bulb MERCEDES-BENZ C230 2007 W203 User Guide

369 Practical hints
Replacing bulbs
Notes on bulb replacement

Only use 12 volt bulbs of the same type
and with the specified watt rating.

Switch lights off before changing a bulb
to prevent short circuits.

Always use a clean lint-free cloth when
handling bulbs.

Your hands should be dry and free of oil
and grease.

If the newly installed bulb does not
come on, visit an authorized
Mercedes-Benz Center.
Have the LEDs and bulbs for the following
lamps replaced by an authorized
Mercedes-Benz Center:

Additional turn signals in the exterior
rear view mirrors

High mounted brake lamp

Xenon* lamps

Front fog lamps

Front side marker lamps
Warning!G
Bulbs and bulb sockets can be very hot.
Allow the lamp to cool down before
changing a bulb.
Keep bulbs out of reach of children.
Halogen lamps contain pressurized gas.
A bulb can explode if you

touch or move it when hot

drop the bulb

scratch the bulb
Wear eye and hand protection.
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the
lamp and its components. We recommend
that you have such work done by a qualified
technician.
!Do not replace the LEDs yourself. You could
otherwise damage the LEDs or parts of the
vehicle. Only have the LEDs replaced by an
authorized Mercedes-Benz Center.

370 Practical hints
Replacing bulbs
Replacing bulbs for front lamps
Before you start to replace a bulb for a
front lamp, do the following first:
Turn the exterior lamp switch to
positionM (
page 109).
Open the hood (page 274).
Halogen headlamp
1Housing cover for low beam headlamp
2Housing cover for high beam head-
lamp, parking and standing lamp3Bulb socket for turn signal lamp bulb
4Bulb socket for low beam bulb
5Bulb socket for high beam bulb
6Bulb socket for parking and standing
lamp bulbLow beam bulb
Press the clamp on housing cover1
and remove it.
Pull the electrical connector off.
Turn bulb socket4 counterclockwise
and take out the bulb.
Insert the new bulb so that its socket
locates in the recess of the lamp
housing.
Turn bulb socket4 clockwise until it
engages.
Plug the electrical connector onto the
bulb.
Align housing cover1 and press until
it engages.

371 Practical hints
Replacing bulbs
High beam bulb
Press the clamp on housing cover2
and remove it.
Pull the electrical connector off.
Turn bulb socket5 counterclockwise
and take out the bulb.
Insert the new bulb so that its socket
locates in the recess of the lamp
housing.
Turn bulb socket5 clockwise until it
engages.
Plug the electrical connector onto the
bulb.
Align housing cover2 and press until
it engages.Front turn signal lamp bulb
Turn bulb socket3 with the bulb
counterclockwise and remove it.
Press gently onto the bulb and turn it
counterclockwise out of bulb
socket3.
Press new bulb gently into bulb
socket3 and turn clockwise until it
engages.
Place bulb socket3 back into the
lamp and turn it clockwise.Parking and standing lamp bulb
Press the clamp on housing cover2
and remove it.
Pull out bulb socket6 with the bulb.
Pull the bulb out of bulb socket6.
Press the new bulb into bulb socket6.
Press bulb socket6 back into the
lamp.
Align housing cover2 and press until
it engages.

372 Practical hints
Replacing bulbs
Bi-Xenon* headlamp
1Housing cover for Bi-Xenon headlamp
2Housing cover for high beam flasher,
parking and standing lamp3Bulb socket for turn signal lamp bulb
4Bulb socket for high beam flasher bulb
5Bulb socket for parking and standing
lamp bulbHigh beam flasher bulb
Press the clamp on housing cover2
and remove it.
Pull the electrical connector off.
Turn bulb socket4 counterclockwise
and take out the bulb.
Insert the new bulb so that its socket
locates in the recess of the lamp
housing.
Turn bulb socket4 clockwise until it
engages.
Plug the electrical connector onto the
bulb.
Align housing cover2 and press until
it engages.
Warning!G
Do not remove the cover1 for the
Bi-Xenon headlamp. Because of high voltage
in Bi-Xenon lamps, it is dangerous to replace
the bulb or repair the lamp and its compo-
nents. We recommend that you have such
work done by a qualified technician.

