phone MERCEDES-BENZ C-Class 2008 W204 Comand Manual

25 At a glance
Multifunction steering wheel
Multifunction display menus
MenusFunctions and submenus
Navi (page 26)
Navigation messages
Audio (page 27)
Selecting radio stations

Operating the DVD changer/Music register /Memory card
Tel (page 29)
Accepting a call

Selecting a phone book entry

Calls dialed

29 At a glance
Multifunction steering wheel
You can use the functions in the “Tel”
menu to operate your mobile phone.
Switch on COMAND;
Select the “Tel” menu.
Mobile phone status

If the mobile phone is switched on and
authorized, the message “Phone Rea-
dy” appears in the multifunction dis-
play.

If the mobile phone is not authorized or
authorized but switched off, the mes-
sage “Ready for Bluetooth Telephony…”
appears in the multifunction display.

If the mobile phone is authorized but
locked it is not possible to dial and the
message “No Service” appears in the
multifunction display.
Accepting a call
If someone calls you while you are in the
Tel menu, the following message appears
in the multi-function display:
Press s to answer a call.
You can also take a call if you have not se-
lected the “Tel” menu.
Rejecting or ending a call
Press t
You can also not take or end a call if you
have not selected the “Tel” menu.
Tel menu
G Warning
Some jurisdictions prohibit the driver from
using a cellular telephone while driving.
Whether or not prohibited by law, for safety
reasons, the driver should not use the cellu-
lar telephone while the vehicle is in motion.
Stop the vehicle in a safe location before
placing or answering a call.
If you nonetheless choose to use the mobile
phone while driving, please use the hands-
free feature and be sure to pay attention to
the traffic situation at all times. Use the mo-
bile phone only when road, weather and traf-
fic conditions permit. Otherwise, you may
not be able to observe traffic conditions and
could endanger yourself and others.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
G Warning
Never operate radio transmitters equipped
with a built-in or attached antenna (i.e. with-
out being connected to an external antenna)
from inside the vehicle while the engine is
running. Doing so could lead to a malfunc-
tion of the vehicle’s electronic system, pos-
sibly resulting in an accident and/or
personal injury.

30 At a glance
Multifunction steering wheel
Dialling a number from the phone book
If your mobile phone is able to receive
calls, you can search for and dial a number
from the phone book in COMAND at any
time.
i You can enter new numbers in the phone
book using COMAND (
page 105)..
Select the “Tel” menu.
The multi-function display shows
“Phone ready”.
Press %, $ or # to call up the
phone book.
Press % or $ to select the name
you are searching for.
The stored names are displayed in al-
phabetical order.
If only one telephone number is stored
for a name: press
s or # to
start dialling.
The message “Connecting call” and the
selected number appear in the multi-
function display. The name also ap-
pears, provided it is stored in the phone
book. The selected number is stored in
the “Calls Dialed” list in COMAND
(
page 97).If a call is connected, the phone book
entry appears in the multi-function dis-
play.
or
If there is more than one number for
a particular name: press
s or
# to display the numbers.
Press % or $ to select the num-
ber you want to dial.
Press s or # to start dialling.
The message Connecting call and the
selected number appear in the multi-
function display. The name also ap-
pears, provided it is stored in the phone
book. The selected number is stored in
the “Calls Dialed” list in COMAND.
If a call is connected, the phone book
entry appears in the multi-function dis-
play.
i To exit the phone book without making acall,
press the t button. “Phone ready” appears
in the multifunction display.
i If you press and hold the % or $ but-
ton for more than one second, the on-board
computer scrolls through the names rapidly. Af-
ter four seconds, the rapid scroll speeds up. The
rapid scroll stops when you release the button or
reach the end of the list.
Redialing
The on-board computer saves the most re-
cently dialled names and numbers from
the mobile phone. This means that you do
not have to search through the entire
phone book.
Select the “Tel” menu.
The multi-function display shows
“Phone ready”.
Press s to go to the most recently
dialled number or name in the “Calls Di-
aled” menu.
Press % or $ to select the num-
ber or name you are looking for.
Press s or # to start dialling.

