bluetooth MERCEDES-BENZ C-Class SEDAN 2017 W205 Comand Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2017, Model line: C-Class SEDAN, Model: MERCEDES-BENZ C-Class SEDAN 2017 W205Pages: 178, PDF Size: 9.47 MB
Page 103 of 178
Phone book
Introduction
The phone book displays the contacts from the
address book which have a phone number.
The phone book of the mobile phone is auto-
matically displayed in the multimedia system
after the connection is established (default set-
ting). You can deactivate automatic calling up
(Y page 108).
In the phone book, you can:
R Create new contacts (Y page 102)
R Add information to contacts (Y page 103)
R Search for contacts (Y page 101)
R Store contacts (Y page 103)
R Delete contacts (Y page 103)
Further information on importing contacts
(Y page 109).
When you import, save, edit or add contacts,
they will be permanently saved in the multime-
dia system. These contacts will remain available
even when you connect the multimedia system
to a different mobile phone. You can view these contacts even without a mobile phone. Calling up the phone book
X
To call up the telephone menu: press the
002B button.
X To select Name Namein the telephone menu: turn
and press the controller.
If the phone book contains contacts, they will
be displayed in alphabetical order. The char-
acter bar at the bottom of the display is active.
You can now search for a contact
(Y page 101).
Further information on the symbols shown
(Y page 101). i
You can also call up the phone book with the
multifunction steering wheel; see the Vehi-
cles Operator's Manual. Symbol overview
Sym-
bol Explanation
00D8
Contact that has been entered, edi-
ted or saved in the multimedia sys-
tem 0094
Contact with voice tag
These contacts have also been
assigned a voice tag. For more infor-
mation, see the separate operating
instructions. 00D7
Contact that was called up from a
mobile phone 00BB
Contact imported from the SD mem-
ory card or USB device 00BA
Contact imported via the Bluetooth
®
interface Searching for a contact
Using the character bar You determine the first letter of the contact you
are looking for with the first character you enter.
X To select characters: turn the controller and
press to confirm.
The first contact with the selected first char-
acter is highlighted in the phone book. If there
are similar contacts, the next different char-
acter is shown. For example, with contacts
such as Jana
Jana andJohn John, the beginnings of the Phone book
101Telephone Z
Page 111 of 178
Importing contacts
Information and requirements Contacts can be imported as vCards (vcf files). A
vCard is an electronic business card. A memory
card, USB device or a Bluetooth ®
connection
can be used for importing.
i Up to 2000 entries can be imported into the
address book. A message notifies you when
the maximum number is reached. In order to
be able to then import new contacts, you have to delete existing contacts (Y page 108).Source Requirements
Memory card The SD card is inserted. It
contains importable contact
details. USB device The USB device is inserted
into the USB port. It contains
importable contact details. Bluetooth
®
connection If the sending of vCards is
supported via Bluetooth ®
,
vCards can be received on
mobile phones or netbooks,
for example.
Bluetooth ®
must be activa-
ted in the multimedia system
and on the respective device;
see the manufacturer's oper-
ating instructions. i
If automatic calling up of the contacts is
deactivated (Y page 108), theImport
Import from from
Phone
Phone option is available.
Importing from the memory card or USB device Contacts imported from the memory card or
from a USB device are identified by the 00BB
symbol.
The following conditions must be fulfilled in
order to import vCards:
R vCards (vcf files) may be located in the main
directory or in folders. The multimedia system
allows for a targeted selection of the corre-
sponding directories.
R vCards must have the file extension "vcf". i
The multimedia system supports vCards in
versions 2.1 and 3.0.
X To switch to the menu bar in the telephone
menu or the address book: slide 6the con-
troller.
X To select Options
Options: turn and press the con-
troller.
X To select Download Contacts Download Contacts: turn and
press the controller.
X To select From Memory Card
From Memory Card orFrom USB
From USB
device
device : turn and press the controller.
Receiving vCards via Bluetooth ® Multimedia system
X To switch to the menu bar in the telephone
menu or the address book: slide 6the con-
troller.
X To select Options Options: turn and press the con-
troller.
X To select Download Contacts
Download Contacts: turn and
press the controller.
