MERCEDES-BENZ CL-Class 2003 C215 Comand Manual

113 Navigation
Important notes
Warning
G
The CD reader contains a Class 1 laser pro-
duct. There is a danger of invisible laser ra-
diation if the cover is opened or damaged.
Do not remove the cover. The CD reader
does not contain any parts which can be ser-
viced by the user. For safety reasons, have
any service work which may be necessary
performed only by an authorized
Mercedes-Benz Center.
!COMAND calculates the route with the
help of data that is stored on the navi-
gation CD.
Only use Mercedes-Benz navigation
CDs. Using other navigation CDs might
lead to malfunctions.
Because of changes in local traffic pat-
terns (e.g. road works) and/or incom-
plete data, errors in calculation may
occur.
As a result, the recommended route
may deviate from the ideal route. The
data stored on the CD only reflects lo-
cal conditions at the time of CD pro-
duction. CD maps do not cover all
areas nor all routes within an area.
iThe CD drive can read navigation CDs
and playback audio CDs.
If an audio CD is in the CD drive and
b is pressed, the message “No CD
available. Insert NAVI-CD type DX only”
will be displayed.
Remove the audio CD and insert a
navigation CD (
page 119).

114 NavigationImportant notes
Travelling abroad
If you intend to travel through different re-
gions or abroad, you will need the respec-
tive navigation CD.
Contact your Mercedes-Benz Center or
the Client Assistance Center at
1-800-FOR-MERCedes (1-800-367-6372)
for available CDs.
Change the navigation CD
(page 119).
!GPS (G
lobal P
ositioning S
ystem) sig-
nals received make it possible to deter-
mine the current vehicle position.
Deviations from the actual position
may occur

if the reception of GPS signals is
disturbed e.g. in parking garages
and tunnels

if road conditions are bad

depending on the vehicle’s conditi-
on
If the reception of the GPS signal is un-
available, you will have to manually en-
ter the current vehicle position
(page 179).
If your vehicle has been transported by
a car, train or ferry, COMAND needs
some time to find its exact position.
Moving the vehicle a few yards is typi-
cally enough to remedy this situation.

115 Navigation
Important notes
Changing tires
Mercedes-Benz recommends that you
have your tires changed by an authorized
Mercedes-Benz Center.
COMAND operates based on measure-
ments taken by wheel revolutions. When
changing tires, the correct tire information
must be entered for the system to operate
as expected.
See “Calibration” (
page 180).

116 NavigationQuick reference

Quick reference
PWR
TELNAV
CD
FM/AM
MNO
ABCJKL GHI
DEF
2
1
3
5
4
6
TUV PQRS
WXYZ8
7
9
0
P82.85-9501-31US
4
5
78
19 1718 16 15 14 13 12 11 1 0
13
69
2
Settings NAVI Destination Entry
Destn from Memory...
Destination via Map...
Points of Interest...
Last Destinations...Address...
SVC
- SEEKSEEK +
DEL BACK MAP
DETR RPT INFO DISP MUTE
OPR Z+
Z-

117 Navigation
Quick reference
Function
Page
1
Switching COMAND on
and off
12
2
Requesting and dis-
playing Info Services
System settings
184
187
3
Switching the navigation
system on
122
4
CD drive for navigation
CD or audio CDiPay attention to regional
version of navigation CD
45
5
Color screen
6
Entering destination via
the map
131
7
Zooming out for less de-
tailed map
Displaying and removing
a long list entry in full in
a window
133,
158
138
8
Zooming in for more de-
tailed map
133,
158
9
Turn to
Highlight menu field, list
entry or character
Alter the map scale
Press to
Confirm entry/selection,
starting function or acti-
vating submenu
133
10
Switching back to the
previous menu
11
When entering informati-
on:
Deletes last character or
complete entry
124
Function
Page
Function
Page
12
Muting current route in-
structions or
Switching off voice out-
put for the duration of
the current route
guidance
153
153
13
Change between day and
night display
198
14
Ejecting navigation CD
119
15
Route guidance active:
Displays estimated time
of arrival and current dis-
tance to destination
Route guidance not acti-
ve:
Displays last
destination driven
147
147

118 NavigationQuick reference
Function
Page
16
Route guidance active:
Switches between map
and symbol display
Route guidance not acti-
ve:
Activates location map
156
150
17
Selecting a detour during
route guidance
162
18
Manual recall of the cur-
rent voice instruction
154
19
Turn to
During voice output:
Lower (left)/raise (right)
the volumeFunction
Page

119 Navigation
Quick reference

Press q.
COMAND ejects the inserted
navigation CD.

