reset MERCEDES-BENZ CL-Class 2005 C215 Comand Manual

Contents
Last destinations and destination
memory . . . . . . . . . . . . . . . . . . . . . . . 155
Last destinations memory . . . . . . 155
Destination memory . . . . . . . . . . . 156
POIs (Points of Interest) . . . . . . . . . . . 160
Entering POIs . . . . . . . . . . . . . . . . 160
Selecting a POI around
your current location . . . . . . . . . . 161
Selecting a POI around another
location . . . . . . . . . . . . . . . . . . . . 162
Selecting a POI around a global
destination . . . . . . . . . . . . . . . . . . 163
Selecting a POI on the map . . . . . 164
Software Updates . . . . . . . . . . . . . . . 166Service . . . . . . . . . . . . . . . . . . . . . . . 167
Service main menu. . . . . . . . . . . . . . . 168
Activating the Service main menu 168
SMS (Mail) . . . . . . . . . . . . . . . . . . . . . 169
SMS Inbox . . . . . . . . . . . . . . . . . . 169
Reading SMS message received. . 171
Saving a sender phone number . . 172
Deleting a SMS message* . . . . . . 175Address book . . . . . . . . . . . . . . . . . . . 176
Activating the Address book
menu . . . . . . . . . . . . . . . . . . . . . . 176
Entries in the address book . . . . . 176
Selecting an entry. . . . . . . . . . . . . 177
Details on an address book entry . 178
Details on a mobile phone internal
memory entry . . . . . . . . . . . . . . . . 182
New address book entry . . . . . . . . 185
Deleting an address book entry . . 186
Using an address book entry
in other system modes . . . . . . . . . 187
Tele Aid* . . . . . . . . . . . . . . . . . . . . . . 189
General . . . . . . . . . . . . . . . . . . . . . 189
Emergency call . . . . . . . . . . . . . . . 189
Roadside Assistance. . . . . . . . . . . 190
Information call. . . . . . . . . . . . . . . 191
Remote Door Unlock and
Stolen Vehicle Recovery . . . . . . . . 192
Entering data . . . . . . . . . . . . . . . . . . . 193
Input via selection menu. . . . . . . . 193
Input via 12-button keypad. . . . . . 195
System settings. . . . . . . . . . . . . . . . 197
System settings . . . . . . . . . . . . . . . . . 198
Setting the date/time . . . . . . . . . 198
Switching verification and
notification tones on and off . . . . . 201
Making display settings . . . . . . . . 201
Voice control system* . . . . . . . . . . . . 203
Voice control system* functions . 203
Reset function . . . . . . . . . . . . . . . . . . 204Glossary . . . . . . . . . . . . . . . . . . . . . . 205index . . . . . . . . . . . . . . . . . . . . . . . . . 209

13 At a glance
Radio operating elements
Function
Page
1
Audio menu
34
2
Soft keys
(multifunction keys)
3
Color display with Radio
main menu
4
1 - 0
Station selection
Saving stations manually
Selecting a station from
the preset memory
38
40
42
5
H,h,g,G
Function selection
g and G
e.g.
Automatic seek tuning
H and h
e.g. Manual tuning
37
37
Function
Page
6
E Confirm
7
J
Muting
35
8
Volume control
28
9
e Switching on and off
27
a,
b
d and D
Automatic seek tuning
Manual tuning
37
37

37 Audio
Radio operation
You can use the following functions:
Automatic seek tuning (
page 37)

Manual tuning (
page 37)

Station selection from the Preset menu
(page 38)

Station selection via direct frequency
entry (FM, AM) (
page 39)

Automatic station scan (FM, AM)
(page 39)

Station selection from the FM/AM
Autostore presets (
page 43)Automatic seek tuning

Press g or h.
or

Press g or G.
FM and AM Bands, Weather Band (WB)
The radio will tune in to the next receivable
station (FM, AM) or channel (WB) with de-
scending/ascending frequency depending
on the direction of seek.
WB
Alternatively, you can select the channel
directly:

Press a number key 1 through 7.Manual tuning (FM, AM)

Activate the desired wave band
(page 36).

Press g or h longer than 2 se-
conds.
The function is active.
or

Press H or h.
The frequency will change by the tuning
increments for the respective
waveband each time one of the buttons
is pressed.
FM Band
The frequency displayed will change in in-
crements of 0.2 MHz.
AM Band
Tuning will take place in increments of
10 kHz.
Selecting a station
iThe selected channel is not shown in
the status line.

38 AudioRadio operationStation selection via number keypad
(presets)
FM and AM Bands
Press one of the number keys, such as
2 briefly.
The radio will tune to the frequency as-
signed to that memory location. If none
has been set by you, the radio will not
change the station.Station selection via direct frequency
entry (FM, AM)
E.g.: 102.7 MHz in the FM band

Activate the desired waveband
(page 36).

Press *.
An input line will appear.

