phone MERCEDES-BENZ C-Class 2008 W204 Comand Manual

106 Telephone
Address book
Cancelling an entry
Select A.
If one of the data fields contains new
data, you will be prompted to confirm
whether you wish to save the entry.
Select “Yes” or “No”.
The entry will be saved or discarded
on the basis of the selection.
Saving entry
Select B.
The address book displays the entry.
Open the address book (page 104)
and select “Search”.
If there are more than eight entries, the
search menu with the search speller
appears.
Search menu with search speller
1i symbol for address book entry
2Q symbol for complete address data
from navigation
3m symbol for voice tag
4Search speller
Entries without symbols or with the sym-
bols 1 and 3 are just address book en-
tries. A voice tag has additionally been
saved for entries with the symbol 3. En-
tries with the symbol 2 contain complete address data from the navigation system,
which support navigation and are covered
by the digital map data. You can quickly
start route guidance to this kind of entry
(
page 109).
Switching from search speller to the
list
Slide qm repeatedly or press and hold
n until the search speller is displayed.
or
Select B.
Switching from the list to the search
speller
Select A from the list.
Searching for an address book entry

107 Telephone
Address book
Searching
Searching via search speller
Switch if necessary from the list to the
search speller.
To change the search speller lan-
guage: Select !.
To switch search speller character
set: Select #.
Depending on the previous setting, this
switches it to letters with special char-
acters or numbers with special charac-
ters.
To enter characters: Select the char-
acters for the required entry one after
another.
To delete an individual character:
Select õ and briefly press n.
or
Press the î button next to the
COMAND controller.
After entering each character or after
each deletion of a character, the clos-
est matching entry is given at the top of
the list.
To delete an entire entry: Select
õ and press and hold n until the
entire entry has been deleted.
or
Press and hold î until the entire en-
try has been deleted.
To end search: Switch from the search
speller to the list.
The top list entry is highlighted auto-
matically.
Back to the address book: Switch if
necessary from the list to the search
speller and in the search speller select
A.
Searching via list
If necessary, switch from the search
speller to the list (
page 106).
Rotate ymz for so long or slide qmr
until the desired entry in the list is high-
lighted.
Search for the required entry
(
page 106).
Select “Options” K “Delete”.
A delete prompt appears.
Select “Yes” or “No”.
The entry will be deleted or retained on
the basis of the selection.
Switch from the search speller to the
list (
page 106).
or
Select an address book entry in the ad-
dress book (
page 104).
Press n.
The details screen appears.
Deleting entry
Displaying details for an address
book entry

108 Telephone
Address book
Details screen for private data
1Back to the previous menu
2Selected data field
3k symbol for private data
4Calls up options
5l symbol for business data
Selecting another data field
Rotate ymz or slide qmr.
Displaying abbreviated content in full
Select “Options” K “Details”.
The complete display appears.
To close complete display: Slide
omp or press n.
Closing details screen
Select “Back”.
Changing an address book entry
Search for an address book entry
(
page 106).
Select “Options” K “Change Entry”.
or
Display details for an address book en-
try.
Select “Options” K “Change Entry”.
The input menu with the data fields ap-
pears.
Continue from the step “Switching data
field” in the “Creating a new address
book entry” section (
page 105).
Changing category of a
phone number data field
Display the details for an entry and
highlight the phone number data field
(
page 107).
Select “Options” K “Change Catego-
ry”.
Select a number category, e. g.
“Home”.
Select a phone category, e. g.
“Mobile Phone”.
If necessary select “Preferred”.
Depending on the previous status, the
option will be switched on D or off C.
The phone number is displayed in the
phone book as the first number and
can be dialed immediately.
Select “Save”.
The new category is saved.
Changing entry

109 Telephone
Address book
i The mobile phone must be connected via
the Bluetooth® interface.
Display the details for an entry and
highlight the phone number data field
(
page 107).
Press n.
The phone initiates the call. The display
switches to the phone mode display.
or
Select “Options” K “Call”.
The phone initiates the call.
i You can use this function as soon as you
have saved a destination in the destination mem-
ory (
page 159). COMAND then also saves the
destination in the address book with the com-
plete address data that support navigation.
Search for an address book entry with
the Q symbol (
page 106).
Display the details for an entry and
highlight the address data field
(
page 107).
Press n.
i Pressing n only functions if the address
data field contains complete data that support
navigation. This is indicated by the Q symbol.
or
Select “Options” K “Navigate”.
i “Navigate” can only be selected if the ad-
dress data field contains complete data that sup-
port navigation. This is indicated by the Q
symbol.
1Address that supports navigation
2Opens Enter Destination menu
The Enter Destination menu appears,
the selector bar is located at the menu
item “Start” (
page 135).
Start the route calculation.
Initiating a phone call to an entryStarting navigation to an entry

