Window MERCEDES-BENZ C-Class 2008 W204 Comand Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2008, Model line: C-Class, Model: MERCEDES-BENZ C-Class 2008 W204Pages: 225, PDF Size: 3.26 MB
Page 35 of 225
34 At a glance
Operating COMAND
Switching to the current audio mode
To switch to the main function line:
Slide
qm.
To select “Audio” main function: Ro-
tate
ymz or slide omp.
To confirm selection: Press n.
The main display for the audio mode
selected last, e.g. CD audio, appears.
The selector bar is located in the dis-
play/selection window.
1Selector bar
Switching to radio mode
i You can also call up the required audio
mode directly using the
X or y buttons.
To select “Audio” again: Slide qm.
To confirm selection: Press n.
The “
Audio” menu appears.
To select “FM / AM Radio”: Rotate
ymz or slide qm.
To confirm selection: Press n.
The radio main display appears.
Tuning to a station manually
Slide qmr to highlight the lower menu
bar.
Rotate ymz or slide omp to select
“
FM” or “AM”.
Tune to a station by rotating ymz or
sliding
omp.
The red line (tuning indicator) moves
right or left and stops when a receiv-
able station is found.
Page 41 of 225
40 Audio
Radio
i Information on the COMAND control system
and how to operate it can be found on
(
page 14) and (page 31).
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. the (, &, $ or % but-
tons, for selecting a station or a menu or scroll-
ing through lists (
page 23).
From the COMAND control unit
Press the X function button.
i Press the button repeatedly to switch wave-
band in the sequence FM, AM, WB (
page 42)
and SatRadio* mode (
page 45). Pressing
again will switch back to FM radio mode.
From the COMAND controller
From another main function
Select “Audio” K “Audio” K “FM / AM
Radio” in the display.
i If radio mode was active last, you only need
to select “Audio”.
Within the audio function
Select “Audio” K “FM / AM Radio”.The radio display appears. The last se-
lected station in the last selected wave-
band is heard.
Display with Audio menu
1Main function line
2Audio menu
3Current audio mode
i You can switch to the various audio modes
in the audio menu:
FM / AM radio mode
SatRadio* mode (page 45)
CD-/DVD audio/MP3 mode (“Disc” and
“Memory Card” are described together in
this guide), (
page 60)
Music Register (page 67)
Aux mode (page 71)Radio display
1Display/selection window with station
or frequency
2Memory preset number
3Name or frequency of selected station
4Sound settings
5WB (Weather band)
6AM radio
7FM radio
8Stored station list
9Radio functions
Radio
Switching to the radio
Page 43 of 225
42 Audio
Radio
You can switch the radio between the FM,
AM, and WB wavebands.
Select “FM” 7, “AM” 6 or “WB” 5 in
the radio display.
The last selected station in the select-
ed waveband is heard.
i In the WB waveband, COMAND displays the
Channel name instead of the station names
and/or frequency.
or
Press the X function button on the
control unit repeatedly until the desired
band is selected.
i Press the button repeatedly to switch wave-
band in the sequence of FM, AM, WB and
SatRadio* mode (
page 47). Pressing again will
switch back to FM radio mode.
You can tune to a station via station search
or by manual frequency input.
Tuning to a station via station search
Rotate ymz or slide omp if the dis-
play/selection window is highlighted.
or
Press G or H on the COMAND
control unit.
The search proceeds upwards or down-
wards and stops at the next receivable
station.
Tuning to a station via manual
frequency input
Select “Radio” K “Enter Frequency” in
the radio display.
An input menu appears.
or
Press ß on the control unit.
To enter a frequency: Press number
buttons on the control unit.
i You can only select numbers that are cur-
rently permissible.
COMAND will tune to the frequency en-
tered.
i If in the FM or AM wavebands you enter a
frequency outside the frequency sub-range, CO-
MAND will select the next frequency down.
Tuning to a station via the station
memory
Select “Presets” in the radio display.
or
Press n if the display/selection win-
dow is highlighted.
The station memory appears. The
dotR in front of a preset indicates that
the currently tuned station is stored
there.
To select a station: Rotate ymz or
slide qmr.
To tune to a station: Press n.
or
Press a number key, e.g. 4, on the
control unit.
Switching wavebands Tuning to a station
Page 45 of 225
44 Audio
Radio
Slide mr to highlight the submenu.
To select the weather band:
Rotate ymz or slide omp until “WB” is
highlighted.
Press n.
1Display selection window
2Currently received channel
3Sound settings
4Weather band
5AM radio
6FM radio
7Channel list
Searching a channel
Rotate ymz or slide omp if the dis-
play/selection window is highlighted.
or
Press G or H on the control unit.
