steering MERCEDES-BENZ C CLASS 2019 User Guide

Adjusting thesteering wheel electrically
Thesteering wheel can be adjusted whenthepower supplyis switched off.
1Adjuststhe distancetothesteering wheel
2Adjuststhe height
Savethe settings withthe memory function(page102).
Switchingthesteering wheel heater on or off
Requirements:RThe ignition is switched on.
Turnthe lever inthe direction of arrow1or2.If indicator lamp3lights up,thesteeringwheel heater is switched on.
Whenyou switch the ignition off,thesteeringwheel heater switches off.
Easy entry andexitfeature
Usingthe easy entry andexitfeature
\nWARNINGRisk of accident when drivingoff while adjustingthe easyexitfeature
‑ Ifyou drive off whilethe easy entryandexitfeature is making adjustments,you couldlose control ofthevehicle.
Alwayswait untilthe adjustment proc‐ess is completebefore driving off.
\nWARNINGRisk of becoming trappedwhile adjustingthe easy entryandexitfeature
Whenthe easy entryandexitfeature adjuststhesteering wheel,you andothervehicleoccupants – particularlychildren – couldbecome trapped.
Seats andstowing101

Duringthe adjustment process oftheeasy entryandexitfeature, make surethat no one has any body parts inthesweep ofthesteering wheel.
Movethe adjustment lever ofthesteer‐ing wheel ifthere is arisk of becomingtrappedbythesteering wheel.The adjustment process isstopped.
\nWARNINGRisk of becoming trappedduring activation ofthe easy entryandexitfeaturebychildren
Ifchildren activatethe easy entryandexitfeature,theycan become trapped, particu‐larlywhen unattended.
Never leavechildren unattended inthevehicle.
When leavingthevehicle, alwaystakethe SmartKeywithyou and lockthevehicle.
Vehicles with memory function:You canstopthe adjustment processbypressing one ofthememory function position buttons.
Ifthe easy entryandexitfeature is active,thesteering wheel will moveupwards ortowardsthedashboard inthefollowing situations:
Ryou switchthe ignition off
Ryou openthe driver's door
Thesteering wheel moves upwards andtowardsthe dashboard only if it has notalreadyreachedthesteering limiter.
Thesteering wheel moves backtothe last driveposition inthefollowing cases:
Ryou closethe driver's door whenthe ignitionis switched on
Ryou pressthestart/stop button once.
The last drive position isstored inthefollowingsituations:
Ryou switchthe ignition off
Ryou savethe setting withthe memory func‐tion
Ifyou press one ofthe memory function positionbuttons,the adjustment process isstopped.
Settingthe easy entry andexitfeature
Multimedia system:
VehicleîVehicle SettingsEasy Entry/Exit
SelectSteering Wheel & Seat,SteeringWheel OnlyorOff.
Operatingthe memory function
\nWARNINGRisk of an accident ifthememory function is used while driving
Ifyou usethe memory function onthe driv‐er's side while driving,you could lose controlofthevehicle as aresult ofthe adjustmentsbeing made.
Only usethe memory function onthedriver's side whenthevehicle isstation‐ary.
102Seats andstowing

\nWARNINGRisk of entrapment when set‐tingthe seat withthe memory function
Whenthe memory function adjuststhe seatorsteering wheel,you andothervehicleoccupants – particularlychildren – couldbecome trapped.
Duringthe setting procedure ofthememory function, ensurethat no bodyparts are inthe sweep ofthe seat orthesteering wheel.
If somebody becomes trapped, immedi‐atelyreleasethe memory function posi‐tion button.The adjustment process isstopped.
\nWARNINGRisk of entrapment ifthememory function is activatedbychildren
Children could become trapped iftheyacti‐vatethe memory function, particularly whenunattended.
Never leavechildren unattended inthevehicle.
When leavingthevehicle, alwaystakethekey withyou and lockthevehicle.
The memory function can be used whenthe igni‐tion is switched off.
StoringSeat adjustmentsfor uptothree people can bestored and called up usingthe memory function.
Thefollowing systems can be selected:
RSeat, backrest and headrestraint
RSteering wheel
ROutside mirrors
RHead-up Display
Setthe seat,thesteering wheel,the Head-upDisplay andthe outside mirrorstothedesired position.
Press memory button M andthen press pre‐set position button1,2 or 3 withinthree sec‐onds.An acoustic signal sounds. The settings arestored.
Seats andstowing103