110 Telephone
Address book
i Voice tags can be entered via Voice Control
System.
Adding or changing voice tag
i You can add one voice tag per address book
entry.
Search for an address book entry with-
out or with a voice tag (m display)
(
page 106).
Select “Options” K “Voice Name” K
“Add” or “Change”.
The process continues by voice com-
mands. The Voice Control System
guides you through the dialogs
(
page 176).
Deleting voice tag
Search for an address book entry with
a voice tag (
page 106).
Select “Options” K “Voice Name” K
“Delete”.
A delete prompt appears.
Select “Yes” or “No”.
COMAND will delete or retain the voice
tag on the basis of the selection.
Listening to voice tag
Search for an address book entry with
a voice tag (
page 106).
Select “Options” K “Voice Name” K
“Listen”.
You will hear the voice tag.You can import vCards from a PCMCIA
card into the address book.
i If there are no vCards stored on the PCMCIA
memory card, “Import External Data” is greyed
out.
Push the PCMCIA memory card into
the slot (
page 57).
The end with the contacts must be
pointing towards the slot.
From the Phone main menu:
Select “Phone” K “Import External Da-
ta”
K “Memory Card” on COMAND.
or from within the Address Book function
Select “Address Book” K “Import Ex-
ternal Data”
K “Memory Card” on CO-
MAND.
Press n.
The data import is started.
Voice tagsImporting vCards from a PCMCIA
card

141 Navigation
POI input
i It is only possible to enter a POI in the local
area of the destination when route guidance is
active.
In the map display with the menu sys-
tem displayed (
page 119) select
“Destination”
K “From POIs” K “Near
Destination”.
Continue by selecting the POI category
(
page 142).
In the map display with the menu sys-
tem displayed (
page 119) select
“Destination”
K “From POIs” K
“Current Position”.
Continue by selecting the POI category
(
page 142).Option 1
In the map display with the menu sys-
tem displayed (
page 119) select
“Destination”
K “From POIs” K
“Other City”.
If necessary proceed as described un-
der Selecting a state/province
(
page 127).
To enter a city: Select “City”.
The city input menu appears.
Proceed as described in the “Entering a
city” section (
page 127).
After entering the city, continue by se-
lecting the POI category (
page 142).
Option 2
Enter an address in the Enter Destina-
tion menu (
page 126).
Select “POI”.
Continue by selecting the POI category
(
page 142).
i This function gives you access to all POIs
that are available in the digital map.
In the map display with the menu sys-
tem displayed (
page 119) select
“Destination”
K “From POIs” K
“Search By Name”.
This displays a list of all POIs in the dig-
ital map and the predictive speller.
Continue as described in the “POI list
with predictive speller” section
(
page 146).
i This function gives you access to all POIs in
the digital map stored with a phone number.
In the map display with the menu sys-
tem displayed (
page 119) select
“Destination”
K “From POIs” K
“Search By Phone Number”.
This displays a list of all POIs in the dig-
ital map sorted by phone number and
the predictive speller.
Continue as described in the “POI list
with predictive speller” section
(
page 146).
POI input
Entering a POI in local area of desti-
nation
Entering a POI in the vicinity of the
location
Entering a POI in the vicinity of a
specific locationEntering a POI via a name search
Entering a POI via a phone number
search

142 Navigation
POI input
The categories and POIs available depend
on the area for which you wish to enter a
POI.

POI in local area of destination:
Alphabetically sorted categories and
POIs sorted by distance in the vicinity
of the destination location are avail-
able.

POI in the vicinity of the location:
Alphabetically sorted categories and
POIs sorted by distance in the vicinity
of the vehicle location are available.

POI in a particular city:
If you have only entered the country
and the city, alphabetically sorted cate-
gories and alphabetically sorted POIs
within the city limits are available.
If you have entered more than the
country and the city, alphabetically
sorted categories and POIs sorted by
distance in the vicinity of the address
entered are available.

POI via name search:
An alphabetically sorted list of all POIs
is available.