373 Practical hints
Replacing bulbs
Front turn signal lamp bulb
Turn bulb socket3 with the bulb
counterclockwise and remove it.
Press gently onto the bulb and turn it
counterclockwise out of bulb
socket3.
Press new bulb gently into bulb
socket3 and turn clockwise until it
engages.
Place bulb socket3 back into the
lamp and turn it clockwise.
Parking and standing lamp bulb
Press the clamp on housing cover2
and remove it.
Pull out bulb socket5 with the bulb.
Pull the bulb out of bulb socket5.
Press the new bulb into bulb socket5.
Press bulb socket5 back into the
lamp.
Align housing cover2 and press until
it engages.Additional turn signal lamp bulbs
The additional turn signal lamps in the
exterior rear view mirrors have LEDs.
If a malfunction occurs or LEDs fail to
function, the entire turn signal unit must be
replaced. Have the turn signal unit
replaced by an authorized Mercedes-Benz
Center.
Front side marker lamp bulbs
Since replacing the side marker lamp bulbs
is a technically highly demanding process,
we recommend you have the side marker
lamp bulbs replaced by an authorized
Mercedes-Benz Center.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
Turn the exterior lamp switch to
positionM (
page 109).
Open the trunk (page 96).
Tail lamp unit
1Latch


374 Practical hints
Replacing bulbs
Fold the corresponding trim panel to
the side.
Turn latch1 to vertical position and
remove the bulb carrier.
Bulb carrier
2Brake lamp bulb
3Backup lamp bulb
4Rear fog lamp (driver’s side only),
tail and standing lamp bulb
5Parking and side marker lamp bulb
6Turn signal lamp bulb
Press gently onto the respective bulb
and turn counterclockwise out of its
bulb socket.
Press the new bulb gently into its bulb
socket and turn clockwise until it
engages.
Reinstall the bulb carrier and lock it
again with latch1.
Reinstall the trim panel.License plate lamp
1Screw
2License plate lamp
Loosen both screws1.
Remove the license plate lamp2.
Replace the bulb.
Reinstall the license plate lamp2.
Retighten screws1.


420 Index
Audio system 187
Audio and telephone, operation 187
Button and soft key operation 190
CD changer* with MP3 202
CD operation 201
Operating and display elements 188
Operating audio system 190
Operating safety 187
Radio operation 194
Telephone* operation 208
Auto-dimming mirror* 161
Automatic central locking
Activating/deactivating
(Control system) 143
Automatic climate control* 174
Control panel 175
Defrosting, front 179
Rear window defroster 163
Automatic headlamp mode 110
Automatic locking when driving 99
Automatic shift program 157
Automatic time change (Standard time,
Daylight Saving time) 137Automatic transmission 151
Accelerator position 155
Automatic shift program 157
Emergency operation
(limp-home mode) 159
Gear ranges 156
Gear selector lever 151
Gear selector lever positions 153
Gear shifting malfunctions 159
Kickdown 155
One-touch gearshifting 158
Program mode selector switch 157
Shifting procedure 152
Automatic transmission*
Fluid level (ATF) 277
Starting engine 47B
Backrest
Driver’s multicontour seat*
(Canada only) 105
Rear seat, folding 234
Seat, manual 35
Seat, power* 37
Backup lamps
Messages in display 352
Replacing bulbs 368
Bar 304
BAS 84
Batteries, SmartKey
Changing 366
Checking battery condition 95
Battery, Vehicle 279, 383
Charging 385
Disconnecting and connecting 384
Jump starting 386
Removing and installing 384
Bead 304
Block heater (Canada only) 309
Bolts, Spare wheel 360