Enter the desired frequency with the
number keys within 8 seconds, e.g.
1027 for 102.7 FM.
The station you have selected will
begin to play.
iFM and AM presets are independent
and can only be accessed while in the
corresponding band.
Saving stations for FM and AM
(page 40).
Frequency band
Frequency range
FM
AM
87.7 - 107.9 FM
530 - 1710 AM

40 AudioRadio operationYou can use the following functions:
Saving stations manually (FM, AM)

Saving stations automatically FM, AM
(page 41)

Selecting a station from the FM/AM
Preset menu (
page 42)

Selecting a station from the FM/AM
Auto presets (
page 43)Saving stations manually (FM, AM)
In the Radio main menu

Activate the desired waveband
(page 36).

Press one of the number keys, e.g. 2,
longer than 2 seconds.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
page 201).
The radio saves the current station at
the memory preset selected. The me-
mory preset selected will appear in the
status line, e.g. “FM2”.On the memory list

Activate the desired waveband
(page 36).

Press the
Presets
soft key.
The memory Preset menu will appear.

Use H, h or g, G to highlight
the desired memory preset.

Press E
longer than 2 seconds.
The current station will be saved at the
memory preset selected.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
page 201).
Memory functions
iThere are 10 presets available (1 -
9, 0).
An existing entry is overwritten in the
memory list when a new input is given.

41 Audio
Radio operation
You will see the Radio main menu
automatically after 8 seconds

if you press the
Back
soft key.Saving stations automatically (FM, AM)

Activate the desired waveband
(page 36).

Press the
Autost.
soft key
.
The autostore presets will appear.

Press E and confirm
Reprogram
Autostore
.
The autostore function is active. The
radio stores the 10 stations with the
strongest signal. The station
frequencies available will appear in the
memory list.
iThere are 2 presets for each of the FM
and AM waveband, standard FM/AM
presets (saving stations manually) and
Auto presets (saving stations automati-
cally).
The standard FM/AM presets are not
affected by the Auto presets. This is a
second option for storing a station ran-
ge you are currently receiving.
iThere are 10 presets available (1 -
9, 0).
The autostore function assigns the sta-
tions to the memory locations in the or-
der of their reception quality.

42 AudioRadio operationSelecting a station from the preset
menu (FM, AM)
Activate the FM or AM memory
(page 40).
You can use one of the following two ways
to select a station from the FM/AM
presets

Press the corresponding number key,
e.g. 3, to select the desired station.
or

Use H, h or g, G to highlight a
memory preset in the FM/AM preset
list.

Press E.
In both cases, you will see the Radio
main menu
automatically after 8 seconds

if you press the
Back
soft key.
The Radio main menu indicating the
memory preset number appears.

43 Audio
Radio operation
Selecting a station from the FM/AM
autostore presets
Activate the FM or AM autostore pre-
sets (
page 41).

Use H, h or g, G to highlight a
memory position.

Press E.
You will see the Radio main menu
automatically after 8 seconds

if you press the
Back
soft key.

80 Satellite radio*Satellite radio operation

Satellite radio operationAfter the connection is made:
Follow the instructions given by the
operator.
The activation process may take up to
10 minutes. If it is successful, you will
see the display with the message Acquiring Signal...
(page 80)
followed by the Satellite radio main
menu (
page 80).See “Subscribing to satellite radio” for im-
portant subscription information
(
page 79).

Press B to switch to satellite radio
operation.
When switching to Satellite radio ope-
ration, the system may have to acquire
the signal. The signal may also be inter-
rupted from time to time during opera-
tion for a variety of reasons
(page 78) and may have to be re-
acquired. If so, you will see the above
message on the display.After the COMAND acquires the
signal, the Satellite radio main menu will
appear. The station last tuned to will begin
to play.
Satellite radio main menu1Program category
2Station name
3Memory preset selected and channel
number
iCredit card information may be re-
quired for your application.
If a satellite receiver is not installed or
not properly installed:
The message
No Satellite Radio

will appear.
Switching on

81 Satellite radio*
Satellite radio operation
Muting
Press J while listening to the satel-
lite radio.
The symbol R will appear in the symbol
bar.

Press J again to resume listening to
the current station.
The symbol R will have disappeared.Satellite radio stations are split up into ca-
tegories. You can select between various
c a t e g o r i e s s u c h a s N e w s , S p o r t s N e w s a n d
Country Music, if available. The category
list is sorted alphabetically.
Selecting a program category

Use H or h while the Satellite radio
main menu (
page 80) is being
displayed.
The previous or next program category
(alphabetical order) will appear in the
display. The station last tuned in the
new category will begin to play.You can use the following functions:

Automatic tuning

Automatic station scan (
page 82)

Station selection via direct channel
entry (
page 82)

Station selection from the preset menu
(page 84)
Automatic tuning

Use G or g while the Satellite radio
main menu is being displayed.
or

Press d or D.
The satellite radio will tune in to the nu-
merically previous or next receivable
station in the selected category.
iYou can display 2 in full:
Station information (
page 84)
iMuting will also be canceled if you
switch to an audio source, e.g. normal
radio, or if you alter the volume.
Changing the program category
Selecting a station