X To select From
FromBluetooth
Bluetooth Device
Device: turn and
press the controller.
If the multimedia system is connected to a
mobile phone, the connection is terminated.
vCards can now be received by a device (PC,
mobile phone) via Bluetooth ®
.
External device
X Start the data transfer; see the manufactur-
er's operating instructions.
The number of vCards received is displayed in
the multimedia system.
Multimedia system
X To cancel the transfer: press the controller.
If a mobile phone was connected, the con-
nection to the mobile phone is established
again. Address book
109Telephone Z
Page 112 of 178
Received vCards are identified by the
00BA
symbol in the address book.
i If you switch to another main function, e.g.
navigation, while receiving vCards, the recep-
tion of vCards will be terminated. Deleting imported contacts
X To change to the menu bar when in the
address book or the telephone menu: slide
6 the controller.
X To select Options Options: turn and press the con-
troller.
X To select Delete Contacts
Delete Contacts: turn and press
the controller.
X Select one of the following options:
R Internal Contacts
Internal Contacts
R Imported from Storage Device
Imported from Storage Device
R Imported from Bluetooth Devices
Imported from Bluetooth Devices
R Downloaded from Phone
Downloaded from Phone
Turn and press the controller.
X To select Yes
Yes: turn and press the controller.
The contacts are deleted. Closing the address book
X Press the 002Bbutton one or more times. Call lists
Introduction
If your mobile phone supports the PBAP Blue-
tooth ®
profile, the call lists from the mobile
phone are displayed in the multimedia system.
When connecting the mobile phone, you may
have to confirm the connection for the PBAP
Bluetooth ®
profile.
If your mobile phone does not support the PBAP Bluetooth ®
profile, the multimedia system gen-
erates its own call lists. These are not the same
as the call lists in your mobile phone.
The call lists option is not available unless a
mobile phone is connected to the multimedia
system.
If the contact for an incoming call is not saved in the address book, you can use the call list to
save the telephone number. You can save this telephone number as a new contact in the
address book or add it to an existing contact
(Y
page 111).
i If you connect a different mobile phone to
the multimedia system, the call lists from the
new mobile phone are displayed. Opening the call list and selecting an
entry
Example: list of selected phone numbers
0043
Date and time (if available)
0044 Telephone number of the highlighted entry
and symbols (if assigned)
X To call up the telephone menu: press the
002B button.
X To switch to the menu bar: slide 6the con-
troller.
X To select Call Lists Call Lists: turn and press the
controller.
X To select Calls
CallsReceived
Received orCalls
Calls Dialed
Dialed :
turn and press the controller.
The relevant list is displayed.
X To select an entry and make a call: turn and
press the controller.
Closing the call list X To select 0039to the left of the list: slide 8
the controller and press to confirm.
or
X Press the 0038button.
The list is closed. Displaying details from a list entry
Abbreviated list entries can also be shown in full. 110
Call listsTelephone
Page 114 of 178
Overwriting an entry
X To select Yes
Yes: turn and press the controller.
A list of the existing five numbers is displayed.
X To select the number to be overwritten from
the list: turn the controller and press to con-
firm.
The entry is overwritten with the new tele-
phone number.
Canceling the overwriting of an entry X To select No
No: turn and press the controller.
The process is canceled. Deleting call lists
Call lists which are generated and managed by
the multimedia system can be deleted in the
multimedia system.
You cannot delete call lists from the multimedia
system which are displayed on a mobile phone
that supports the PBAP Bluetooth ®
.
X To call up the telephone menu: press the
002B button.
X To switch to the menu bar: slide 6the con-
troller.
X To select Call Lists
Call Lists: turn and press the
controller.
X Select Delete Call Lists Delete Call Lists.
A prompt appears asking whether you wish to
delete all call lists.
X To select Yes
Yes: turn and press the controller.
The call lists are deleted.
i If you delete call lists from the mobile phone
(see the manufacturer's operating instruc-
tions), the multimedia system updates the
call list display the next time it connects. Speed dial lists
Setting up
X To call up the telephone menu: press the
002B button.
X To call up the menu bar: slide 6the con-
troller.
X To select Call Lists Call Lists: turn and press the
controller.