The search proceeds upwards or down-
wards and stops at the next receivable
channel.
Selecting a channel from channel list
Slide mr to highlight the submenu.
To call up the channel list:
Rotate ymz or slide omp until
“Channel” is highlighted.
Press n.
The channel list appears.
To select a channel: Rotate ymz or
slide qmr.
To tune to the selected channel:
Press n.
or
Press a number key, e.g. 4, on the
control unit at any time.
Switching to weather band
Page 48 of 225
47 Audio
Satellite radio*
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. the (, &, $ or % but-
tons, for selecting a channel or a menu or scroll-
ing through lists (
page 23).
Switching on
See “Subscribing to satellite radio” for im-
portant subscription information
(
page 46).
From another main function
Select “Audio” K “Audio” K
“SatRadio”.
i If radio mode was active last, you only need
to select “Audio”.
Within the audio function
Select “Audio” K “SatRadio”.
i No Satellite receiver:
The message “No Satellite Radio”
will appear in
a window.
The message will appear at start up or
when the signal is not available.
After the COMAND acquires the signal, the
Satellite radio display will appear. The sta-
tion last tuned to will begin to play.Satellite radio main menu
1SatRadio main display
2Channel name
3Memory preset number
4Selected category/channel number
5Channel info (short)
6Sound settings
7Category list
8Channel info (detailed)
9Preset channel list
aSatRadio menu
i You can display 5 in full:
Channel info (page 50)
Satellite radio operation
Page 54 of 225
53 Audio
CD audio/DVD audio and MP3
Please note the following when assigning
track names:
Track names must contain at least one
character.
Track names must have the extension
“mp3”.
A period must appear between the
track name and the extension.
i COMAND does not support ID3 tags.
Permissible MP3 formats
COMAND supports the MPEG1 audio
layer 3 format.
i In everyday speech, this format has been re-
placed by the designation “MP3”.
Permissible bit and scan rates
Fixed and variable bit rates from
32 kbps to 320 kbps
Scan rates from 8 kHz to 48 kHz
i Only use MP3 tracks with a bit rate of 128
kbps or higher and with a scan rate of 44.1 kHz
or higher. Lower rates may result in impaired
sound quality. This is particularly true if the sur-
round sound function has been activated.
Notes on copyright
The music tracks that you can create for
playback in MP3 mode are generally copy-
right-protected under applicable interna-
tional and national laws.
In many countries,the reproduction of
copyrighted material is not permitted even
if only for personal use without the express
prior consent of the copyright holder.
Please check the current copyright laws
for your country and comply with them.
These restrictions do not apply, for exam-
ple, to your own compositions and record-
ings or for recordings for which
authorization has been obtained from the
copyright holder.
Notes about audio DVD discs
COMAND can playback commercially
available, prerecorded audio DVDs that
bear the following label. You will usually
find the label on the DVD booklet, the inlay
or the DVD itself.
i Audio DVDs differ from recordable DVD-R
and DVD-RW discs.
Data on audio DVDs are stored either in
uncompressed format or in lossless com-
pressed format. The sound quality on au-
dio DVDs is therefore better than on
recordable DVDs that contain MP3 data
because the MP3 format uses a lossy type
of compression. You cannot delete data
from or record additional data to commer-
cially available, prerecorded audio DVDs.
Please note the following information
about CDs/DVDs and pay special atten-
tion to the notes on copied and/or self-
written CDs/DVDs.
Other readable audio formats
COMAND can also read music files in the
WMA (Windows
® Media Audio), AAC (Ad-
vanced Audio Coding) and WAV (Waveform
Audio Format) formats.
i If other music files are stored in these audio
formats on a storage medium, in addition to MP3
files, the loading process may take longer before
the first track is played.
Page 63 of 225
62 Audio
CD audio/DVD audio and MP3
In CD audio, DVD audio and
MP3 mode
To activate playback pause:
Briefly press I.
X appears at the top left of the status
bar.
To resume playback: Briefly press I
again.
X disappears.
In DVD audio mode only
To activate playback pause:
Switch to DVD audio mode.
Select g.
The g display changes to T.
To resume playback:
Switch to DVD audio mode.
Select T.
The T display changes to g.
In CD audio, DVD audio and MP3
mode: Select “Changer”.
or
In CD audio and DVD audio mode
only: Press n if the display/selection
window is highlighted.
The media list appears. The
dotR indicates the medium currently
playing.
Media list
The media list shows you the storage me-
dia currently available:
In the DVD changer (magazine com-
partments 1 to 6)
The following storage media can be
read:
J CD audio, L MP3-CD, K DVD
audio and I DVD video
i If a storage medium is not readable, an entry
appears next to the magazine compartment or a
message is displayed when the memory card is
selected.