421 Index
Brake fluid 412
Checking 273
Message in display 344
Brake lamps
Cleaning lenses 316
Replacing bulbs 373
Brake pads
Message in display 344
Brakes 262
Warning lamp 25, 324
Break-in period 260
Bulbs, replacing see Replacing bulbsC
California retail buyers and lessees,
important notice 11
Cargo area see Trunk
Cargo tie-down rings* 236
Carpets, cleaning 319
Catalytic converter 269
CD changer* 201
CD player* 128, 201
Centigrade see
Temperature display mode 133
Central locking
Automatic 99, 143
From inside 100
Locking/unlocking from inside 100
Switch 100
Certification label 398
Certification label, examples 398
Charcoal filter
Automatic climate control* 183Children in the vehicle 74
Air bags 60
Blocking rear
door window operation 80
Indicator lamp, front
passenger air bag 68, 331
Infant and child restraint systems 74
LATCH-type child seat anchors 79
Occupant Classification System
(OCS) 64
Cigarette lighter 242
Climate control system 164
Control panel,
Automatic climate control 175
Control panel,
Climate control 165
Defrosting, Front 169
Rear window defroster 163
Clock 25, 121
Setting time 136, 137
Cockpit 22
Cold tire inflation pressure 304
Cold weather performance 415
Collapsible wheel chock 358

422 Index
COMAND* see separate COMAND
operating instructions
Combination switch 50, 113
Control system 121
Multifunction display 121
Multifunction steering wheel 122
Resetting to factory default 131
Control system menu 121
AUDIO 127
Menus overview 124
NAV* 129
Settings 131
Standard display 126
TEL* 146
Trip computer 144
Vehicle status
message memory 130
Control system submenus 123, 125
Convenience 143
Instrument cluster 134
Lighting 139
Time/Date 136
Vehicle 142Coolant 278, 416
Anticorrosion/antifreeze
quantity 416
Capacities 409, 410
Checking coolant level 273, 278
Messages in display 345–347
Temperature 270
Temperature gauge 25, 119
Corner-illuminating front fog lamps* 113
Replacing bulbs 368
Cruise control 227
Cruising range, fuel 415
Cup holder 239, 241
Curb weight 304D
Date display, setting 138
Daytime running lamp mode 111
Setting 139
Deep water see Standing water
Defogging windshield
Automatic climate control* 180
Climate control 170
Defrosting, Front
Automatic climate control* 179
Climate control 169
Defrosting, Rear 163
Delayed shut-off
Exterior lamps 141
Interior lighting 142
Department of Transportation see DOT
Difficulties
While driving 53
With starting 47
Digital clock see clock
Digital speedometer 126
Dimensions, vehicle 408
Direction of rotation (tires) 284

425 Index
Fog lamps 112
Message in display 350, 352
Replacing bulbs 368
Four wheel electronic traction system
(4MATIC) with ESP
®88
4MATIC 88
Front air bags 63
Front lamps see Headlamps
Front passenger front air bag 63
Messages in display 337–340
Front passenger front air bag off
indicator lamp 27, 68, 331, 332
Front seat head restraints see
Head restraints
FSS (Flexible Service System)
(Canada vehicles) 310
Fuel 271, 272, 413
Additives 413
Capacities, Fuel tank 411
Cruising range 415
E85 (Ethanol fuel) 411, 415
Filling the tank 271
Fuel filler flap and cap, Multifunction
display messages 326, 349
Fuel gauge 25
Fuel reserve warning lamp 328Requirements, Octane rating 414
Switching (Flexible fuel vehicle) 415
Technical data 411, 413
Fuel consumption statistics
From start 144
Since last reset 145
Fuel filler flap 271
Fuel reserve warning lamp 25
Fuel tank
Capacity 411
Filler flap 271
Fuels, coolants, lubricants etc.
Capacities 409
Fuses 391
Fuse box (main) in
passenger compartment 392
Fuse box in engine compartment 392
Fuse box in trunk 394
Fuse extractor 394
Replacing 391G
Garage door opener* 253
Gasoline also see Fuel
Gasoline see Fuel
GAWR 305
Gear range
Automatic transmission 156
Limiting 156
Shifting into optimal 159
Gear selector lever 46, 47, 150, 151
Cleaning 319
Gearshift pattern 151
Lock 47
Position 152, 153
Position,
Automatic transmission* 121
Shifting procedure 152
Unlocking in an emergency 363
Global locking/unlocking see Key
Glove box 237
Good visibility 160
Gross Axle Weight Rating see GAWR
Gross Vehicle Weight Rating see GVWR
Gross Vehicle Weight see GVW
GVW 305
GVWR 305