X Select Speed Dial Preset List
Speed Dial Preset List.
The speed dial list is displayed. X
To highlight a memory position for the speed
dial: turn the controller.
If you highlight an entry that already exists in
the speed dial list, this is overwritten with the
new entry.
X To select G: slide 9the controller.
X Select Assign Speed Dial Preset Assign Speed Dial Preset.
The phone book is displayed.
X Search for a contact (Y page 101).
X To select a contact: turn and press the con-
troller.
The phone number has been saved as a speed
dial. Deleting
Deleting a speed dial preset X
To call up the telephone menu: press the
002B button.
X To call up the menu bar: slide 6the con-
troller.
X To select Call Lists
Call Lists: turn and press the
controller.
X Select Speed Dial Preset List Speed Dial Preset List.
The speed dial list is displayed.
X To highlight the memory position you want to
delete: turn the controller.
X To select G: slide 9the controller.
X To select Delete
DeleteSpeed
SpeedDial
DialPreset
Preset: turn
and press the controller.
X To select Yes
Yes: turn and press the controller.
The speed dial preset has been deleted.
Deleting all speed dial presets X
To call up the telephone menu: press the
002B button.
X To call up the menu bar: slide 6the con-
troller.
X To select Call Lists
Call Lists: turn and press the
controller.
X Select Speed Dial Preset List Speed Dial Preset List.
The speed dial list is displayed.
X To highlight the desired memory position:
turn the controller.
X To select G: slide 9the controller.
X To select Delete All Speed Dial Pre‐
Delete All Speed Dial Pre‐
sets sets: turn and press the controller. 112
Speed dial listsTelephone
Page 115 of 178
X
To select Yes
Yes: turn and press the controller.
All speed dials are deleted. Messages (text messages and e-
mails) General notes
New messages are identified by the 008Fsym-
bol in the display of the multimedia system and
an audible signal. Once you have read all the
messages, the symbol is no longer displayed.
The multimedia system displays the 100 newest text messages and e-mails.
The ú symbol is displayed when the mobile
phone's message memory is full. The symbol is
no longer displayed if you delete messages on
the mobile phone. Function restrictions
Text messages cannot be written while the vehi- cle is in motion. Requirements
To use the message functions, the connected
mobile phone must support the MAP Bluetooth ®
profile. The prompt for the MAP Bluetooth ®
pro-
file may have to be confirmed on the mobile
phone.
With some mobile phones, some settings still
have to be made after connecting to the multi-
media system (see the manufacturer's operat-
ing instructions). The messages are then dis-
played the next time you connect to the multi-
media system.
An e-mail account must be set up on the mobile
phone for the e-mail function (see the manufac-
turer’s operating instructions).
To read and write e-mails in the multimedia sys- tem, the e-mail account first needs to be con-
figured (Y page 114).
Some mobile phones with the MAP Bluetooth ®
profile:
R only show new text messages
R do not support the deleting or editing of text
messages
R do not support the drafts folder for text mes-
sages R
do not support the sending of text messages
R do not support the e-mail function
R do not send messages when in a locked sta-
tus.
Not all mobile phones available on the market
are equally suitable. Further information about
settings and supported functions of Bluetooth ®
-
capable mobile phones can be found on the
Internet at
http://www.mercedes-benz.com/connect .
Or call the Mercedes-Benz Customer Assistance
Center at 1-800-FOR-MERCedes
(1-800-367-6372) (for the USA) or Customer
Relations at 1-800-387-0100 (for Canada). Settings
Calling up the settings menu for mes-
sages X
To call up the telephone menu: press the
002B button.
X To switch to the menu bar: slide 6the con-
troller.
X To select 0083: turn and press the controller.
The message menu is displayed.
X To switch to the menu bar: slide 6the con-
troller.
X To select Settings Settings: turn and press the con-
troller.
The text message settings and the available e-
mail accounts of the connected mobile phone will be displayed.
Configuring the text messages dis-
played X
Call up the settings menu for messages
(Y page 113).
X To highlight Text Message Text Message : turn the control-
ler.
X To select G: slide 9the controller.
A menu with the following options is shown:
R All Messages
All Messages
All the messages are displayed.
