reset MERCEDES-BENZ CL-Class 2005 C215 Comand Manual

83 Satellite radio*
Satellite radio operation
You can use the following functions:
Saving stations manually

Selecting a station from the Satellite
preset memory (
page 84)

Selecting a station by entering the
channel number (
page 82)Saving station manually
In the Satellite radio main menu

Press one of the number keys, e.g. 2,
longer than 2 seconds.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
page 201).
The satellite radio saves the current
station at the memory preset selected.
The memory preset selected will ap-
pear in the status line, e.g.
SAT2
.On the memory list

In the Satellite radio main menu, press
the
Presets
soft key.
The SAT preset memory will appear.

Use G or g to select a memory pre-
set.

Press E
longer than 2 seconds.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
page 201).
The satellite radio saves the current
station at the memory preset selected.
You will see the Satellite radio main menu

automatically after 8 seconds

if you press s.
Memory functionsiThere are 10 presets available.
iAn existing entry is overwritten in the
memory list when a new input is given.

84 Satellite radio*Satellite radio operationSelecting a station on the memory list
In the Satellite radio main menu, press
the
Presets
soft key.
The SAT preset memory will appear.

Use g or G to highlight a memory
preset.

Press E.
The Satellite radio main menu will then
appear automatically after 8 seconds,
indicating the memory preset number
in the status line.

In the Satellite radio main menu, press
the
Info
soft key.
The information display will appear.
You will see (if available)

the full station name

additional program information

Press the
Back
soft key to switch back
to the Satellite radio main menu.
Displaying information

148 NavigationDuring route guidanceYou can now enter the length of the route
section to be blocked.
Press the
More
soft key until the
desired length is set.

Press the
Less
soft key to reduce the
length of the traffic jam.

Press E.
The system calculates a new route
around the blocked route section.Switching off

Activate the soft key display by
pressing any soft key (
page 144).

Press the
Detour
soft key.

Press g to select
Delete Detour
.

Press E.
The blocked route section is deleted.
The system calculates the new route.Changing the blocked route section

Activate the soft key display
(page 144).

Press the
Detour
soft key.

Use G to select item
Reset Detour
.

Press E.
You can now change the length of the
route section to be blocked.

Press the
More
soft key until the
desired length is set.

Press the
Less
soft key to reduce the
length of the blocked route section.

Press E.
The system calculates a new route
around the blocked route section.
iThe route directly in front of the current
position can be blocked in the range of
0 to 6.2 miles.

197 System settings
System settings
Voice control system*
Reset function

198 System settingsSystem settings

System settings
Press C.

In the Service main menu, press the System
soft key.
System settings menu
In the System settings menu you can:
set date and time

switch verification and notification
tones on and off (
page 201)

adjust display settings (
page 201)

activate and deactivate the Voice
control system* help window
(page 203)

start Voice control system*
individualization (
page 203)

reset system settings (
page 204)Setting date
Activating the System settings
menu
Setting the date/time iExact settings of date, time and current
time zone allow you:
correct navigation for
routes with time-dependent traffic
guidance

correct calculation of the expected
time of arrival
iIf time/date information is transmitted
by the GPS, you cannot set the date.
A satellite symbol is displayed on the
status bar if the system uses GPS data.

204 System settingsReset function

Reset functionUse this function to reset the current
settings of the COMAND to the factory
settings.
In the System settings menu, press the Reset
soft key.
An inquiry menu will appear.If you do not wish to reset to the factory
settings

Press E and confirm with
No
.
The System settings menu will appear.
Accepting factory settings

Press H to select
Yes
and press E.
The inquiry menu Loss of Data Are
You Sure You Want to Reset?
will
appear.

Press H to select
Yes
and press E.
The message
All Data Has Been
Reset COMAND Will Now Restart
will appear.
iAll your personal data, e.g. address
book entries, SMS messages and
destination memory entries, will be
deleted.
iThe factory settings are:
Time - Atlantic Time
Verification tone - On
Notification tone - On
Display setting - Automatic

214 IndexStarting
route guidance 139
Station
radio station
station selection via direct
frequency entry (FM, AM) 38
station selection via number
keypad (presets) 38
satellite radio* station
station selection via direct channel
entry 82
Switching
between subject and sender 170
between subtitles (DVD
operation) 73
between text and sender 171
the GPS info setting on/off 154
to CD mode 46
to MP3-CD operation 56
to telephone* operation 96Switching off
COMAND 27
hands-free microphone 103
telephone operation 92
Switching on
CD operation
CD changer* 48
CD drive 48
COMAND 27
hands-free microphone 103
satellite radio* operation 80
telephone operation 92
T
Tele Aid* 189
TELEPHONE NOT INSERTED 91, 96
TELEPHONE UNAVAILABLE 91, 96
TO PREVENT THE DRIVER FROM BEING
DISTRACTED, THE PICTURE IS FADED
OUT. 63
TRANSMITTING DATA 108, 181TRANSMITTING DATA TO
TELEPHONE 172
Treble 30
V
Via function 146
Voice control system* 203
Help Window 203
Individualization 203
Voice instructions 139
Volume
adjusting
at the COMAND 28
automatic volume control 28