Format MERCEDES-BENZ C-Class 2008 W204 Comand Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2008, Model line: C-Class, Model: MERCEDES-BENZ C-Class 2008 W204Pages: 225, PDF Size: 3.26 MB
Page 38 of 225
37 At a glance
Basic functions of COMAND
To save setting: Press n.
The setting is stored and the menu is
exited.
To exit menu without changes: Press
the Back button
í.
Your vehicle is equipped with the harman/
kardon LOGIC7
® Surround Sound system.
You can select between “
LOGIC7®On” and
“
LOGIC7®Off”.
harman/kardon LOGIC7
® Surround Sound
is available for the following operating
modes:
Radio (FM only)
SatRadio*
CD audio
DVD audio (MLP, DTS, PCM and Dolby
Digital audio formats)
MP3 (including PCMCIA memory card)
Aux
DVD video (PCM, DTS and Dolby Digital
audio formats)
i As some DVDs contain both stereo and also
multi-channel audio formats, it may be neces-
sary to set the audio format (
page 66).
i The “LOGIC7®On” function of the harman/
kardon LOGIC7® Surround Sound system per-
mits the playback of discrete 5.1 and stereo re-
cordings with an optimal surround sound
platform for each passenger. Music and films on
CD or audio and video DVDs with high-resolution
surround formats, such as MLP, DTS or Dolby
Digital, are played with optimum sound.
The LOGIC7
® distributes the 5.1 surround infor-
mation over the 12-channel system architecture
to provide the optimum sound in all seats. This
produces the sound characteristics as intended
by the sound engineer during the original record-
ing.
harman/kardon LOGIC7
® converts all two-chan-
nel stereo sound sources into multi-channel sur-
round sound. The surround information stored
during the original recording is read out using
LOGIC7
® and likewise distributed over the
12 channels. No effects are created during the
process, anything that was always on the record-
ing is just made audible again.
Moreover, harman/kardon LOGIC7
® draws the
audible sound source away from the individual
loudspeakers, thus creating a natural 360°
sound platform for each passenger.
i By selecting “LOGIC7® Off”, the playback
of all playable formats is performed as on the ex-
isting medium. Due to the spatial conditions in
the vehicle, optimal sound is not possible in all
seats.
i Discs supporting the above-mentioned au-
dio formats display the following logos
Dolby Digital
DTS
MLP
Surround sound
Page 41 of 225
40 Audio
Radio
i Information on the COMAND control system
and how to operate it can be found on
(
page 14) and (page 31).
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. the (, &, $ or % but-
tons, for selecting a station or a menu or scroll-
ing through lists (
page 23).
From the COMAND control unit
Press the X function button.
i Press the button repeatedly to switch wave-
band in the sequence FM, AM, WB (
page 42)
and SatRadio* mode (
page 45). Pressing
again will switch back to FM radio mode.
From the COMAND controller
From another main function
Select “Audio” K “Audio” K “FM / AM
Radio” in the display.
i If radio mode was active last, you only need
to select “Audio”.
Within the audio function
Select “Audio” K “FM / AM Radio”.The radio display appears. The last se-
lected station in the last selected wave-
band is heard.
Display with Audio menu
1Main function line
2Audio menu
3Current audio mode
i You can switch to the various audio modes
in the audio menu:
FM / AM radio mode
SatRadio* mode (page 45)
CD-/DVD audio/MP3 mode (“Disc” and
“Memory Card” are described together in
this guide), (
page 60)
Music Register (page 67)
Aux mode (page 71)Radio display
1Display/selection window with station
or frequency
2Memory preset number
3Name or frequency of selected station
4Sound settings
5WB (Weather band)
6AM radio
7FM radio
8Stored station list
9Radio functions
Radio
Switching to the radio
Page 42 of 225
41 Audio
Radio
Submenu overview
Radio (FM and AM only)Presets (FM and AM only)Channel (WB only)Sound
Enter FrequencyAutostoreList of receivable channelsTreble
D Station information
(only FM)List of stored stationsBass
Balance/Fader
Surround sound
Page 46 of 225
45 Audio
Satellite radio*
In chapter “Satellite radio*”, you will find
detailed information regarding
selecting a station and a program cate-
gory
memory functions
sound adjustments
If you have not done so already, please fa-
miliarize yourself with these functions by
reading chapter “At a glance”.
i Optional satellite radio equipment and a
subscription to satellite radio service provider
are required for the satellite radio operation de-
scribed here.
i Note that categories and channels shown in
illustrations are dependent on programming con-
tent delivered by the service provider. Program-
ming content is subject to change. Therefore,
channel and categories shown in illustrations
and descriptions contained in this manual may
differ from the channels and categories deliv-
ered by the service provider.
Satellite radio service may be unavailable or in-
terrupted from time to time for a variety of rea-
sons, such as environmental or topographic
conditions and other things we can’t control.