R New Messages New Messages
Only the messages that are new on the
mobile phone are displayed. You can also Messages (text messages and e-mails)
113Telephone Z
Page 122 of 178
Your multimedia system equipment
These operating instructions describe all the
standard and optional equipment of your multi-
media system, as available at the time of going
to press. Country-specific differences are pos-
sible. Bear in mind that your vehicle may not
feature all functions described here. This also
applies to safety-relevant systems and func-
tions.
Read the information on qualified specialist
workshops in the vehicle Operator's Manual. Important safety notes
G
WARNING
If you operate information systems and com-
munication equipment integrated in the vehi- cle while driving, you will be distracted from
traffic conditions. You could also lose control of the vehicle. There is a risk of an accident.
Only operate the equipment when the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the equip-
ment when the vehicle is stationary.
You must observe the legal requirements for the country in which you are driving when operating
the system. General notes
Connection difficulties while the vehi-
cle is in motion
The connection may be lost if: R the mobile phone network coverage is insuf-
ficient
R the vehicle has moved into a mobile phone
cell with no free channels
R the SIM card used is not compatible with the
network available Function restrictions (Canada)
You will not be able to use the Mercedes-Benz
Apps and Internet connection, or will no longer
be able to use them, or may have to wait before
using them, in the following situations:
R if your mobile phone is switched off
R if your mobile phone has not been enabled for
Internet access
R if the Bluetooth ®
function is switched off on
the multimedia system and the desired phone
is to be connected via Bluetooth ®
R if the Bluetooth ®
function is switched off on
the mobile phone and the phone is to be con-
nected via Bluetooth ®
R if the mobile phone is not connected via USB
and the phone is to be connected via USB
R if neither the mobile phone network nor the
mobile phone allow simultaneous use of a
phone and an Internet connection
R if the mobile phone has not been enabled for
Internet access via Bluetooth ®
and/or USB
The driver is not permitted to call up websites
while driving and use of the Mercedes-Benz
Apps is restricted.
i It is possible that you may not be able to
receive calls when an Internet connection is
active. This depends on the mobile phone and
the mobile phone network used. Conditions for access
USA: to use Mercedes-Benz Apps and Internet
access, mbrace must be activated and opera-
tional. Furthermore, mbrace must be activated
for Mercedes-Benz Apps and Internet access.
Take note of the connection priorities. An emer- gency call has the highest priority. When a ser-
vice call, e.g. a breakdown service call or the MB
Info Call, is active, an emergency call can still be initiated. A service call, on the other hand, has
priority over a current Internet connection.
Therefore, you cannot establish an Internet con-nection during a service call.
Canada: a mobile phone must be connected via
Bluetooth ®
(Y page 92) or USB (Y page 157)
with the multimedia system. Furthermore, you
need a valid mobile service contract with a data option, which is used to calculate the associated
connection costs. 120
Conditions for accessOnline and Internet functions
Page 123 of 178
Conditions for a Bluetooth
®
connection
R The mobile phone supports at least one of the
Bluetooth ®
profiles DUN (Dial- UpNetwork-
ing) or PAN (Personal AreaNetwork).
The Bluetooth ®
profiles DUN and PAN enable
the Internet connection of the mobile phone
to be made available to the system.
Conditions for a USB connection
R The mobile phone supports at least one of the
USB classes:
- RNDIS (Remote NetworkDriverInterface
Specification)
- CDC/NCM (Network ControlModel)
- CDC/ECM ( EthernetControlModel)
- CDC/ACM ( AccessControl Model)
The USB classes enable the mobile phone
Internet connection to be made available to
the system.
The terms of use are shown when the system is
used for the first time and then once a year
thereafter. Only read and accept the terms of
use when the vehicle is stationary.
The driver is not permitted to call up websites
while driving and use of the Mercedes-Benz
Apps is restricted.
i The availability of individual Mercedes-Benz
Apps may vary depending on the country. Setting up an Internet connection
(Canada) Procedure and general information
In order to set up a mobile phone for Internet
access, your mobile phone must be connected
to the multimedia system via Bluetooth ®
(Y page 92) or USB (Y page 145).
