tire pressure MERCEDES-BENZ C300 2008 W204 Owner's Manual

Contents
At the gas station .............................. 322
Refueling ...................................... 322
Check regularly and
before a long trip.......................... 324
Engine compartment ......................... 325
Hood ............................................ 325
Engine oil ..................................... 327
Transmission fluid level ................ 328
Coolant level ................................ 329
Windshield washer system and
headlamp cleaning system* ......... 330
Tires and wheels ................................ 331
Important guidelines .................... 331
Tire care and maintenance........... 332
Direction of rotation ..................... 334
Loading the vehicle ...................... 334
Recommended tire
inflation pressure ......................... 339
Checking tire inflation pressure ... 341
Tire labeling.................................. 348
Load identification ....................... 352
DOT,
Tire Identification Number (TIN) ... 352
Maximum tire load ....................... 353
Maximum tire inflation pressure .. 354Uniform Tire Quality Grading
Standards (U.S. vehicles) .............. 354
Tire ply material ............................ 356
Tire and loading terminology......... 356
Rotating tires ................................ 359
Winter driving ..................................... 360
Winter tires ................................... 360
Snow chains.................................. 361
Maintenance....................................... 362
Maintenance
service indicator message ............ 362
Calling up the maintenance
service indicator display ............... 363
Resetting the maintenance
service indicator ........................... 363
Vehicle care........................................ 364
Cleaning and care of vehicle ......... 364
Practical hints.................................. 373
What to do if …? ................................. 374
Lamps in instrument cluster ......... 374
Air bag off indicator lamp ............. 385
Vehicle status messages in
the multifunction display .............. 387
Where will I find ...? ............................ 420
First aid kit.................................... 420
Vehicle jack, vehicle tool kit,
luggage bowl, Minispare wheel ..... 420
Unlocking/locking in an emergency .. 424
Unlocking the vehicle ................... 424
Locking the vehicle ....................... 425
Fuel filler flap ................................ 426
Manually unlocking the
transmission gear selector lever ... 426
Resetting activated head restraints.... 427
Replacing SmartKey batteries ............ 428
Replacing bulbs .................................. 430
Bulbs............................................. 431
Replacing bulbs for front lamps .... 432
Replacing bulbs for rear lamps ..... 436
Replacing wiper blades ...................... 438
Removing wiper blades ................. 439
Installing wiper blades .................. 439

21 At a glance
Exterior view
ItemPage
1Trunk

Unlocking

Opening and closing

Minispare wheel

Vehicle tool kit
269
269
441
420
2Rear lamps431
3Rear window, defrosting265
4Fuel filler flap
Refueling
Gasoline322
322
481
5Doors

Locking and unlocking

Opening and closing

Unlocking/locking in an
emergency
70
70
424
6Exterior rear view mirror

Adjusting97
ItemPage

Auto-dimming rear view
mirrors*

Power folding exterior rear
view mirrors*

Parking position*
(Canada only)
97
100
98
101
7Tires and wheels

Checking tire inflation
pressure

Tire Pressure Monitoring
System (TPMS), (USA only)

Run Flat Indicator (Canada
only)

General information

Minispare wheel

Flat tire
331
341
344
342
331
422
440
8Towing the vehicle
Installing towing eye bolt453
455
ItemPage
9Headlamp cleaning system*112
aFront lamps431
bHood, opening
Engine oil
Coolant
Battery325
327
329
446
cWindshield wipers
Wiper blades, replacing
Wiper blades, cleaning117
438
368
dWindshield
Front window, defrosting
Cleaning with wiper fluid
Cleaning
264
119
368
eRoofs