PCMCIA memory card M at position 7
Music Register N at position 8
To select storage medium: Rotate
ymz or slide qmr.
Press n.
i If you select a video DVD I, then this
switches the unit to video mode (
page 77).
Pause functionSelecting CD/DVD/MP3 media
Page 64 of 225
63 Audio
CD audio/DVD audio and MP3
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. the (, &, $ or % but-
tons, for selecting a track or a menu or scrolling
through lists (
page 23).
Selection via track skip
To skip forwards or backwards to a
track: Rotate ymz.
or
Press G or H.
i ‘Forward track skip’ skips to the next track.
‘Backward track skip’ skips to the beginning of
the current track, if the track has been playing
for more than 8 seconds. If the track has been
playing for less than 8 seconds, it will skip to the
beginning of the previous track.
If the playback option “Random Tracks” is
switched on, the track sequence is random.
Selecting via track list
In CD audio/DVD audio mode: Select
“Track” or “Track List”.
or
In MP3 mode: Press n if the display/
selection window is highlighted.The track list appears. The dotRindi-
cates the current track.
To select a track: Rotate ymz or slide
qmr.
Press n.
i In MP3 mode the list displays all tracks in al-
phabetical order.
Display/selection window is high-
lighted: Slide and hold omp until the
desired point is reached.
or
Press and hold G or H on the
control unit until the desired point is
reached.
i The function is only available in MP3 mode.
Switch to MP3 mode (page 60).
Select “Folder”.
or
Press n if the display/selection win-
dow is highlighted.
The folder list appears.
1Back folder symbol
2Current track
3Track symbol
4Current folder name
Selecting tracks
Fast forward/reverse
Selecting folders
Page 67 of 225
66 Audio
CD audio/DVD audio and MP3
It is only possible to set the audio format in
DVD audio mode. The number of available
audio formats is dependent on the DVD.
The content of an audio DVD is called the
‘album’, which can be divided into a maxi-
mum of nine groups. A group may contain,
for example, music of different sound qual-
ities (stereo and multi-channel formats) or
bonus tracks. Each group can include up to
99 tracks. If a DVD audio only comprises
one audio format, the “Group” menu
item(s) cannot be selected.
Switch to DVD audio mode
(
page 60).
Select “DVD-A” K “Group”.
The list of available audio formats ap-
pears. A dotRindicates the format
currently selected.
To change setting: Rotate ymz or
slide qmr.
Press n.
To exit menu: Slide omp.The following options are available:
“Normal Track Sequence”
You will hear the tracks in the normal
sequence (e. g. track 1, 2, 3 etc.).
“Random Tracks”
You will hear the tracks in random or-
der (e. g. track 3, 8, 5 etc.).
“Folder” (only in MP3 mode)
The tracks in the currently active folder
and any subfolders are heard in ran-
dom order.
To select an option: Switch to CD au-
dio, DVD audio or MP3 mode
(
page 60).
Select “CD” or “DVD-A” or “MP3”.
The Options list appears. A dotRindi-
cates the activated option.
Select an option.
The option is activated. A correspond-
ing display will appear in the display/
selection window for all options except
“Normal Track Sequence”.
i The option “Normal Track Sequence” is au-
tomatically activated if you change the medium
which is currently being played or if you select
another medium. An activated option remains
active after COMAND is switched on or off.
Setting audio formatPlayback options
Page 70 of 225
69 Audio
Music Register
Start the reording
Rotate ymz or slide omp until “Start”
is highlighted.
Press n.
In the display information about
source, destination and progress of the
recording is shown.
i The Disc menu re-appears automatically af-
ter a sucessful recording.
To stop the recording: Rotate ymz or
slide omp until “Cancel” is highlighted.
Press n.
The Disc menu re-appears.This function can be used to delete all the
music files in the Music Register.
Select “Music Register” K “Delete All
Music Files”.
A prompt appears. “No” is highlighted.
Do not delete: Press n.
The Music Register menu appears.
To delete: Select “Yes”.
A corresponding message appears.
Select “Music Register” K “Memory In-
fo”.
A window appears containing informa-
tion on:
Memory capacity
Available memory
Occupied memory
Content (folders, tracks)You can view the content of the Music Reg-
ister, change folder/track names and de-
lete individual folders/tracks.
Select “Folder” in the submenu.
1Back folder symbol
2Music file symbol
3Current folder
or
Press n if the display/selection win-
dow is highlighted.
A similar list appears that also shows
the content of the music register.
Deleting all music files
Requesting memory space informa-
tion
Folder functions