If you are using Internet access for the first time,
you must enable the connected mobile phone
for Internet access (Y page 121). If the con-
nected mobile phone supports the Bluetooth ®
PAN profile or the USB classes RNDIS,
CDC/NCM or CDC/ECM, you do not need to
make additional settings. The Internet connec-
tion is established. If the connected mobile
phone does not support the named Bluetooth ®
profile or the named USB classes, predefined
(Y page 122) or manual access data
(Y page 122) must be set. While initializing the mobile phone for the Inter-
net connection, access data which is already on the mobile phone may be overwritten. You
should therefore check the settings on the
mobile phone (see the manufacturer's operatinginstructions). Enabling the mobile phone for Inter-
net access
X Call up Internet functions (Y page 124).
X To switch to the menu bar: slide 6the con-
troller.
X To select Settings Settings: turn and press the con-
troller.
X To select Configure Internet Settings
Configure Internet Settings:
turn and press the controller.
A message is displayed telling you that the
settings for the Internet functions depend on
your mobile phone network provider and your mobile phone.
If a mobile phone has already been enabled,
the device list is displayed.
X To select Start Search Start Search : turn and press the
controller.
Mobile phones are displayed that:
R are connected to the multimedia system
R fulfill the conditions for the Internet func-
tions
R have not yet been set up for the Internet
function X
To select a mobile phone from the device list:
turn the controller and press to confirm.
If the mobile phone supports the Bluetooth ®
PAN profile or the USB classes RNDIS, CDC/ NCM or CDC/ECM, Internet access is set up.
You can use the Internet functions.
If the connected mobile phone does not sup-
port the named Bluetooth ®
profile or the
named USB classes, predefined (Y page 122) Setting up an Internet connection (Canada)
121Online and Internet functions Z
Page 143 of 178
Your multimedia system equipment
These operating instructions describe all the
standard and optional equipment of your multi-
media system, as available at the time of going
to press. Country-specific differences are pos-
sible. Bear in mind that your vehicle may not
feature all functions described here. This also
applies to safety-relevant systems and func-
tions.
Read the information on qualified specialist
workshops in the vehicle Operator's Manual. Activating media mode
General notes
There are several ways to activate media sour-
ces using the multimedia system.
The relevant sections of the Operator's Manual
describe the simplest way to activate a media
source. This section describes all options for
activating media sources. If you wish to play
external media sources, the default display
must already be turned on. Connections for external media sour-
ces
The following external media sources can be
used:
R Apple ®
devices (e.g. iPhone ®
)
R USB devices (e.g. USB stick, MP3 player)
Two USB ports are located in the stowage
space under the armrest.
R CD
R DVD video R
SD cards
R devices with Bluetooth ®
connection Activating media using the button
X To call up the media menu: press the 00FD
button.
The last media source you have set is dis-
played.
X Press the 00FDbutton again.
The menu appears with the available media
sources.
X To select the media source: turn the control-
ler and press to confirm.
Depending on the vehicle equipment, the fol- lowing media sources will be available:
R Disc Disc
R Memory Card
Memory Card
R Media Register
Media Register
R Media Interface 1
Media Interface 1
R Media Interface 2
Media Interface 2
R Bluetooth Audio
Bluetooth Audio
If playable music files are found, they will be
played by the multimedia system. Activating media using the main func-
tion bar
X To display the main function bar: slide 5the
controller.
X To select Media Media: turn and press the controller.
The last media source you have set is dis-
played.
X To select Media
Media in media mode: slide 5and
press the controller.
The menu appears with the available media
sources.
X To select the media source: turn the control-
ler and press to confirm.
If the media source contains music or video
files, these will be played. The corresponding
basic display appears. Activa
ting media mode
141Media
Page 154 of 178
Calling up memory space info
X
In media mode: press the 00FDbutton.
A menu appears with the available media
sources.
X To select the media source: turn the control-
ler and press to confirm.
X To switch to the menu bar: slide 6the con-
troller.
X To select Options Options: turn and press the con-
troller.
X Select Manage Media Register
Manage Media Register.
X Select Memory Info
Memory Info. Selecting a playback mode
The following options are available:
R Normal Track Sequence
Normal Track Sequence: the tracks are
played in the normal order (e.g. track 1, 2, 3
etc.).