POI via phone number:
A numerically sorted list is available
Selecting a category
Depending on the number of available cat-
egories, the main category list is displayed
either with or without predictive speller
(
page 143).
Main category list with predictive spell-
er
If this list is given in the display, the
predictive speller 7 is activated automat-
ically.1Symbol for main category
2Characters entered by the user
3Characters automatically added by the
system
4List entry that best matches the
characters already entered
5Main category list
6Currently unavailable characters
7Predictive speller
8Currently selected character
9Currently available character
i In the predictive speller 7 you can only se-
lect characters that are currently available. The
characters that are available depends on those
already entered and the data for the digital map.
Choosing a POI category

145 Navigation
POI input
i If “ALL TYPES” is selected in the list, the POI
list contains all the POIs in all subcategories of
the “RESTAURANT” main category that are locat-
ed in the search radius. The list item “OTHER” at
the end of the list contains all the POIs not as-
signed to any subcategory in the “RESTAURANT”
main category that are located in the search ra-
dius.
The selected main category contains no
subcategories:
Selecting it immediately opens the POI list.
The POI list then contains the available
POIs for the main category that are located
in the search radius.
POI list
As an example, the illustration below
shows the POI list for the main category of
“RESTAURANT”, “BREWPUB” subcategory
in the vicinity of the location.1Direction of destination
2Air-line distance to the destination
3Point of interest
4Selected category or subcategoryi The display 1 only appears if you have en-
tered a POI search in the vicinity of the current
position.
The display
2 is not displayed if you have en-
tered a POI within a particular city and have only
entered the state/province and the city.
Depending on the POI category selected,
COMAND uses different reference points when
determining the distance to the destination:

In the vicinity of the location: The distance to
the POI from the current vehicle location.

Local area of destination: The distance to
the POI from the destination entered.
Selecting a POI
Select the desired POI.
The full address of the selected POI is
displayed.
i If the selected POI has a telephone book en-
try, you can make a call to the POI.
1POI with address
2Initiates a call, if available
3Starts route calculation
4Cancels selection
To cancel selection: Press the í
button.
or
Select “Back”.
The POI list appears.


153 Navigation
Route guidance
Route guidance from an off-road posi-
tion to a destination
If the vehicle location is within the area
covered by the digital map, but the map it-
self does not contain any information on
the location, the vehicle is in an off-road
position. COMAND can guide you from
such a position to a destination.
At the start of route guidance you will see
the message “Off Mapped Road”, an arrow
and the distance to the destination. The ar-
row indicates the direction of the actual
destination.
The blue marking for the route on the map
starts from the nearest road known to the
system.
As soon as the vehicle is travelling again on
a road known to the system, route guid-
ance continues in the usual manner.
Route guidance from an off-map posi-
tion to a destination
If the vehicle location is outside the area
covered by the digital map, then the vehi-
cle is in an off-map position.
COMAND can guide you from such a posi-
tion to a destination.At the start of route guidance you will see
the message “Off Map”, an arrow and the
distance to the destination. The arrow indi-
cates the direction of the actual destina-
tion.
The blue marking for the route on the map
starts from the nearest road known to the
system.
As soon as the vehicle is travelling again on
a road known to the system, route guid-
ance continues in the usual manner.
Off-road during route guidance
The actual path of the road may deviate
from the data in the digital map due to road
works.
In cases like this, the system is temporarily
not able to locate the vehicle location on
the digital map; the vehicle is thus in an off-
road position.
The display then shows the message “Off
Mapped Road”, an arrow and the distance
to the destination. The arrow indicates the
direction of the actual destination.
As soon as the vehicle location is found
again, route guidance continues in the usu-
al manner.
i During an active telephone call, the naviga-
tion announcements are suppressed.
If you missed an announcement, you can
request a current announcement at any
time.
To request current announcement:
Select “Navi”
K 6.
or
In the map display with the menu sys-
tem displayed (
page 119) select
6.
To switch off navigation announce-
ments: Press
V during the announce-
ment.
Navigation announcements
G Warning
Navigation announcements are intended to
direct you while driving without diverting
your attention from the road and driving.
Please always use this feature instead of
consulting the map display for directions.
Consulting the symbols or map display for
directions may cause you to divert your at-
tention from driving and increase your risk
of an accident.


161 Navigation
Destination memory
If necessary switch to navigation mode
and display menu system
(
page 118).
Select “Destination” K “From Memo-
ry”.
If there are more than 8 entries in the
destination memory, the destination
memory list with predictive speller
(
page 136) is displayed, otherwise
the destination memory list is dis-
played without predictive speller
(
page 137).
Select destination you want. Proceed
as described for entering a destination
in the “Entering a destination from the
destination memory” section
(
page 135).
Select “Options” K “Delete”.
You will be prompted to confirm that
you wish to delete the destination.
Select “Yes” or “No”.
If you select “Yes” COMAND deletes
the destination. A message will be dis-
played.
i If the address data, which support naviga-
tion, for the destination to be deleted has also
been assigned to an address book entry,
COMAND deletes this data there too. If the cor-
responding address book entry does not contain
any other data, e. g. phone numbers, COMAND
deletes the entire address book entry.Deleting destination or home address
from the destination memory