Service might also not be available in certain
places (e.g., in tunnels, parking garages, or with-
in or next to buildings) or near other technolo-
gies.i SIRIUS Satellite Radio provides over 130
channels of digital-quality radio, including 100%
commercial-free music, sports, news and enter-
tainment.
SIRIUS Satellite Radio uses a fleet of high-power
satellites to broadcast 24 hours per day, coast-
to-coast, in the contiguous U.S.
This diverse, satellite-delivered programming is
available for a monthly subscription fee. For
more information, call the SIRIUS Service Center
(
page 46) or contact www.sirius.com (USA) or
www.siriuscanada.com (Canada).
Satellite radio*
Important notes
Page 47 of 225
46 Audio
Satellite radio*
Subscribing to satellite radio
To switch to satellite radio operation:
From another main function
Select “Audio” K “Audio” K
“SatRadio”.
i If radio mode was active last, you only need
to select “Audio”.
Within the audio function
Select “Audio” K “SatRadio”.
The Satellite radio main menu will ap-
pear and displays the
Weather chan-
nel. You cannnot select any other
station.
Select “SatRadio” (from the submenu)
K “Service”.
The Service information display will ap-
pear.
Service information display
1Phone number of the provider,
(SIRIUS) or “Call Service Provider”
2SIRIUS ID of your satellite receiver
Contact satellite radio service provider
at the telephone number displayed in
the screen.
i It is also possible to activate the satellite
service online. To do so please visit SIRIUS Sat-
ellite Radio’s website at www.sirius.com (USA)
or www.siriuscanada.com (Canada)
After the connection is made:
Follow the instructions given by the op-
erator.
The activation process may take up to
10 minutes. If it is successful, you will
see the display with the message
“Acquiring Signal...” (
page 47) fol-
lowed by the Satellite radio main menu
(
page 47).
i If a subscription is not included with system
purchase, credit card information is required to
activate your account.
If a satellite receiver is not installed or not prop-
erly installed:
The message “Device Unavailable” will appear.
Subscribing
Page 48 of 225
47 Audio
Satellite radio*
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. the (, &, $ or % but-
tons, for selecting a channel or a menu or scroll-
ing through lists (
page 23).
Switching on
See “Subscribing to satellite radio” for im-
portant subscription information
(
page 46).
From another main function
Select “Audio” K “Audio” K
“SatRadio”.
i If radio mode was active last, you only need
to select “Audio”.
Within the audio function
Select “Audio” K “SatRadio”.
i No Satellite receiver:
The message “No Satellite Radio”
will appear in
a window.
The message will appear at start up or
when the signal is not available.
After the COMAND acquires the signal, the
Satellite radio display will appear. The sta-
tion last tuned to will begin to play.Satellite radio main menu
1SatRadio main display
2Channel name
3Memory preset number
4Selected category/channel number
5Channel info (short)
6Sound settings
7Category list
8Channel info (detailed)
9Preset channel list
aSatRadio menu
i You can display 5 in full:
Channel info (page 50)
Satellite radio operation
Page 51 of 225
50 Audio
Satellite radio*
Storing via Autostore
i The function automatically assigns receiv-
able channels to the presets. The channels
which were stored in the channel memory man-
ually will be overwritten in this process.
Press n if the display/selection win-
dow is active.
Select “Autostore”.
or
Select “Presets” K “Autostore” from
the SatRadio submenu.
COMAND searches for receivable
channels. A corresponding message is
displayed. The available channels are
automatically stored under the presets.
Cancelling storage procedure
Select “Cancel”.Selecting a channel from the memory
list
To call up the channel list:
In the submenu rotate ymz or slide
omp until “Presets” is highlighted.
The presets list appears.
To select a channel: Rotate ymz or
slide qmr.
To tune to the selected channel:
Press n.
or
Press a number key, e.g. 4, on the
control unit.
Displaying information
In the submenu rotate ymz or slide
omp until “Info” is highlighted.
Press n.
Information about the current program
appears.1Category
2Channel
3Artist
4Song title
You will see (if available)
the full name
additional information
Switching back to the SatRadio main dis-
play:
Slide omp.
Page 52 of 225
51 Audio
Satellite radio*
Displaying service information
You can call the provider service center for
questions or releases whenever you need.
Select “SatRadio” K “Service” in the
SatRadio submenu.
The service information appears.
1Phone number of the provider,
(SIRIUS) or “Call Service Provider”
2SIRIUS ID of your satellite receiver
Slide omp to switch back to the SatRa-
dio main display.
Channel list updates
While receiving a new channel list the mes-
sage “Updating Channels” will appear.
The channel last tuned will be muted until
the update is completed. You cannot oper-
ate the satellite radio.
