.
Select “OK”.
If the destination is within the digital
map, COMAND tries to find the desti-
nation on the map.
If the destination can be found, the En-
ter Destination menu is displayed with
the address of the destination. Other-
wise you will see the entry “Destination
From Map”.
To start route calculation: Select
“Start”, see also (
page 135).
i If route guidance is active, you can enter a
stopover destination. Stopover destinations may
be predefined destinations in the following cate-
gories suggested by COMAND for you to select:

“Mercedes-Benz Service”

“Hospital”

“Gas Station”

“Parking Lot”

“Restaurant”
However, you can also enter destinations other
than those that have been predefined. Select the
menu item “OTHER” for this purpose.
You can influence the route guidance to the main
destination in a specific way using the stopover
function. Once the stopover destination has
been reached, COMAND automatically recalcu-
lates the route to the main destination.
Entering predefined destinations
If necessary switch to navigation mode
and display menu system
(
page 118).
Select “Destination” K “Stopover”.
Entering stopover destination