Power tilt/sliding sunroof

Panorama roof with power
tilt/sliding panel*
273
276

27 At a glance
Instrument cluster
ItemPage
1Combination gauge with:
Fuel gauge
4Fuel tank reserve
warning lamp
Coolant temperature gauge
ÌCoolant temperature
warning lamp
Indicator/warning lamps:
AHigh beam headlamp
indicator lamp
±Engine malfunction
indicator lamp
380
112
374
382
378
;
USA only
3
Canada onlyBrake warning
lamp376
2LLeft turn signal
indicator lamp131
ItemPage
3vElectronic Stability
Program (ESP®)
warning lamp
380
4Speedometer
5Multifunction display
6KRight turn signal
indicator lamp131
7Tachometer with:
HCombination low tire
pressure/TPMS
malfunction telltale,
USA only380
=SRS indicator lamp382
-Antilock Brake System
(ABS) indicator lamp59
8Outside temperature
(manual transmission)
Outside temperature /
additional speedometer
(automatic transmission*)149
149,
169
ItemPage
9Outside temperature
(automatic transmission*)149,
169
aSelected program mode
indicator
(automatic transmission*)140
bGear position/range
indicator
(automatic transmission*)
Additional speedometer
(manual transmission)143
169
cDigital clock151
dInstrument cluster
illumination148

59 Safety and Security
Driving safety systems
Driving safety systems
This section contains information about
the following driving safety systems:

ABS (Antilock Brake System)

Adaptive Brake

BAS (Brake Assist System)

EBP (Electronic Brake Proportioning)

ESP® (Electronic Stability Program)

4MATIC (Four Wheel Electronic Trac-
tion System)
ABS
The Antilock Brake System (ABS) regulates
the brake pressure so that the wheels do
not lock during braking. This allows you to
maintain the ability to steer your vehicle.The ABS is functional above a speed of
approximately 5 mph (8 km/h) indepen-
dent of road surface conditions.
On slippery road surfaces, the ABS will
respond even to light brake pressure.
The - indicator lamp in the instrument
cluster (
page 26) comes on when you
switch on the ignition. It goes out when the
engine is running.
Braking
At the instant one of the wheels is about to
lock up, a slight pulsation can be felt in the
brake pedal, indicating that the ABS is in
the regulating mode.
Keep firm and steady pressure on the
brake pedal while experiencing the pul-
sation.
Warning!G
The following factors increase the risk of
accidents:

Excessive speed, especially in turns

Wet and slippery road surfaces

Following another vehicle too closely
The driving safety systems described in this
section cannot reduce these risks or pre-
vent the natural laws of physics from acting
on the vehicle.
Always adapt your driving style to the pre-
vailing road and weather conditions and
keep a safe distance to other road users and
objects on the street.
iIn winter operation, the maximum effective-
ness of the ABS, BAS, EBP, ESP® and 4MATIC is
only achieved with winter tires (
page 360), or
snow chains as required.
Warning!G
Do not pump the brake pedal. Use firm,
steady brake pedal pressure instead. Pump-
ing the brake pedal defeats the purpose of
the ABS and significantly reduces braking
effectiveness.


60 Safety and Security
Driving safety systems
Continuous, steady brake pedal pressure
yields the advantages provided by the ABS,
namely braking power and the ability to
steer the vehicle.
The pulsating brake pedal can be an indica-
tion of hazardous road conditions and
functions as a reminder to take extra care
while driving.
Emergency brake maneuver
Keep continuous full pressure on the
brake pedal.
For more information, see “Practical hints”
(
page 374).
Adaptive Brake
Adaptive Brake provides a high level of
braking safety as well as increased braking
comfort. It is coupled with ABS, ESP
® and
BAS. Adaptive Brake takes driver and vehi-
cle characteristics into consideration, thus
achieving an optimal braking effect.
BAS
The Brake Assist System (BAS) operates in
emergency situations. If you apply the
brakes very quickly, the BAS automatically
provides full brake boost, thereby poten-
tially reducing the braking distance.
Apply continuous full braking pressure
until the emergency braking situation is
over.
The ABS will prevent the wheels from
locking.
When you release the brake pedal, the
brakes function again as normal. The BAS
is then deactivated.
Warning!G
When the ABS is malfunctioning, the BAS
EBP, ESP® and hill start assist are also
switched off.
When the ABS is malfunctioning, the wheels
may lock during hard braking, reducing
steering capability and extending the brak-
ing distance.
Warning!G
The ABS cannot prevent the natural laws of
physics from acting on the vehicle, nor can
it increase braking or steering efficiency
beyond that afforded by the condition of the
vehicle brakes and tires or the traction
afforded. The ABS cannot prevent acci-
dents, including those resulting from exces-
sive speed in turns, following another
vehicle too closely, or hydroplaning.
Only a safe, attentive, and skillful driver can
prevent accidents.
The capabilities of an ABS equipped vehicle
must never be exploited in a reckless or dan-
gerous manner which could jeopardize the
user’s safety or the safety of others.