Tocall up:press and holdtherelevant pre‐set position button1,2 or 3 untilthe frontseat,thesteering wheel, Head-up Displayand outside mirror are inthestored position.
Whenyoureleasethe preset position button,steering wheel,the seat and mirror settingfunctionsstop immediately.The Head-upDisplay continuestobe adjusted.
Stowage areas
Notes on loadingthevehicle
\nDANGERRisk ofexhaustgas poisoning
Combustion engines emit poisonousexhaustgases such as carbon monoxide. Exhaustgases can enterthevehicle interior ifthetrunk lid is open whenthe engine isrunning,especially ifthevehicle is in motion.
Always switch offthe engine beforeopeningthe trunk lid.
Never drive withthe trunk lid open.
\nWARNINGRisk of injuryfrom unsecureditems inthevehicle
If objects, luggage or loads are not securedor not secured sufficiently,theycould slip,tipover or bethrown around andthereby hitvehicle occupants.
There is arisk of injury,particularly intheevent of sudden braking or a suddenchangein direction.
Alwaysstowobjects in such awaythattheycannot bethrown around.
Beforethe journey,secure objects, lug‐gageor loads against slipping or tippingover.
\nWARNINGRisk of injuryduetoobjectsbeingstowed incorrectly
Ifyou do not adequatelystowobjects inthevehicle interior,theycould slip or betossedaround andtherebystrikevehicle occupants.In addition, cup holders, openstowagespaces and mobile phone brackets cannot
alwaysrestrainthe objectstheycontain intheevent of an accident.
There is arisk of injury,particularly intheevent of sudden braking or a suddenchangein direction.
Alwaysstowobjects in such awaythattheycannot betossed about inthese orsimilar situations.
Always make surethat objects do notproject fromstowage spaces, parcelnets orstowage nets.
Closethe lockablestowage spacesbeforestarting a journey.
Alwaysstowand secure objectsthatare heavy, hard, pointed, sharp-edged,fragile ortoo large inthe trunk.
\nWARNINGRisk of burning fromthetail‐pipe ortailpipe trim
Thetailpipe andtailpipe trim can becomeveryhot. Ifyou come into contact withthesecar parts,you could burnyourself.
104Seats andstowing

Openingthestowagespace underthe trunkfloor
NOTEDamagetothe handle inthe trunkfloor
Ifthe handle inthe trunk is left protruding,the handle may be damaged.
Unhingethe handle beforeyou closethe trunk lid and pressthe handleclosed again.
Pull handle1up and hook it into driprail2.
Attachingtheroof carrier
\nWARNINGRisk of injuryifthe maximumroof load isexceeded
Whenyou loadtheroof,the center of gravityofthevehiclerises andthe usual drivingcharacteristics aswell asthesteering andbrakingcharacteristicschange. During cor‐nering,thevehicle tilts morestrongly andmayreact more sluggishlytosteering move‐ments.
Ifyouexceedthe maximumroof load,thedrivingcharacteristics, aswell asthesteer‐ing and brakingcharacteristics, will begreatlyimpaired.
Always comply withthe maximumroofload and adjustyour drivingstyle.
You willfind information onthe maximumroofload inthe "Technical data" section.
Seats andstowing11 3