33 At a glance
Operating COMAND
Switching to the list without predictive
speller
If other entries for a town exist, or the
name exists more than once in the system,
then
B is highlighted in the speller.
Press n.
You can switch to the list at any point while
entering characters.
Slide qmr repeatedly until the list ap-
pears without the speller.
or
Select B and press n.
COMAND will complete your entry if
the name is unambiguous. In this case
it is not necessary to switch to the list,
the Enter Destination menu will appear.
Selecting a list entry
Town list for navigation
1+ symbol for additional options
To select a town: Rotate ymz or slide
qmr.
To confirm selection: Press n.
A town with the 1 symbol exists more
than once in the selected country. Con-
firming this type of town will result in a
further selection. The
+ symbol then
switches to
/.
Switching to radio mode and request-
ing the station list
Initial situation:
You would like to switch, for example, from
the phone function to radio mode and re-
quest the station list from there.
i In this guide, the path to a menu item is
shown as an action in italics.
“Audio” K “Audio” K “Radio” K “Radio”
K “Station List”
i Depending on the initial situation, this se-
quence of actions may be shorter.
If radio mode was active last, it is sufficient to se-
lect “Audio”
K““Radio””K “Station List”.
The individual steps for the above example
are described below.
Operating example

35 At a glance
Basic functions of COMAND
i The COMAND components can be found on
(
page 14). Operating examples can be found
on (
page 31).
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. for volume setting the æ, ç
buttons, (
page 23).
Press the rotary/push button x.
or
Press the display cover button
The cover opens up and the
COMAND display folds out. A warning
message appears. COMAND opens the
last active menu.
i When COMAND is switched off, playback of
the current audio or video source is also
switched off.
To switch on/off: Press V.
The sound from the active audio or
video source is switched on or off.
i When the sound is switched off, the symbol
X appears in the status line.
If you change the audio or video source or alter
the volume, the sound is automatically switched
on again.
i Announcements from the navigation system
can still be heard with the sound switched off.
Switching navigation announcements
on/off
Press V during the announcement.
i The navigation announcements are
switched on again after restarting route guid-
ance or after switching COMAND off/on using
x.
To set: Turn the rotary/push button
x.
The volume of the selected audio or
video source changes.
Volume of navigation announcements
You can set the volume for navigation an-
nouncements independently of the volume
for the active audio or video source.
During a navigation announcement:
Turn the rotary/push button x.
Setting volume for phone calls
The volume for hands-free operation can
be set during an active phone call.
Turn the rotary/push button x.
Basic functions of COMAND
Switching COMAND on/off
Mute
Setting the volume

46 Audio
Satellite radio*
Subscribing to satellite radio
To switch to satellite radio operation:
From another main function
Select “Audio” K “Audio” K
“SatRadio”.
i If radio mode was active last, you only need
to select “Audio”.
Within the audio function
Select “Audio” K “SatRadio”.
The Satellite radio main menu will ap-
pear and displays the
Weather chan-
nel. You cannnot select any other
station.
Select “SatRadio” (from the submenu)
K “Service”.
The Service information display will ap-
pear.
Service information display
1Phone number of the provider,
(SIRIUS) or “Call Service Provider”
2SIRIUS ID of your satellite receiver
Contact satellite radio service provider
at the telephone number displayed in
the screen.
i It is also possible to activate the satellite
service online. To do so please visit SIRIUS Sat-
ellite Radio’s website at www.sirius.com (USA)
or www.siriuscanada.com (Canada)
After the connection is made:
Follow the instructions given by the op-
erator.
The activation process may take up to
10 minutes. If it is successful, you will
see the display with the message
“Acquiring Signal...” (

page 47) fol-
lowed by the Satellite radio main menu
(

page 47).
i If a subscription is not included with system
purchase, credit card information is required to
activate your account.
If a satellite receiver is not installed or not prop-
erly installed:
The message “Device Unavailable” will appear.
Subscribing