After completion of the update, the
Satellite radio main menu will appear.
The channel last tuned to will begin to play.Sound settings
Refer to chapter “At a glance” on how to
adjust sound settings.
Volume (page 35)
Balance control and fader (page 36)
Bass and treble control (page 36)
Surround sound (page 38)
Page 53 of 225
52 Audio
CD audio/DVD audio and MP3
Permissible storage media
CD-R and CD-RW
DVD+R and DVD+RW
DVD-R and DVD-RW
PCMCIA memory card (page 57)
Permissible file systems
ISO9660/Joliet for CD storage media
UDF for DVDs
FAT16 or FAT32 for PCMCIA memory
card with storage medium
Multisession CDs
On multisession CDs, the content of the
first session determines how COMAND
handles the CD.
If the first session, for example, contains
data in audio CD format and the second
session contains MP3 tracks, COMAND
handles the CD as a conventional audio
CD. This means that the MP3 tracks can-
not be accessed.Similarly, if the first session contains MP3
tracks and the second session contains
d a t a i n a u d i o C D f ormat, COMAND handles
the CD as an MP3 CD. Only the MP3 tracks
can be accessed.
File structure of storage medium
When creating an MP3 storage medium,
you can organize MP3 tracks into folders.
A folder can also contain additional fold-
ers. A storage medium may have a maxi-
mum of 255 folders in total. A maximum of
255 tracks and 255 folders are permissible
per folder. A maximum of 4000 tracks in
total are permissible per storage medium.
Track names and folder names
When creating an MP3 storage medium,
you can assign names to the MP3 tracks
and to the folders.
COMAND uses these names in MP3 mode
for the corresponding display. Empty fold-
ers or folders containing data other than
MP3 tracks will not be displayed by
COMAND.
If MP3 files are stored in the root directory
itself, the root directory also counts as a
folder. COMAND will then display the root
directory name as a folder name.
CD audio/DVD audio and MP3
Safety instructions
G Warning
COMAND is classified as a Class 1 laser
product. You must not open the casing.
There is a risk of exposure to invisible laser
laser radiation if you open the casing, or if
the casing is faulty or damaged.
COMAND does not contain any parts that
you are able to maintain yourself. For safety
reasons, all maintenance work must be car-
ried out by qualified technicians.
G Warning
Only carry out the following when the vehi-
cle is stationary:
Inserting a disc
Ejecting a disc
There is a risk of accident by being distract-
ed from road and traffic conditions if you
load a CD/DVD while the vehicle is in mo-
tion.
Notes on MP3 mode
Page 54 of 225
53 Audio
CD audio/DVD audio and MP3
Please note the following when assigning
track names:
Track names must contain at least one
character.
Track names must have the extension
“mp3”.
A period must appear between the
track name and the extension.
i COMAND does not support ID3 tags.
Permissible MP3 formats
COMAND supports the MPEG1 audio
layer 3 format.
i In everyday speech, this format has been re-
placed by the designation “MP3”.
Permissible bit and scan rates
Fixed and variable bit rates from
32 kbps to 320 kbps
Scan rates from 8 kHz to 48 kHz
i Only use MP3 tracks with a bit rate of 128
kbps or higher and with a scan rate of 44.1 kHz
or higher. Lower rates may result in impaired
sound quality. This is particularly true if the sur-
round sound function has been activated.
Notes on copyright
The music tracks that you can create for
playback in MP3 mode are generally copy-
right-protected under applicable interna-
tional and national laws.
In many countries,the reproduction of
copyrighted material is not permitted even
if only for personal use without the express
prior consent of the copyright holder.
Please check the current copyright laws
for your country and comply with them.
These restrictions do not apply, for exam-
ple, to your own compositions and record-
ings or for recordings for which
authorization has been obtained from the
copyright holder.
Notes about audio DVD discs
COMAND can playback commercially
available, prerecorded audio DVDs that
bear the following label. You will usually
find the label on the DVD booklet, the inlay
or the DVD itself.
i Audio DVDs differ from recordable DVD-R
and DVD-RW discs.
Data on audio DVDs are stored either in
uncompressed format or in lossless com-
pressed format. The sound quality on au-
dio DVDs is therefore better than on
recordable DVDs that contain MP3 data
because the MP3 format uses a lossy type
of compression. You cannot delete data
from or record additional data to commer-
cially available, prerecorded audio DVDs.
Please note the following information
about CDs/DVDs and pay special atten-
tion to the notes on copied and/or self-
written CDs/DVDs.
Other readable audio formats
COMAND can also read music files in the
WMA (Windows
® Media Audio), AAC (Ad-
vanced Audio Coding) and WAV (Waveform
Audio Format) formats.
i If other music files are stored in these audio
formats on a storage medium, in addition to MP3
files, the loading process may take longer before
the first track is played.