R Random Random Medium
Medium: all the tracks on the medium
are played in random order.
R Random Track List
Random Track List: the tracks in the cur-
rently active track list are played in random
order. X
In media mode: press the 00FDbutton.
A menu appears with the available media
sources.
X To select the media source: turn the control-
ler and press to confirm.
X To switch to the menu bar: slide 6the con-
troller.
X To select Options
Options: turn and press the con-
troller.
X Select Playback Mode Playback Mode.
The options list appears. The 003Bdot indicates
the current setting.
X Select the desired option.
The option is switched on. For all options
except Normal Track Sequence Normal Track Sequence, you will
see a corresponding icon in the main display.
i The
Normal Track Sequence
Normal Track Sequence option is
automatically selected when you change the
disc you are currently listening to or when you
select a different medium. If an option is
selected, it remains selected after the multi-
media system is switched on or off. Bluetooth
®
audio mode Requirements
The Bluetooth ®
function must be activated in
the multimedia system (Y page 40).
Bluetooth ®
audio mode requires a Bluetooth ®
-
capable audio device.
Check your Bluetooth ®
audio device for the fol-
lowing; see the manufacturer's operating
instructions:
R Bluetooth ®
audio profile
The Bluetooth ®
audio device must support
the A2DP and AVRCP Bluetooth ®
audio pro-
files.
R Bluetooth ®
visibility
Certain Bluetooth ®
audio devices do not just
require activation of the Bluetooth ®
function.
In addition, your device must be made "visi-
ble" to other devices.
R Bluetooth ®
device name
This device name is predetermined but can
usually be changed. For a clear selection of
the Bluetooth ®
device, Mercedes-Benz rec-
ommends that you customize the device
name. 152
Bluetooth ®
audio modeMedia
Page 155 of 178
i
A2DP (A
dvanced AudioDistribution Profile):
Bluetooth ®
audio profile for audio data trans-
mission
AVRCP (Audio VideoRemote ControlProfile):
Bluetooth ®
audio profile for audio data play-
back
i The Bluetooth ®
device must be visible to the
multimedia system for authorization. After
authorization, the multimedia system even
finds the Bluetooth ®
device when it is not
visible. General notes
Before using your Bluetooth ®
audio device with
the multimedia system for the first time, you will need to authorize it.
When you authorize a new Bluetooth ®
audio
device, it is connected automatically. Connec-
tion involves first searching for a Bluetooth ®
audio device and then authorizing it.
You can authorize up to 15 Bluetooth ®
devices.
i If you authorize a mobile phone that sup-
ports Bluetooth ®
audio, the A2DP and AVRCP
Bluetooth ®
audio profiles are connected
automatically.
The mobile phone is then entered:
R in the Bluetooth ®
telephone list
(Y page 93)
R in the Bluetooth ®
device list
(Y page 154)
Mercedes-Benz recommends authorizing a
mobile phone in Bluetooth ®
telephony
(Y page 94). Bluetooth
®
audio basic display 0043
Audio transmission status (depending on
the Bluetooth ®
audio device, also title name
and artist)
0044 Data medium position in the media list
0087 Sound settings
0085 Connecting the device
0083 To stop 00CFor start 00D0playback
0084 Name of the connected Bluetooth ®
audio
device (example)
006B Options menu Switching to Bluetooth
®
audio
X To call up the media menu: press the 00FD
button.
The last media source you have set is dis-
played.
X To show the main function bar: slide 5the
controller.
X To select Media
Media: turn and press the controller.
X To select Bluetooth Audio Bluetooth Audio: turn and press
the controller.
If the Bluetooth ®
audio device is already
authorized, it is activated by the multimedia
system. The basic display (Y page 153) then
appears. Playback starts.
If you see the No NoBluetooth
Bluetooth Audio
AudioDevice
Device
Connected
Connected message, you will need to author-
ize the Bluetooth ®
audio device first
(Y page 154).
i If the Bluetooth ®
audio device connected
supports metadata and corresponding data is
available, then the artist, track and album
name can be displayed. Bluetooth
®
audio mode 153Media Z