155 Controls in detail
Control system
Menus, submenus and functions
Menu1Menu2Menu3Menu4Menu5Menu6
Trip computerNavi*AudioTel*ServiceSettings
(page 156)(page 158)(page 158)(page 160)(page 164)(page 165)
Commands/submenus
Standard displayShow route guid-
ance instructions,
current direction
traveledSelecting radio
stationTo take a callCall up vehicle mal-
function, warning and
system status mes-
sages stored in mem-
ory
1
1The vehicle status message memory menu is only displayed if there is a message stored.
Reset to factory
settings
Fuel consumption
statistics since startSelecting satellite
radio station*Select a phone
book entryTire Pressure Monitor-
ing System (TPMS)
(USA only)Instrument cluster
submenu
Fuel consumption
statistics since the
last resetOperating
CD player* RedialRun Flat Indicator
(Canada only)
Distance to emptyCall up maintenance
service display
Digital speed-
ometer or outside
temperature

164 Controls in detail
Control system
Service menu
The
Service menu is used for

calling up messages

checking tire inflation pressure elec-
tronically with the TPMS (standard on
U.S. vehicles)

activating Run Flat Indicator (standard
on Canada vehicles)

calling up the maintenance service in-
dicator displayCalling up vehicle malfunction, warning
and system status messages stored in
memory
Use the vehicle status message memory
menu to scan malfunction and warning
messages that may be stored in the
system. Such messages appear in the
multifunction display and are based on
conditions or system status the vehicle’s
system has recorded.
The vehicle status message memory menu
only appears if there are any messages
stored.
Warning!G
Malfunction and warning messages are only
indicated for certain systems and are inten-
tionally not very detailed. The malfunction
and warning messages are simply a remind-
er with respect to the operation of certain
systems and do not replace the owner’s
and/or driver’s responsibility to maintain
the vehicle’s operating safety by having all
required maintenance and safety checks
performed on the vehicle and by bringing
the vehicle to an authorized Mercedes-Benz
Center to address the malfunction and
warning messages (
page 387).

165 Controls in detail
Control system
Press ( or & to select the
Service menu.
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction
display:
1Number of messages
Press % or $ to select the mes-
sage.
Press # to confirm.
The stored messages will now be
displayed in the order in which they
have occurred.
Use % or $ to scroll through the
messages.Checking tire inflation pressure
For information about checking tire infla-
tion pressure (
page 339).
Activating Run Flat Indicator
(Canada only)
For information about activating Run Flat
Indicator (
page 342).
Calling up the maintenance service
indicator display
For information about calling up the main-
tenance service indicator display
(
page 362).
Settings menu
In the
Settings menu there are two
functions:

The function Reset to factory
settings
, with which you can reset all
the settings to the original factory
settings.

A collection of submenus with which
you can make individual settings for
your vehicle.
iSee the “Practical hints” section for mal-
function and warning messages (
page 387).
iIf you turn the SmartKey in the starter
switch to position0 and then back to position2,
all messages will be deleted from the message
memory.