51 Audio
Satellite radio*
Displaying service information
You can call the provider service center for
questions or releases whenever you need.
Select “SatRadio” K “Service” in the
SatRadio submenu.
The service information appears.
1Phone number of the provider,
(SIRIUS) or “Call Service Provider”
2SIRIUS ID of your satellite receiver
Slide omp to switch back to the SatRa-
dio main display.
Channel list updates
While receiving a new channel list the mes-
sage “Updating Channels” will appear.
The channel last tuned will be muted until
the update is completed. You cannot oper-
ate the satellite radio.
After completion of the update, the
Satellite radio main menu will appear.
The channel last tuned to will begin to play.Sound settings
Refer to chapter “At a glance” on how to
adjust sound settings.
Volume (
page 35)
Balance control and fader (
page 36)
Bass and treble control (
page 36)
Surround sound (
page 38)

83 Telephone
General information ......................85
Activating the mobile phone ........86
Submenu overview .......................91
COMAND phone book ...................93
Call lists ..........................................97
Making calls ................................ 101
Address book .............................. 104

84 Telephone
Safety Precautions
Safety Precautions
G Warning
Some jurisdictions prohibit the driver from
using a cellular telephone while driving.
Whether or not prohibited by law, for safety
reasons, the driver should not use the cellu-
lar telephone while the vehicle is in motion.
Stop the vehicle in a safe location before
placing or answering a call.
If you nonetheless choose to use the mobile
phone while driving, please use the hands-
free feature and be sure to pay attention to
the traffic situation at all times. Use the mo-
bile phone only when road, weather and traf-
fic conditions permit. Otherwise, you may
not be able to observe traffic conditions and
could endanger yourself and others.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
G Warning
You and others may damag e y o u r h e a l t h d u e
to excessive electromagnetic radiation. By
using an external antenna, the possible
health risks of electromagnetic fields, which
are under discussion among the scientific
community, should be largely prevented.
G Warning
Never operate radio transmitters equipped
with a built-in or attached antenna (i.e. with-
out being connected to an external antenna)
from inside the vehicle while the engine is
running. Doing so could lead to a malfunc-
tion of the vehicle’s electronic system, pos-
sibly resulting in an accident and/or
personal injury.

85 Telephone
General information
The telephone function via the Bluetooth®
interface is available in conjunction with a
Bluetooth-enabled mobile phone.
With a suitable mobile phone, you can use
COMAND’s hands-free feature and receive
electronic business cards (vCards) via the
Bluetooth
® interface.
Further information on suitable mobile
phones and connecting Bluetooth-enabled
mobile phones to COMAND is available via
the Internet at www.mbusa.com.Interruptions to the connection may occur
if

there is inadequate GSM network cov-
erage in certain regions

you are switching from one GSM trans-
mitting/receiving station (GSM cell) to
another and there is no voice channel
available in this cell

you are using a SIM card that is not
compatible with the available network.

when using a mobile phone with “Twin-
card”, the mobile phone is simulta-
neously logged into the network with
the second SIM card.
If the mobile phone is connected with
COMAND via the Bluetooth
® interface, you
can operate the phone using the following
devices:

COMAND controller and keypad on the
COMAND control unit

Multifunction steering wheel

Voice ControlThe explanations in this section assume
that the mobile phone is connected to CO-
MAND via the Bluetooth
® interface. Excep-
tions are explicitly described.
Under the following circumstances, the
phone may not yet be useable:

If it is not yet logged into a network.
The phone will try independently to log
into a network. If no network is
available, you will not be able to make
“911” emergency calls.
If you try to make an outgoing call, the
message “No Service” appears briefly.
General information
Making calls via Bluetooth®
interface
Interruptions to the connection
while driving
Operating options
Functional restrictions