MERCEDES-BENZ CL-Class 2004 C215 Comand Manual

92 Telephone*Telephone operationAutomatically
The telephone* is automatically activated
when the COMAND is switched on. The
mobile phone must be inserted in the
mobile phone cradle* at the time
COMAND is switched on.
Manually
Press a.
The menu to enter the unlock code
(page 95) will appear (only if phone
has been locked before).GSM mobile phone:

Enter the PIN on the mobile phone.
If no SIM card is in the telephone,
the message
Check
SIM
Card
ap-
pears.

Insert a SIM card. Refer to the mo-
bile phone operator’s manual.

Switch the COMAND off (
page 23) or
turn off the engine.
The telephone* is switched off with a
time-lag of around 1 minute. If you
make a call within that time, the
telephone will be switched off around 1
minute after you end the call. or

In the Telephone menu (
page 94),
press a longer than two seconds.
The message
Deactivating Tele-
phone
will appear.
Switching telephone operation on
Switching telephone operation off

Telephone operation

93 Telephone*
Telephone operation
You can make an emergency call to an
emergency rescue station with a mobile
communication network.
The emergency call will be placed as long
as the corresponding mobile communicati-
on network is available. To do this, switch
the telephone on if you have not already
done so.

TDMA/CDMA mobile phone
The emergency call will also be placed
if the phone is locked (
page 94).

GSM mobile phone
If no SIM card is in the phone or SIM
PIN is not entered, you can only make
an emergency call at the mobile phone.
Emergency calls may not be possible with
all mobile phone networks or if certain net-
work services and/or telephone functions
are active. Check with your local network
operating company.
If you cannot make an emergency call, you
must initiate rescue measures yourself.
Emergency call “911”iThis function places a call to the local
911 provider. It does not initiate a
Tele Aid* call.
Warning
G
The 911 emergency call system is a public
service. Using it without due cause is a cri-
minal offense.

94 Telephone*Telephone operationInitiating an emergency call
Telephone is locked
Press the
911
soft key.
The system opens an inquiry menu
prompting if you want to dial a “911”
call.
The selection marker in the inquiry
menu should be on
Yes
.

If necessary, press H to select Yes
.

Press E to confirm
Yes
if you want to
place the “911” emergency call.
The emergency call will be placed.

Wait until the emergency rescue
station answers and describe the
emergency.
If you do not want to place the emergency
call:

Press h to select
No
when the
inquiry menu appears.

Press E to confirm
No
. Telephone is ready for operation

Press a repeatedly until the
telephone menu is displayed.

Press 9, 1 and 1 one after the
other.

Press E.
The emergency call will be placed.

Wait until the emergency rescue
station answers and describe the
emergency.

95 Telephone*
Telephone operation
Entering the unlock code
Use the number keys 1 through 0
to enter the four-digit unlock code.
Asterisks instead of digits will appear in
the input line.

Press the
OK
soft key.
If entered code is correct and the pho-
ne is registered in a network, the phone
is ready for use.GSM mobile phone
Entering the PIN code

Enter the four-digit PIN code on the
mobile phone. Refer to the mobile pho-
ne operator’s manual on how to do this.
If no SIM card is in the telephone, the
message
Check
SIM
Card
appears.

Insert a SIM card. Refer to the mo-
bile phone operator’s manual.
Entry incorrect:
You will hear a warning sound.

You need to re-enter your PIN code.
Entering codes
iYour unlock code prevents unauthori-
zed persons from using your telephone.
B e s u re t o m em o ri z e t hi s c o d e , a f o u r d i -
git number, carefully.
If you enter an incorrect code, the sys-
tem returns to the menu for entering the
unlock code.iYou must always enter the unlock code
when you switch on the telephone the
first time (if phone is in locked mode). Warning
G
When in the enter lock code screen, the
emergency number 911 (default input) will
be dialed if you press “1” longer than 2 se-
conds.
The 911 emergency call system is a public
service. Using it without due cause is a cri-
minal offense.
!If the PIN is entered incorrectly three
times in a row, the SIM card will be
blocked. The message
PIN Blocked

is displayed briefly. After that the
message
Please Enter PUK on
Cell Phone
is displayed.