Remove the CD.

Insert another navigation CD, e.g. a re-
gional version, with the label facing up.
The illustrated message will appear.
COMAND loads the program stored on
the navigation CD.
Changing the navigation CD
P82.85-9428-31US
NAVI
Program is being loaded.
Please wait.Total progress0
100%
Partial progress0
100%
!Do not interrupt the loading process. Do
not eject the navigation CD until the loa-
ding process has been completed.
iIf you do not remove an ejected CD, it
will be automatically retrieved by the CD
drive after 10 seconds.
The CD drive can
read navigation CDs, or

playback audio CDs.

120 NavigationDestination input

Destination input

Menu overview
SettingsNAVI Destination Entry
Destn from Memory...
Destination via Map...
Points of Interest
Last Destinations...Address...
1
P82.85-9502-31US
234
5
76
NAVI Destination EntryCity...
Street...
Center...NAVI Destn via MapPrevious Destn...
Current Location...
City...
Coordinate Destn...Center Map on:
NAVI Points of InterestAround Current Location...
Around Previous Destn...
Select City...
Regional...NAVI Last Destinations
NORTH ADAMS, NORTH
NORTHBROOK, WILWAUKEE
DEERFIELD, CHICORY
MMM, NORTHBROOK
NAVI Destn MemoDisplay Destinations...
Sort Destinations...
Delete Destn. in Memory...
Save Current Destination ...
Save Current Location...
NAVI SettingsLocation...
Calibration...Sound

121 Navigation
Destination input
Function
Page
1
Main destination input
menu
Entering a destinati-
on address

Retrieving a destina-
tion from the destina-
tion memory

Selecting a destinati-
on via the map

Entering Points of In-
terest

Selecting the last 12
destinations
123
173
131
137
141
2
Main address menu
Entering a destination
address
123
3
Main destination
memory menu
Selecting destination
from the destination
memory
173
4
“Destination via Map”
menu
Setting destination via
location on map
Setting destination via
coordinates
131
135
5
“Settings” menu
Entering vehicle location
Calibrating tires
179
180
6
“Points of Interest”
menu
Setting destination via
Point of Interest listing
137
7
Activating list of last
12 destinations for a re-
calculation
141
Function
Page

122 NavigationDestination inputMain destination input menu
Press b.
The display that appears is dependent
on the last navigation function used:Route guidance has been switched off

the main destination input menu or

the location map (
page 149).
Route guidance has been switched on

the symbol display with an arrow in-
dicating your driving direction
(page 144) or

the map with the symbol indicating
current vehicle location
(page 144)
Route guidance has been switched on,
COMAND has been switched off for
more than 2 hours

an inquiry menu (
page 168)Changing over to another system, for
e.g. radio

Press c.
Switching the navigation system on
Settings
P82.85-9429-31US
NAVI Destination Entry
Destn from Memory...
Destination via Map...
Points of Interest...
Last Destinations...Address...
iThe following message will appear when
COMAND is preparing for navigation
startup: “Navigation being activated.
Please obey all traffic rules.”. Then, one
of the 3 displays will appear.
!Potential fault messages during prepa-
ration of navigation startup:
“Navigation cannot be activated. An
error has occurred”.

“CD-Reading error. Please use ano-
ther CD”.
Eject the inserted CD and insert a
navigation CD.

“No CD available. Please insert
NAVI-CD type DX only”.
Insert a current DX-coded navigati-
on CD. Using other navigation CDs
might lead to malfunctions.
If the error has been eliminated, you will
see the message “Navigation being acti-
vated. Please obey all traffic rules”.