Activating/deactivating the hazardwarninglights
Press button1.
Cornering light
Cornering light function
The cornering light improvesthe illumination oftheroadwayover a wide angle inthe turningdirection, enabling better visibility on tightbends,forexample. It can be activated onlywhenthe low beam is switched on.
The function is active:
RAtspeeds below 25mph (40 km/h) whenthe turn signal light is switched on orthesteering wheel is turned
RAtspeeds between 25mph (40 km/h) and45mph (70 km/h) whenthesteering wheelis turned
Traffic circle and intersection function:thecornering light is activated on bothsidesthroughanevaluation ofthe current GPS position ofthevehicle. Itremains active until afterthevehiclehas leftthe traffic circle orthe intersection.
Adaptive Highbeam Assist
Adaptive Highbeam Assist function
\nWARNINGRisk of accident despiteAdaptive Highbeam Assist
Adaptive Highbeam Assist does notrecog‐nizethefollowingroad users:
RRoad users without lights, e.g. pedes‐trians
RRoad users with poor lighting, e.g.cyclists
RRoad users whose lighting is obstructed,e.g.bya barrier
Light and visibility12 5

Removeprotectivefilm1fromthe mainte‐nance display onthe tip ofthe newly instal‐led wiper blades.
Ifthe color ofthe maintenance displaychangesfrom blackto yellow,the wiper blades should bereplaced.
The duration untilthe colorchangesvariesdepending onthe usage conditions.
Mirrors
Operatingthe outside mirrors
\nWARNINGRisk of injuryfrom adjustingthevehicle settings whilethevehicle is inmotion
You could lose control ofthevehicle inthefollowing situations:
Rifyou adjustthe driver's seat,the headrestraint,thesteering wheel orthe mirrorwhilethevehicle is in motion
Rifyoufastenyour seat belt whilethevehi‐cle is in motion
Beforestartingthe engine: adjustthedriver's seat,the headrestraint,thesteering wheel orthe mirror andfastenyour seat belt.
\nWARNINGRisk of accident duetomis‐judgment of distances when usingthepassenger mirror
The outside mirror onthe front-passengersidereflects objects on a smaller scale. Theobjects in view are infact closerthantheyappear.
As aresult,you may misjudgethe distancebetweenyou andtheroad user drivingbehindyou,forexample, whenchanginglanes.
Therefore, always lookoveryour shoul‐der in ordertoensurethatyou areaware ofthe actual distance betweenyou andtheroad users driving behindyou.
Foldingthe outside mirrorsin/out
Brieflypress switch1.
Resettingthe outside mirrors
Ifthe battery has been disconnected or com‐pletely discharged,the outside mirrorsmustbereset. Onlythen willthe automatic mirrorfolding functionworkproperly.
Brieflypress switch1.
134Light and visibility

ROnly increasethe engine speed gradually andacceleratethevehicletofull speed after1,000 miles (1,500 km).
This also applies whenthe engine or parts ofthedrivetrain havebeenreplaced.
Please also observethefollowing breaking-innotes:
RIn certain driving and driving safety systems,the sensors adjust automatically while a cer‐tain distance is being driven afterthevehiclehas been delivered or afterrepairs.Full sys‐tem effectiveness is notreached untiltheend ofthisteach-in process.
RBrakepads, brake discs and tiresthat areeither new or havebeenreplaced only ach‐ieveoptimum braking effect and grip afterseveral hundred kilometers of driving. Com‐pensateforthereduced braking effectbyapplyinggreaterforcetothe brake pedal.
Notes on driving
\nWARNINGRisk of accident duetoobjects inthe driver'sfootwell
Objects inthe driver'sfootwell may impedepedal travel or block a depressed pedal.
This jeopardizesthe operating androadsafety ofthevehicle.
Stowall objects inthevehicle securelysothattheycannotgetintothe driver'sfootwell.
Always installthefloor mats securelyand as prescribed in ordertoensurethatthere is always sufficientroomforthe pedals.
Do not use loosefloor mats and do notplacefloor mats ontop of one another.
\nWARNINGRisk of accident duetounsuitablefootwear
Operation ofthe pedals may berestrictedduetounsuitablefootwear such as:
RShoes with platformsoles
RShoes with high heels
RSlippers
When driving alwayswear suitableshoes in ordertobe abletooperatethepedals safely.
\nWARNINGRisk of accident when switch‐ing offthe ignition when driving
Ifyou switchoffthe ignition while driving,safety functions arerestricted or no longeravailable. This may affectthe powersteeringsystem andthe brakeforce boosting,forexample.
You willthen needtouse considerably moreforcetosteer and brake.
14 8Driving and parking