277 Controls in detail
Panorama roof with power tilt/sliding panel*
Opening and closing panorama roof
with power tilt/sliding panel
The tilt/sliding panel only operates with
the roller sunblinds extended.
Warning!G
When opening or closing the tilt/sliding pan-
el, make sure there is no danger of anyone
being harmed by the opening or closing pro-
cedure.
The opening procedure of the tilt/sliding
panel can be immediately halted by releas-
ing the switch or, if the switch was moved
past the resistance point and released, by
moving the switch in any direction.
The closing procedure of the tilt/sliding
panel can be immediately halted by releas-
ing the switch.
The panorama roof with power tilt/sliding
panel is made out of glass. In the event of an
accident, the glass may shatter. This may re-
sult in an opening in the roof.
In a vehicle rollover, occupants not wearing
their seat belts or not wearing them properly
may be thrown out of the opening.
Such an opening also presents a potential
for injury for occupants wearing their seat
belts properly as entire body parts or por-
tions of them may protrude from the pas-
senger compartment.
When leaving the vehicle, always remove the
SmartKey or SmartKey with KEYLESS-GO*
from the starter switch, take it with you, and
lock the vehicle. Do not leave children
unattended in the vehicle, or with access to
an unlocked vehicle. A child’s unsupervised
access to a vehicle could result in an acci-
dent and/or serious personal injury.
!To avoid damaging the seals, do not trans-
port any objects with sharp edges which can
stick out of the tilt/sliding panel.
Do not open the tilt/sliding panel if there is snow
or ice on the roof, as this could result in malfunc-
tions.
!Please keep in mind that weather conditions
can sometimes change rapidly. Make sure to
close the tilt/sliding panel when leaving the ve-
hicle. If water enters the vehicle interior, vehicle
electronics could be damaged which is not cov-
ered by the Mercedes-Benz Limited Warranty.
iWhen the panorama roof with power
tilt/sliding panel is open, resonance noises may
result in addition to the usual wind noises. They
are caused by minimal pressure changes in the
passenger compartment. To reduce or eliminate
these noises, change the position of the panora-
ma roof with power tilt/sliding panel or open a
side window slightly.
iYou can also open or close the tilt/sliding
panel using the SmartKey, see “Summer open-
ing feature” (
page 123) and “Convenience
closing feature” (
page 124).


311 Operation
Driving instructions
Driving instructions
Drive sensibly – save fuel
Fuel consumption, to a great extent,
depends on driving habits and operating
conditions.
To save fuel you should:

Keep tires at the recommended tire
inflation pressures.

Remove unnecessary loads.

Remove roof rack when not in use.

Allow engine to warm up under low
load use.

Avoid frequent acceleration and decel-
eration.

Have all maintenance work performed
at the intervals specified in the Mainte-
nance Booklet and as required by the
Maintenance System. Contact an au-
thorized Mercedes-Benz Center.
Fuel consumption is also increased by driv-
ing in cold weather, in stop-and-go traffic,
on short trips, and in hilly area.
Drinking and drivingPedals
Power assistance
Warning!G
Drinking and driving and/or taking drugs
and driving are very dangerous combina-
tions. Even a small amount of alcohol or
drugs can affect your reflexes, perceptions
and judgment.
The possibility of a serious or even fatal ac-
cident are greatly increased when you drink
or take drugs and drive.
Do not drink or take drugs and drive or allow
anyone to drive who has been drinking or
taking drugs.
Warning!G
Make sure absolutely no objects are ob-
structing the pedals’ range of movement.
Keep the driver’s footwell clear of all obsta-
cles. If there are any floormats or carpets in
the footwell, make sure the pedals still have
sufficient clearance. Otherwise this could
lead to accidents or injury.
Warning!G
With the engine not running, there is no
power assistance for the brake and steering
systems. In this case, it is important to keep
in mind that a considerably higher degree of
effort is necessary to brake and steer the ve-
hicle.