96 Telephone*Telephone operationEntering the PUK
If you enter your PIN incorrectly three
times in a row, you need to enter the PUK
number.
The PUK can only be entered at the mobile
phone. Refer to the mobile phone
operator’s manual.When the COMAND is switched on, you
can switch to telephone operation from
any other system (e.g. radio):

Press a.
The Telephone menu will appear.The telephone is ready for operation
Message
Ready
and the reception
strength Ö are shown on the status bar.
Other messages

ROAMING The telephone is using a non home type
system

no Serv.The telephone is not logged into a net-
work
Fault messages:
Telephone Not Inserted
Plug the mobile phone into the mobile
phone cradle*. Refer to the separate
mobile phone operator’s manual.
Telephone Not InstalledYour vehicle may not have a mobile phone
cradle* installed and/or the telephone
control unit may not be coded properly.
Contact an authorized Mercedes-Benz
Center.
iThe PUK number is provided by your
telephone service provider.
Switching to telephone operation

97 Telephone*
Telephone operation
You can use the following functions in the
telephone menu:
Entering a telephone number
(page 98)

Use the redial function (
page 99)

Displaying the dialed numbers list
(page 100)

Displaying the answered calls list
(page 101)

Use speed-dialing (
page 102)

Use quick-dialing (
page 102)

Displaying the phone book
(page 104)

Adjusting balance/fader settings
(page 25)The system detects an incoming call, the
phone rings.
Incoming calls are indicated in a window in
any system (e.g. radio).
The window shows:

the caller’s number if it is transmitted
or

the caller’s name if her or his name and
number are saved in the phone book.Accepting a call

Press k.
or

Press E.
The display will change to the
call menu (
page 102). An active
audio source will be muted. You talk
over the hands-free set.
Rejecting a call

Press K.
or

Press H to highlight
Reject
and
than press E.
Incoming call

98 Telephone*Telephone operationSetting the volume for hands-free ope-
ration
Raising the volume
Turn the rotary control on the e but-
ton to the right.
Lowering the volume

Turn the rotary control on the e but-
ton to the left.
For more information, see chapter “At
a glance” (
page 23).
Sound settings
You can change the sound settings (only
Bal/Fad) during a conversation.
For more information, see chapter “At a
glance” (
page 25).
Additional control functions are explained
at “Active Call” (
page 102).
Ending a call

Press K.You can use the following functions to
make a phone call:

Dialing a telephone number
(page 98)

Redial (
page 99)

Selecting an entry from the dialed
numbers list (
page 100)

Selecting an entry from the answered
calls list (
page 101)

Use speed-dialing (
page 102)

Use quick-dialing (
page 102)

Selecting a phone book entry and
dialing the number (
page 105)Dialing a telephone number
Entering a telephone number

Open the Telephone menu
(page 96).

Use the number keys 1 - 0 to enter
the telephone number.
Deleting the last or several digits:
Press the
Delete
soft key once or
several times.
Deleting all digits:

Press K.
or

Press and hold
Delete
soft key for
more than 2 seconds.
Outgoing calls

99 Telephone*
Telephone operation
Begin dialing
When you have entered the telephone
number, press k to confirm your
input.
or

In the Telephone menu, press the
Send

soft key.
or

Press E.Dialing will begin. If a name is associa-
ted with the phone number saved in the
phone book, the name appears on the
screen. In the status bar, the off-hook
symbol will appear.
COMAND will mute an active audio
source. If the person called answers
the call, the call is active. You talk over
the hands-free set.
Ending a call

Press K.
or

Press the
End
soft key.Subsequent dialing
Transmitting other dial tones:

During a call you can press the number
keys 1 through 0, # and *.
Redial

Press k twice.
The telephone dials the number that
was dialed last.iIf you press k just once, the dialed
numbers list is displayed (
page 100).

100 Telephone*Telephone operationSelecting an entry from the dialed
numbers list
The COMAND automatically generates a
list of the last 10 numbers dialed. The list
is sorted chronologically with the most
recently dialed number at the top of the
list.
Displaying the list
In the Telephone menu (
page 96),
press the
Redial
soft key.
or

In the Telephone menu (
page 96),
press the
Calls
soft key.
The list is displayed and the most
recently dialed number is highlighted. The status bar shows:

the caller’s name if her or his name and
number are stored in the phone book

the message
Unknown
Name
if no entry
is available
You can select the following functions:

Changing the list display

Selecting an entry and begin dialing

Ending a call (
page 99)Changing the list display

Press the
ABC
soft key.
The display changes to names.
or

Press the
123
soft key.
The display changes to numbers.
Selecting an entry and begin dialing

Use g or G to select the desired
entry.

Press k.
or

Press E.
The telephone dials the number.

101 Telephone*
Telephone operation
Selecting an entry from the answered
calls list
The COMAND automatically generates a
list of the last 10 calls received. The list is
sorted chronologically with the most
recently received call at the top of the list.
Displaying the list
In the
Dialed
numbers list
(
page 100), press h until
Answered
calls list appears.
The list is displayed and the most
recently dialed number is highlighted. The status bar shows:

the caller’s name if her or his name and
number are stored in the phone book

the message
Unknown
Name
if no entry
is available

the telephone numberYou can select the following functions:

Changing list display (
page 100)

Selecting an entry and begin dialing
(page 100)

Ending a call (
page 99)
Missed calls
If there are one or more missed calls avai-
lable on the mobile phone, a correspon-
ding message will appear.

Press the
Back
soft key to return to the
Telephone menu.