Ryou turnthesteering wheel hard at a lowspeed.
The engine isrestarted automatically if:
Rvehicles with automatic transmission:intransmission position[,youreleasethebrake pedal whenthe HOLD function is notactive.
Rvehicles with automatic transmission:you shift into transmission position[or^.
Ryou depressthe accelerator pedal.
Ran automatic enginestart is necessary.
Ifthe enginewas switched offbythe ECOstart/stop function andyou leavethevehicle, awarn‐ingtone sounds andthe engine is notrestarted.TheVehicle Operational Switch the Ignition OffBefore Exitingdisplay message also appears inthe multifunction display.Ifyou do not switchoffthe ignition,the ignition is automaticallyswitched off afterthree minutes.
Vehicles with a 48 V on-board electrical sys‐tem (EQ Boosttechnology)
The engine is switched off automatically inthefollowing situations if allvehicle conditionsforan automatic enginestop are met:
Ryou brakethevehicletoastandstill in trans‐mission position[or\\.
Ryou depressthe brake pedal while travelingat a low speed.
Ifyou switchonthe HOLD function or selectanother transmission position^,the engine willautomaticallystop inthefollowing situations:
Ryoustop behind avehiclethat is pullingaway.
Ryoustop at astop sign whenthere is novehi‐cle in front ofyou.
Ryou turnthesteering wheel hard at a lowspeed.
The engine isrestarted automatically if:
Ryoureleasethe brake pedal in transmissionposition[whenthe HOLD function is not
active and one ofthefollowing conditions isgiven:
-the drive programAor;is notselected
-the drive programAor;is selec‐ted butthevehicle does notstarttomove.
-the drive programAor;is selec‐ted,thevehicle moves at a speed of morethan15mph (20 km/h) and Glide modeis not activated.
Ryou engagetransmission position[or^.
Ryoureleasethe brake pedal,thevehicle isnot in Glide mode and itstartstomoveon agentle downhill gradient at a speed below2mph (3km/h).
Ryou depressthe accelerator pedal.
Ran automatic enginestart is necessary.
Ifthe enginewas switched offbythe ECOstart/stop function andyou leavethevehicle, awarn‐ingtone sounds andthe engine is notrestarted.TheVehicle Operational Switch the Ignition OffBefore Exitingdisplay message also appears in
Driving and parking151

DYNAMIC SELECT switch
Function oftheDYNAMIC SELECT switch
Mercedes-AMGvehicles:observethe notes inthe Supplement. Otherwise,you mayfailtorec‐ognize dangers.
UsetheDYNAMIC SELECT switchtochangebetweenthefollowing drive programs:
R=(Individual):individual settings
RB(Sport Plus):particularly sporty drivingstyle
RC(Sport):sporty drivingstyle
RA(Comfort):comfortable and economi‐cal drivingstyle
R;(Eco):particularlyeconomical drivingstyle
The drive program selected appears inthemultifunction display ofthe on-board com‐puter.
Depending onthe drive program,thefollowingsystemschangetheircharacteristics:
RDrive
-Engine and transmission management
-Active Distance AssistDISTRONIC
RESP®
RVehicles with AIRMATIC orDYNAMICBODYCONTROL:suspension
RElectric powersteering
Selectingthe drive program
PressDYNAMIC SELECT switch1forwardsor backwards.The drive program selected appears inthemultifunction display.
Configuring drive program I
Multimedia system:
VehicleeDYNAMIC SELECTIndividual
Selectthe individual setting.
Switchingthe operationfeedbackfor driveprogram on/off
Multimedia system:
VehicleeDYNAMIC SELECT
SwitchNotification for Useronsor offS.Whenthis function is active, a correspondingmessage is shown inthe media display whena drive program is selected withtheDYNAMIC SELECT switch.
Driving and parking15 3